![](http://datasheet.mmic.net.cn/30000/M34502M4-XXXFP_datasheet_2359490/M34502M4-XXXFP_56.png)
4502 Group User’s Manual
HARDWARE
1-43
Fig. 38 State transition
Fig. 39 Set source and clear source of the P flag
Fig. 40 Start condition identified example using the SNZP in-
struction
S
R
Q
Power down flag P
POF or
POF2
instruction
Reset input
q Set source
q Clear source
Reset input
EPOF instruction +
POF or
POF2
instruction
EPOF instruction +
Program start
P = “1”
?
Yes
Warm start
Cold start
No
Reset
(Stabilizing
time a )
B
Operation source clock:
ceramic resonator
Ring oscillator: stop
RC oscillation circuit: stop
A
Operation source clock:
ring oscillator clock
Ceramic resonator:
operating (Note 2)
RC oscillation circuit: stop
C
Operation source clock:
RC oscillation
Ring oscillator: stop
Ceramic resonator: stop
CMCK instruction
execution (Note 3)
CRCK instruction
execution (Note 3)
Voltage drop
detected
Key-on wakeup
(Stabilizing time b )
POF instruction execution
D
RAM back-up
(Voltage drop detection
circuit is operating.)
Operation source clock: stop
Key-on wakeup
(Stabilizing time c )
POF instruction execution
Key-on wakeup
(Stabilizing time b )
POF2 instruction execution
Key-on wakeup
(Stabilizing time c )
POF2 instruction execution
E
RAM back-up
(All functions of
microcomputer stop)
Operation source clock: stop
POF instruction execution
Key-on wakeup
(Stabilizing time a )
POF2 instruction execution
Stabilizing time a : Microcomputer starts its operation after counting the ring oscillator clock 5359 times by hardware.
Stabilizing time b : Microcomputer starts its operation after counting the f(XIN) 5359 times by hardware.
Stabilizing time c : Microcomputer starts its operation after counting the f(XIN) 165 times by hardware.
Notes 1: Continuous execution of the EPOF instruction and the POF or POF2 instruction is required to go into
the RAM back-up state.
2: Through the ceramic resonator is operating, the ring oscillator clock is selected as the operation source clock.
3: The oscillator clock corresponding to each instruction is selected as the operation source clock,
and the ring oscillator is stopped.
(Stabilizing time a )
Operating
FUNCTION BLOCK OPERATIONS