參數資料
型號： M37735EHLHP
元件分類： 微控制器/微處理器
英文描述： 16-BIT, OTPROM, MICROCONTROLLER, PQFP80
封裝： FINE PITCH, PLASTIC, QFP-80
文件頁數： 39/63頁
文件大小： 8367K
代理商： M37735EHLHP
CENTRAL PROCESSING UNIT (CPU)
7733 Group User’s Manual
2–6
2.1.7 Data bank register (DT)
The data bank register consists of 8 bits. In an addressing mode where the data bank register is used, the
contents of this register is processed as the high-order 8 bits (bank) of an address to be accessed, which
consists of 24 bits.
When setting a certain value to this register, execute the LDT instruction.
At reset, this register is cleared to “0016.”
g Addressing modes where the data bank register is used are listed below:
Direct indirect
Direct indexed X indirect
Direct indirect indexed Y
Absolute
Absolute bit
Absolute indexed X
Absolute indexed Y
Absolute bit relative
Stack pointer relative indirect indexed Y
2.1.8 Direct page register (DPR)
The direct page register consists of 16 bits. The contents of this register specifies a direct page area to
bank 016 or an area which extends banks 016 and 116. The direct page area can be accessed with two
bytes (Note) by using the direct page addressing mode.
The contents of the direct page register indicates the base address (the lowest address) of a direct page
area which is extended to 256 bytes above this address.
Values from 000016 to FFFF16 can be set to the direct page register. When a certain value equal to or more
than “FF0116” is set to the direct page register, the direct page area is specified to an area which extends
banks 016 and 116. When the contents of low-order 8 bits of the direct page register is cleared to “0016,”
the number of cycles required to generate the address to be accessed is decremented by 1. Therefore,
efficient access is possible.
At reset, this register is cleared to “000016.”
Figure 2.1.4 shows a setting example of direct page areas.
Note: For the DIV and MPY instructions, the direct page area is accessed with 3 bytes.
When accumulator B is used, for each instruction, the number of instruction bytes is incremented
by 1.
g Addressing modes where the direct page register is used are listed below:
Direct
Direct bit
Direct indexed X
Direct indexed Y
Direct indirect
Direct indexed X indirect
Direct indirect indexed Y
Direct indirect long
Direct indirect long indexed Y
Direct bit relative
2.1 Central processing unit
相關PDF資料
PDF描述
M37753M6C-XXXFP 16-BIT, MROM, 40 MHz, MICROCONTROLLER, PQFP80
M37754M6C-XXXHP 16-BIT, MROM, 40 MHz, MICROCONTROLLER, PQFP100
M37754M6C-XXXGP 16-BIT, MROM, 40 MHz, MICROCONTROLLER, PQFP100
M37754M8C-XXXGP 16-BIT, MROM, 40 MHz, MICROCONTROLLER, PQFP100
M37754S4CGP 16-BIT, 40 MHz, MICROCONTROLLER, PQFP100
相關代理商/技術參數
參數描述
M37735EHLXXXHP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:PROM VERSION OF M37735MHLXXXHP
M37735M4B 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M37735M4BXXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M37735M4L 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M37735M4LXXXHP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*