參數資料
型號: MAX15008
廠商: Maxim Integrated Products, Inc.
英文描述: Automotive 300mA LDO Voltage Regulators with Tracker Output and Overvoltage Protector
中文描述: 用于汽車電子的300mA LDO穩壓器,提供跟蹤輸出和過壓保護
文件頁數: 13/23頁
文件大小: 479K
代理商: MAX15008
Detailed Description
The MAX15008/MAX15010 integrate a 300mA LDO
voltage regulator, a voltage tracker, and an OVP con-
troller. These devices operate over a wide 5V to 40V
supply voltage range and are able to withstand load-
dump transients up to 45V.
The MAX15008/MAX15010 feature a 300mA LDO regu-
lator that consumes less than 70μA of current under
light-load conditions and feature a fixed 5V or an
adjustable output voltage (1.8V to 11V). Connect
FB_LDO to ground to select a fixed 5V output voltage
or select the LDO output voltage by connecting an
external resistive voltage-divider at FB_LDO. The regu-
lator sources at least 300mA of current and includes a
current limit of 330mA (min). Enable the LDO by pulling
EN_LDO high.
The tracker can be powered from the LDO input sup-
ply voltage or an independent voltage source. It is
designed to supply power to a remote sensor and is
able to handle the severe conditions in automotive
applications. Set the tracker output voltage by con-
necting a resistive voltage-divider to OUT_TRK and
connecting ADJ to the tracking source. The tracker
feedback, FB_TRK, and a separate tracker reference
voltage input, ADJ, offer the flexibility of setting the
tracker output to be lower, equal to, or higher than the
main (LDO) output. Pull EN_TRK to SGND to turn the
tracker off and keep the device in always-on, low-
quiescent-current operation.
The OVP controller (MAX15008 only) relies on an exter-
nal MOSFET with adequate voltage rating (V
DSS
) to
protect downstream circuitry from overvoltage tran-
sients. The OVP controller drives the gate of the exter-
nal n-channel MOSFET, and is configurable to operate
as an overvoltage protection switch or as a closed-loop
voltage limiter.
GATE Voltage (MAX15008 Only)
The MAX15008 uses a high-efficiency charge pump to
generate the GATE voltage for the external n-channel
MOSFET. Once the input voltage, V
IN
, exceeds the
undervoltage lockout (UVLO) threshold, the internal
charge pump fully enhances the external n-channel
MOSFET. An overvoltage condition occurs when the
voltage at FB_PROT goes above the threshold voltage,
V
TH_PROT
. After V
TH_PROT
is exceeded, GATE is quick-
ly pulled to PGND with a 63mA pulldown current. The
MAX15008 includes an internal clamp from GATE to
SOURCE that ensures that the voltage at GATE never
exceeds one diode drop below SOURCE during gate
discharge. The voltage clamp also prevents the GATE-
to-SOURCE voltage from exceeding the absolute maxi-
mum rating for the V
GS
of the external MOSFET in case
the source terminal is accidentally shorted to 0V.
Overvoltage Monitoring (MAX15008 Only)
The OVP controller monitors the voltage at FB_PROT
and controls an external n-channel MOSFET, isolating,
or limiting the load during an overvoltage condition.
Operation in OVP switch mode or limiter mode
depends on the connection between FB_PROT and the
external MOSFET.
Overvoltage Switch Mode
When operating in OVP switch mode, the FB_PROT
divider is connected to the drain of the external
MOSFET. The feedback path consists of the voltage-
divider tapped at FB_PROT, FB_PROT’s internal
comparator, the internal gate charge pump/gate
pulldown, and the external n-channel MOSFET (Figure
1). When the programmed overvoltage threshold is
exceeded, the internal comparator quickly pulls GATE
to ground and turns off the external MOSFET,
disconnecting the power source from the load. In this
configuration, the voltage at the source of the
MOSFET is not monitored. When the voltage at
FB_PROT decreases below the overvoltage threshold,
the MAX15008 raises the voltage at GATE, reconnecting
the load to the power source.
M
Automotive 300mA LDO Voltage Regulators
with Tracker Output and Overvoltage Protector
______________________________________________________________________________________
13
IN
V
IN
FB_PROT
SGND
GATE
SOURCE
PROTECTOR
OUTPUT
MAX15008
Figure 1. Overvoltage Switch Configuration (MAX15008)
相關PDF資料
PDF描述
MAX15010 Automotive 300mA LDO Voltage Regulators with Tracker Output and Overvoltage Protector
MAX15009 Automotive 300mA LDO Regulators with Switched Output and Overvoltage Protector
MAX15011 Automotive 300mA LDO Regulators with Switched Output and Overvoltage Protector
MAX15024 Single/Dual, 16ns, High Sink/Source Current Gate Drivers
MAX15025 Single/Dual, 16ns, High Sink/Source Current Gate Drivers
相關代理商/技術參數
參數描述
MAX15008ATJ+ 功能描述:低壓差穩壓器 - LDO Automotive 300mA w/Tracker Output RoHS:否 制造商:Texas Instruments 最大輸入電壓:36 V 輸出電壓:1.4 V to 20.5 V 回動電壓(最大值):307 mV 輸出電流:1 A 負載調節:0.3 % 輸出端數量: 輸出類型:Fixed 最大工作溫度:+ 125 C 安裝風格:SMD/SMT 封裝 / 箱體:VQFN-20
MAX15008ATJ+T 功能描述:低壓差穩壓器 - LDO Automotive 300mA w/Tracker Output RoHS:否 制造商:Texas Instruments 最大輸入電壓:36 V 輸出電壓:1.4 V to 20.5 V 回動電壓(最大值):307 mV 輸出電流:1 A 負載調節:0.3 % 輸出端數量: 輸出類型:Fixed 最大工作溫度:+ 125 C 安裝風格:SMD/SMT 封裝 / 箱體:VQFN-20
MAX15008EVKIT+ 功能描述:電源管理IC開發工具 MAX15008 Eval Kit RoHS:否 制造商:Maxim Integrated 產品:Evaluation Kits 類型:Battery Management 工具用于評估:MAX17710GB 輸入電壓: 輸出電壓:1.8 V
MAX15009ATJ+ 功能描述:低壓差穩壓器 - LDO Automotive 300mA w/Switched Output RoHS:否 制造商:Texas Instruments 最大輸入電壓:36 V 輸出電壓:1.4 V to 20.5 V 回動電壓(最大值):307 mV 輸出電流:1 A 負載調節:0.3 % 輸出端數量: 輸出類型:Fixed 最大工作溫度:+ 125 C 安裝風格:SMD/SMT 封裝 / 箱體:VQFN-20
MAX15009ATJ+T 功能描述:低壓差穩壓器 - LDO Automotive 300mA w/Switched Output RoHS:否 制造商:Texas Instruments 最大輸入電壓:36 V 輸出電壓:1.4 V to 20.5 V 回動電壓(最大值):307 mV 輸出電流:1 A 負載調節:0.3 % 輸出端數量: 輸出類型:Fixed 最大工作溫度:+ 125 C 安裝風格:SMD/SMT 封裝 / 箱體:VQFN-20