參數資料
型號： M30290FATHP#U3A
元件分類： 微控制器/微處理器
英文描述： 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP80
封裝： 12 X 12 MM, 0.50 MM PITCH, ROHS COMPLIANT, PLASTIC, LQFP-80
文件頁數： 6/32頁
文件大?。?/td> 218K
代理商： M30290FATHP#U3A
M16C/29 Group
Under development Preliminary specification
Specifications in this manual are tentative and subject to change.
2. Central Processing Unit(CPU)
Rev.0.30 2004.06.15
page 14 of 30
REJ03B0072-0030Z
2.3 Frame Base Register (FB)
FB is configured with 16 bits, and is used for FB relative addressing.
2.4 Interrupt Table Register (INTB)
INTB is configured with 20 bits, indicating the start address of an interrupt vector table.
2.5 Program Counter (PC)
PC is configured with 20 bits, indicating the address of an instruction to be executed.
2.6 User Stack Pointer (USP) and Interrupt Stack Pointer (ISP)
Stack pointer (SP) comes in two types: USP and ISP, each configured with 16 bits.
Your desired type of stack pointer (USP or ISP) can be selected by the U flag of FLG.
2.7 Static Base Register (SB)
SB is configured with 16 bits, and is used for SB relative addressing.
2.8 Flag Register (FLG)
FLG consists of 11 bits, indicating the CPU status.
2.8.1 Carry Flag (C Flag)
This flag retains a carry, borrow, or shift-out bit that has occurred in the arithmetic/logic unit.
2.8.2 Debug Flag (D Flag)
The D flag is used exclusively for debugging purpose. During normal use, it must be set to “0”.
2.8.3 Zero Flag (Z Flag)
This flag is set to “1” when an arithmetic operation resulted in 0; otherwise, it is “0”.
2.8.4 Sign Flag (S Flag)
This flag is set to “1” when an arithmetic operation resulted in a negative value; otherwise, it is “0”.
2.8.5 Register Bank Select Flag (B Flag)
Register bank 0 is selected when this flag is “0” ; register bank 1 is selected when this flag is “1”.
2.8.6 Overflow Flag (O Flag)
This flag is set to “1” when the operation resulted in an overflow; otherwise, it is “0”.
2.8.7 Interrupt Enable Flag (I Flag)
This flag enables a maskable interrupt.
Maskable interrupts are disabled when the I flag is “0”, and are enabled when the I flag is “1”.
The I flag is cleared to “0” when the interrupt request is accepted.
2.8.8 Stack Pointer Select Flag (U Flag)
ISP is selected when the U flag is “0”; USP is selected when the U flag is “1”.
The U flag is cleared to “0” when a hardware interrupt request is accepted or an INT instruction for
software interrupt Nos. 0 to 31 is executed.
2.8.9 Processor Interrupt Priority Level (IPL)
IPL is configured with three bits, for specification of up to eight processor interrupt priority levels from
level 0 to level 7.
If a requested interrupt has priority greater than IPL, the interrupt is enabled.
2.8.10 Reserved Area
When write to this bit, write "0". When read, its content is indeterminate.
相關PDF資料
PDF描述
M30291F8THP 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP64
M30290FAHP 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP80
M30290MA-XXXHP 16-BIT, MROM, 20 MHz, MICROCONTROLLER, PQFP80
M30290FATHP 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP80
M30291F8HP-U9 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP64
相關代理商/技術參數
參數描述
M30290FAVHP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:RENESAS MCU M16C FAMILY / M16C/Tiny SERIES
M30290FAVHP#U3A 制造商:Renesas Electronics Corporation 功能描述:
M30290FCHP 制造商:Renesas Electronics Corporation 功能描述:16bit MCU,128+4K FL,4K RAM,LQFP80
M30290FCHP D3 制造商:Renesas Electronics Corporation 功能描述:
M30290FCHP D5 制造商:Renesas Electronics Corporation 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*