
MB96380 Series
DS07-13803-2E
119
9
2009-01-09
Format adjusted to official Fujitsu Microelectronics datasheet standard (mainly
style changes and official notes and disclaimer added)
Numbering of Electrical Characteristics subchapters automated
Note about devices under development modified
I/O map: Note added about reserved addresses
Serial programming interface: Note about handshaking pins improved
ICCPLL for CLKS1/2=80MHz, CLKB=40MHz (F388/F389) increased by 5mA
ICCSPLL for CLKS1/2=80MHz, CLKB=40MHz (F388/F389) increased by 0.8mA
(typ) and 1.3mA (max)
Updated ordering information: MB96384/385**A -> MB96384/385**B
Package code of MB96V300 corrected in ordering information
Internal LCD divider resistance value corrected: Typ 35kOhm -> 40kOhm, Max
50kOhm -> 65kOhm
Run and Sleep mode currents of ROM devices (MB96384/385) reduced
Added voltage condition to pull-up resistance and LCD divide resistance spec
Lineup: Term “Data Flash” replaced by “independent 32KB Flash”
Ordering information: column “Independent 32KB Data Flash” replaced by new
column “Flash/ROM”, column “Remarks” removed
Official package dimension drawing with additional notes added
Empty pages removed
MB96384/385 and MB96F385/F388/F389 separated in DC spec and currents of
these devices adjusted according to first evaluation results
Alarm comparator: Power supply current max values increased, comparison time
reduced, mode transition time and power-up stabilization time newly added
Handling devices: Notes added about Serial communication and about using
ceramic resonators.
Feature list and AC Characteristics: 16MHz maximum frequency is valid for crys-
tal oscillators. For resonators, maximum frequency depends on Q-factor
AC characteristics: PLL phase skew spec added, CLKVCO min=64MHz
VOL3 spec improved: spec valid for 3mA load for full Vcc range
C-Pin cap spec updated: 4.7uF-10uF capacitor with tolerance permitted
“Preliminary” watermark removed
Revision
Date
Modification