參數資料
型號： M3727GM6-XXXFP
元件分類： 微控制器/微處理器
英文描述： 8-BIT, MROM, 8.1 MHz, MICROCONTROLLER, PDSO42
封裝： 0.450 INCH, 0.80 MM PITCH, PLASTIC, SSOP-42
文件頁數： 94/129頁
文件大小： 1211K
代理商： M3727GM6-XXXFP
67
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER
and ON-SCREEN DISPLAY CONTROLLER
M3727GM6/M8–XXXSP/FP
M37272E8SP/FP
MITSUBISHI MICROCOMPUTERS
Rev. 1.0
The horizontal display start position is common to all blocks, and can
be set in 128 steps (where 1 step is 4TOSC, TOSC being the OSD
oscillation cycle) as values “0016” to “FF16” in bits 0 to 6 of the hori-
zontal position register (address 00D116). The horizontal position reg-
ister is shown in Figure 8.11.8.
Fig. 8.11.8 Horizontal Position Register
Notes 1 : 1TC (TC : OSD clock cycle divided in pre-divide circuit) gap occurs
between the horizontal display start position set by the horizontal
position register and the most left dot of the 1st block. Accordingly,
when 2 blocks have different pre-divide ratios, their horizontal dis-
play start position will not match.
2 : The horizontal start position is based on the OSD clock source cycle
selected for each block. Accordingly, when 2 blocks have different
OSD clock source cycles, their horizontal display start position will
not match.
3 : When setting “0016” to the horizontal position register, it needs ap-
proximately 62TOSC (= Tdef) interval from a rising edge (when nega-
tive polarity is selected) of HSYNC signal to the horizontal display start
position.
Fig. 8.11.9 Notes on Horizontal Display Start Position
4TOSC’ N
4TOSC N
HSYNC
1TC
Note 1
Note 2
Block 2 (Pre-divide ratio = 2, clock source = data slicer clock)
Block 3 (Pre-divide ratio = 3, clock source = data slicer clock)
Block 4 (Pre-divide ratio = 3, clock source = OSC1)
Tdef
Tdef’
N
: Value of horizontal position register (decimal notation)
1TC : OSD clock cycle divided in pre-divide circuit
TOSC : OSD oscillation cycle
Tdef
: 62 TOSC
b7 b6 b5 b4 b3 b2 b1 b0
Horizontal position register (HP) [Address 00D1 16]
B
Name
Horizontal Position Register
7
Horizontal display start
position control bits
(HP0 to HP6)
Nothing is assigned. This bit is a write disable bit.
When this bit is read out, the value is “0.”
Functions
After reset R W
Horizontal display start positions
128 steps (0016 to 7F16)
(1 step is 4TOSC)
0
RW
R —
0
to
6
Note: The setting value synchronizes with the V SYNC.
相關PDF資料
PDF描述
M37272M6-XXXFP 8-BIT, MROM, 8.1 MHz, MICROCONTROLLER, PDSO42
M37272M6-XXXSP 8-BIT, MROM, 8.1 MHz, MICROCONTROLLER, PDIP42
M37272M6-XXXSP 8-BIT, MROM, 8.1 MHz, MICROCONTROLLER, PDIP42
M37272M8-XXXFP 8-BIT, MROM, 8.1 MHz, MICROCONTROLLER, PDSO42
M37272MA-XXXSP 8-BIT, MROM, 8.1 MHz, MICROCONTROLLER, PDIP42
相關代理商/技術參數
參數描述
M3727GM6-XXXSP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER
M3727GM8-XXXSP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER
M37280EKSP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER
M37280EKSS 功能描述:EPROM MCU/8BIT CMOS EMULATION CH RoHS:否 類別:編程器，開發系統 >> 過時/停產零件編號 系列:- 標準包裝:1 系列:- 傳感器類型:CMOS 成像，彩色（RGB） 傳感范圍:WVGA 接口:I²C 靈敏度:60 fps 電源電壓:5.7 V ~ 6.3 V 嵌入式:否 已供物品:成像器板 已用 IC / 零件:KAC-00401 相關產品:4H2099-ND - SENSOR IMAGE WVGA COLOR 48-PQFP4H2094-ND - SENSOR IMAGE WVGA MONO 48-PQFP
M37280MF 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*