M
0.5
Ω
, Quad SPDT Switches in UCSP/QFN
_______________________________________________________________________________________
9
Detailed Description
The MAX4754/MAX4754A/MAX4755/MAX4756/MAX4756A
low on-resistance analog switches operate from a single
+1.8V to +5.5V supply. The devices are fully specified
for nominal 3V applications.
The MAX4754/MAX4754A DPDT switch have two logic
control inputs with each input controlling two SPDT
switches. Each switch has a 0.5
Ω
on-resistance in the
NO and NC terminals making it ideal for switching
audio signals.
The MAX4755 DPDT switch also has four 0.5
Ω
SPDT
switches with the switch pairs 1 and 2 adding an 11.5
Ω
series resistor to the NC terminal. This feature allows
the user to drive an 8
Ω
speaker as a 32
Ω
load, allowing
it to be used as an ear speaker. Two logic control
inputs are used to control the four switches.
The MAX4756/MAX4756A has four 0.5
Ω
SPDT switches
controlled by one logic control input (INA) and
EN
input
to disable the switches.
Applications Information
Digital Control Inputs
The MAX4754/MAX4754A/MAX4755/MAX4756/MAX4756A
logic inputs accept up to +5.5V regardless of the sup-
ply voltage. For example, with a +3.3V supply IN_ can
be driven low to GND and high to +5.5V, which allows
mixed logic levels in a system. Driving the control logic
inputs rail-to-rail also minimizes power consumption.
For a +3V supply voltage, the logic thresholds are 0.5V
(low) and 1.4V (high).
For the MAX4756/MAX4756A, drive
EN
low to enable the
COM_. When
EN
is high, COM _ is high impedance.
Analog Signal Levels
Analog signal inputs over the full voltage range (0V to
V+) are passed through the switch with minimal change
in on-resistance (see the
Typical Operating Charac-
teristics
). The switches are bidirectional so NO_, NC_,
and COM_ can be either inputs or outputs.
Power-Supply Bypassing
Power-supply bypassing improves noise margin and pre-
vents switching noise from propagating from the V+ sup-
ply to other components. A 0.1μF capacitor connected
from V+ to GND is adequate for most applications.
UCSP Applications Information
For the latest application details on UCSP construction,
dimensions, tape carrier information, printed circuit
board techniques, bump-pad layout, and recommend-
ed reflow temperature profile, as well as the latest infor-
mation on reliability testing results, go to the Maxim
website at www.maxim-ic.com/ucsp for the Application
Note:
UCSP—A Wafer-Level Chip-Scale Package
.
MAX4754/
MAX4754A
INA
NO1
NC1
NO2
NC2
NO3
NC3
NO4
NC4
INB
COM3
COM4
COM1
COM2
HEADPHONE
(32
Ω
)
INTERNAL
SPEAKER (8
Ω
)
MAX4755
INA
NO1
NC1
NO2
NC2
NO3
NC3
NO4
NC4
INB
COM3
COM4
CAR-KIT SPEAKER (8
Ω
)
COM1
COM2
EAR SPEAKER (32
Ω
)
LOUD SPEAKER (8
Ω
)
MAX4756/
MAX4756A
NO1
NC1
NO2
NC2
NO3
NC3
NO4
NC4
EN
COM3
COM4
COM1
COM2
HEADPHONE
(32
Ω
)
11
Ω
11
Ω
INA
INTERNAL
SPEAKER (8
Ω
)
Typical Operating Circuit