參數資料
型號： M38073M4-242FP
廠商： Mitsubishi Electric Corporation
英文描述： SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
中文描述： 單芯片8位CMOS微機
文件頁數： 39/74頁
文件大?。?/td> 1182K
代理商： M38073M4-242FP
39
3807 Group
MITSUBISHI MICROCOMPUTERS
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
[
Transmit Buffer Register/Receive Buffer Register
] TB/RB (0018
16
)
The transmit buffer and the receive buffer are located in the same
address. The transmit buffer is write-only and the receive buffer is
read-only. If a character bit length is 7 bits, the MSB of data stored in
the receive buffer is "0".
[Serial I/O 1 Status Register] SIO1STS (0019
16
)
The read-only serial I/O1 status register consists of seven flags (b0
to b6) which indicate the operating status of the serial I/O1 function
and various errors. Three of the flags (b4 to b6) are only valid in
UART mode. The receive buffer full flag (b1) is cleared to "0" when
the receive buffer is read.
The error detection is performed at the same time data is transferred
from the receive shift register to the receive buffer register, and the
receive buffer full flag is set. A writing to the serial I/O1 status regis-
ter clears all the error flags OE, PE, FE, and SE (b3 to b6, respec-
tively). Writing "0" to the serial I/O1 enable bit (SIOE : b7 of the serial
I/O1 control register) also clears all the status flags, including the
error flags.
All bits of the serial I/O1 status register are initialized to "0" at reset,
but if the transmit enable bit (b4) of the serial I/O1 control register
has been set to "1", the transmit shift register shift completion flag
(b2) and the transmit buffer empty flag (b0) become "1."
[Serial I/O1 Control Register] SIO1CON (001A
16
)
The serial I/O1 control register contains eight control bits for serial
I/O1 functions.
[UART Control Register] UARTCON (001B
16
)
The UART control register consists of four control bits (b0 to b3)
which are valid when asynchronous serial I/O is selected and set the
data format of an data transfer. One bit in this register (b4) is
always valid and sets the output structure of the P4
5
/TxD pin.
[Baud Rate Generator] BRG (001C
16
)
The baud rate generator determines the baud rate for serial transfer.
With the 8-bit counter having a reload register the baud rate genera-
tor divides the frequency of the count source by 1/(n+1), where n is
the value written to the baud rate generator.
b7
b7
Transmit buffer empty flag (TBE)
0: Buffer full
1: Buffer empty
Receive buffer full flag (RBF)
0: Buffer empty
1: Buffer full
Transmit shift register shift completion flag (TSC)
0: Transmit shift in progress
1: Transmit shift completed
Overrun error flag (OE)
0: No error
1: Overrun error
Parity error flag (PE)
0: No error
1: Parity error
Framing error flag (FE)
0: No error
1: Framing error
Summing error flag (SE)
0: (OE) U (PE) U (FE)=0
1: (OE) U (PE) U (FE)=1
Not used (returns "1" when read)
Serial I/O1 status register
(SIO1STS : address 0019
16
)
Serial I/O1 control register
(SIO1CON : address 001A
16
)
BRG count source selection bit (CSS)
0: f(X
IN
) (f(X
CIN
) in low-peed mode)
1: f(X
IN
)/4 ((X
CIN
)/4 in low-speed mode)
b0
b0
Serial I/O1 synchronous clock selection bit (SCS)
0: BRG/ 4
(when clock synchronous serial I/O is selected)
BRG/16 (UART is selected)
1: External clock input
(when clock synchronous serial I/O is selected)
External clock input/16 (UART is selected)
S
output enable bit (SRDY)
0: P4
7
pin operates as ordinaly I/O pin
1: P4
7
pin operates as S
RDY1
output pin
Transmit interrupt source selection bit (TIC)
0: Interrupt when transmit buffer has emptied
1: Interrupt when transmit shift operation is completed
Transmit enable bit (TE)
0: Transmit disabled
1: Transmit enabled
Receive enable bit (RE)
0: Receive disabled
1: Receive enabled
Serial I/O1 mode selection bit (SIOM)
0: Asynchronous serial I/O (UART)
1: Clock synchronous serial I/O
Serial I/O1 enable bit (SIOE)
0: Serial I/O1 disabled
(pins P4
4
to P4
7
operate as ordinary I/O pins)
1: Serial I/O1 enabled
(pins P4
4
to P4
7
operate as serial I/O pins)
b7
UART control register
(UARTCON : address 001B
16
)
Character length selection bit (CHAS)
0: 8 bits
1: 7 bits
Parity enable bit (PARE)
0: Parity cheching disabled
1: Parity checking enabled
Parity selection bit (PARS)
0: Even parity
1: Odd parity
Stop bit length selection bit (STPS)
0: 1 stop bit
1: 2 stop bits
P4
/T
D P-channel output disable bit (POFF)
0: CMOS output (in output mode)
1: N-channel open-drain output (in output mode)
Not used (return "1" when read)
b0
Fig. 37. Structure of serial I/O1 related register
相關PDF資料
PDF描述
M38073M4-245FP SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M38073M4-XXXFP Low-Power Configurable Multiple-Function Gate 6-SOT-23 -40 to 85
M38073M4A00FP SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M3807 Single Chip 8 Bits Microcomputer(8位單片機)
M38073M4-A01FP SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
相關代理商/技術參數
參數描述
M38078RFS 制造商:Renesas Electronics Corporation 功能描述:EMULATION MCU/8BIT CMOS EMULATION CHIP - Bulk
M3808 功能描述:電纜固定件和配件 LTRSCG 625 BLACK RoHS:否 制造商:Heyco 類型:Cable Grips, Liquid Tight 材料:Nylon 顏色:Black 安裝方法:Cable 最大光束直徑:11.4 mm 抗拉強度:
M3808 BK001 制造商:Alpha Wire Company 功能描述:CBL 10COND 18AWG BLK 1000'
M3808 BK002 制造商:Alpha Wire Company 功能描述:CBL 10COND 18AWG BLK 500'
M3808 BK005 制造商:Alpha Wire Company 功能描述:CBL 10COND 18AWG BLK 100'
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*