49
Coil Components (Relay Headers)
MC-R and MC-RC Series
I
Materials
I
Ordering Information
MC - 2 0 1 R C
1
2
Part
Material
Finish
Board
Iron
Nickel plating
Contacts
Hermetic seal
Glass
----------
Iron-nickel alloy
Solder dip
Series Name: MC
Number of Divisions
Indicated by number of divisions of output.
Phase Difference
Indicated by phase difference of output.
0 : 0
°
1 : 90
°
Suffix
Form of Case
R: Relay header
Characteristic Impedance
C : 75
Blank : 50
I
Features
1.
Excellent High Frequency Characteristics
The use of coils made with a special winding
method based on a lumped-constant design
provide a high degree of matching, low loss, and
high isolation.
2.Highly Reliable Design
The metal case is designed with a hermetically sealed
construction which contains inert gas. This permits
quality to be maintained over a long period.
3.Easy Soldering
The pre-soldering leads give easy soldering operations.
4.Prevention of Flux Creepage
Use of the supplied Teflon sheet permits the prevention
of solder flux creepage.
Item
Conditions
Standard
I
Product Specifications
Ratings
-10
to +65
95% Max.
Operating temperature range
Operating relative humidity
30 to 200 MHz
50 ohms, 75 ohms
0.5 W
Frequency range (Note)
Characteristic impedance (Note)
Maximum Input Power
1.Vibration
Frequency of 10 to 2000 Hz, overall amplitude of 1.5 mm,
acceleration of 98 m/s
2
for 4 hours in each of 3 directions
No damage, cracks, or parts dislocation
2.Shock
Acceleration of 294 m/s
2
, sine half-wave waveform, 3 cycles in each of the 3 axis
3.Temperature cycle
Temperature: -35
+5
to +35
+85
+5
to +35
Time: 30
15 max.
30
15 max. (Minutes)
5 cycles
G
The test method conforms to MIL-STD-202.
Note: The frequency range and the characteristic impedance will differ depending on the products.
3
4
5
6
1
2
3
4
5
6
I
External Dimensions
75 ohms Type (MC-RC Series)
50 ohms Type (MC-R Series)
MC-201RC
MC-202RC
MC-301RC
MC-212RC
MC-211RC
MC-213RC
MC-216RC
MC-214RC
MC-201R
MC-212R
MC-213R
I
Function Diagram
Teflon sheet (t=0.2)
Green hermetic seal
2, 3, 4, 5, and 6 are ground
3, 4, 7, and 8 are ground
3, 4, 7, and 8 are ground
3, 4, and 7 are ground