參數資料
型號: MAX3223EETP+
廠商: Maxim Integrated Products
文件頁數: 3/19頁
文件大?。?/td> 0K
描述: IC TXRX RS232 250KBPS SD 20-TQFN
產品培訓模塊: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
標準包裝: 60
類型: 收發器
驅動器/接收器數: 2/2
規程: RS232
電源電壓: 3 V ~ 5.5 V
安裝類型: 表面貼裝
封裝/外殼: 20-WQFN 裸露焊盤
供應商設備封裝: 20-TQFN-EP(5x5)
包裝: 管件
產品目錄頁面: 1405 (CN2011-ZH PDF)
±15kV ESD-Protected, 1A, 3.0V to 5.5V, 250kbps,
RS-232 Transceivers with AutoShutdown
Level 4 (the highest level) of IEC1000-4-2, without the
need for additional ESD-protection components.
The major difference between tests done using the
Human Body Model and IEC1000-4-2 is higher peak
current in IEC1000-4-2, because series resistance is
lower in the IEC1000-4-2 model. Hence, the ESD with-
stand voltage measured to IEC1000-4-2 is generally
lower than that measured using the Human Body
Model. Figure 7a shows the IEEE1000-4-2 model and
Figure 7b shows the current waveform for the ±8kV
IEC1000-4-2 Level 4 ESD contact-discharge test.
The air-gap test involves approaching the device with a
charged probe. The contact-discharge method connects
the probe to the device before the probe is energized.
Machine Model
The Machine Model for ESD tests all pins using a 200pF
storage capacitor and zero discharge resistance. Its
objective is to emulate the stress caused by contact that
occurs with handling and assembly during manufactur-
ing. Of course, all pins require this protection during
manufacturing, not just RS-232 inputs and outputs.
Therefore, after PC board assembly, the Machine Model
is less relevant to I/O ports.
___________Applications Information
Capacitor Selection
The capacitor type used for C1–C4 is not critical for
proper operation; either polarized or nonpolarized
capacitors may be used. The charge pump requires
0.1F capacitors for 3.3V operation. For other supply
voltages, refer to Table 3 for required capacitor values.
Do not use values smaller than those listed in Table 3.
Increasing the capacitor values (e.g., by a factor of 2)
reduces ripple on the transmitter outputs and slightly
reduces power consumption. C2, C3, and C4 can be
increased without changing C1’s value. However, do
not increase C1 without also increasing the values of
C2, C3, and C4 to maintain the proper ratios (C1 to
the other capacitors).
CHARGE-CURRENT
LIMIT RESISTOR
DISCHARGE
RESISTANCE
STORAGE
CAPACITOR
Cs
100pF
RC 1M
RD 1500
HIGH-
VOLTAGE
DC
SOURCE
DEVICE
UNDER
TEST
CHARGE CURRENT
LIMIT RESISTOR
DISCHARGE
RESISTANCE
STORAGE
CAPACITOR
Cs
150pF
RC 50M to 100M
RD 330
HIGH-
VOLTAGE
DC
SOURCE
DEVICE
UNDER
TEST
Figure 7a. IEC1000-4-2 ESD Test Model
tr = 0.7ns to 1ns
30ns
60ns
t
100%
90%
10%
I PEAK
I
Figure 7b. IEC1000-4-2 ESD Generator Current Waveform
Figure 6a. Human Body ESD Test Models
IP 100%
90%
36.8%
tRL
TIME
tDL
CURRENT WAVEFORM
PEAK-TO-PEAK RINGING
(NOT DRAWN TO SCALE)
Ir
10%
0
AMPERES
Figure 6b. Human Body Model Current Waveform
Maxim Integrated
11
MAX3221E/MAX3223E/MAX3243E
相關PDF資料
PDF描述
MS27467E15B5PC CONN PLUG 5POS STRAIGHT W/PINS
MAX211ECAI+T IC TXRX RS-232 W/CAP 28-SSOP
MAX14950ACTL+ IC EQUALIZER/REDRVR QUAD 40-TQFN
MS27473E10A35PC CONN PLUG 13POS STRAIGHT W/PINS
MS27468T11F35PB CONN RCPT 13POS JAM NUT W/PINS
相關代理商/技術參數
參數描述
MAX3223EETP+ 功能描述:RS-232接口集成電路 3-5.5V 1Mbps Transceiver RoHS:否 制造商:Exar 數據速率:52 Mbps 工作電源電壓:5 V 電源電流:300 mA 工作溫度范圍:- 40 C to + 85 C 安裝風格:SMD/SMT 封裝 / 箱體:LQFP-100 封裝:
MAX3223EETP+T 功能描述:RS-232接口集成電路 3-5.5V 1Mbps Transceiver RoHS:否 制造商:Exar 數據速率:52 Mbps 工作電源電壓:5 V 電源電流:300 mA 工作溫度范圍:- 40 C to + 85 C 安裝風格:SMD/SMT 封裝 / 箱體:LQFP-100 封裝:
MAX3223EETP-T 功能描述:RS-232接口集成電路 RoHS:否 制造商:Exar 數據速率:52 Mbps 工作電源電壓:5 V 電源電流:300 mA 工作溫度范圍:- 40 C to + 85 C 安裝風格:SMD/SMT 封裝 / 箱體:LQFP-100 封裝:
MAX3223EEUP 功能描述:RS-232接口集成電路 RoHS:否 制造商:Exar 數據速率:52 Mbps 工作電源電壓:5 V 電源電流:300 mA 工作溫度范圍:- 40 C to + 85 C 安裝風格:SMD/SMT 封裝 / 箱體:LQFP-100 封裝:
MAX3223EEUP/V+ 功能描述:RS-232接口集成電路 RoHS:否 制造商:Exar 數據速率:52 Mbps 工作電源電壓:5 V 電源電流:300 mA 工作溫度范圍:- 40 C to + 85 C 安裝風格:SMD/SMT 封裝 / 箱體:LQFP-100 封裝: