參數資料
型號： M30100M2T-XXXFP
元件分類： 微控制器/微處理器
英文描述： 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP32
封裝： PLASTIC, LQFP-32
文件頁數： 33/163頁
文件大?。?/td> 2767K
代理商： M30100M2T-XXXFP
Under
development
Tentative Specifications REV.E1
Specifications in this manual are tentative and subject to change.
Mitsubishi microcomputers
M30100/M30102 Group
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Usage precaution
128
Precautionary Notes in Using the Device
A-D Converter
(1) Only write to each bit (except bit 6) of the AD Control Register 0, or each bit of the AD Control Register 1, or
bit 0 of the AD Control Register 2 when AD conversion is stopped (before a trigger occurs).
When the Vref Connection Bit is changed from “0” to “1”, wait 1
s or longer before starting AD conversion.
(2) When changing AD operation mode, select an analog pin again.
(3) One Shot Mode
Read the AD register only after confirming AD conversion is completed, which can be determined by using
the AD conversion interrupt.
(4) Repeat Mode
Use the undivided main clock as the internal CPU clock when using this mode. The main clock can be
divided by an internal divider circuit but make sure that you use main clock when using this mode.
(5) If A-D conversion is forcibly terminated while in progress by setting the ADST bit of ADCON0 register to 0 (A-
D conversion halted), the conversion result of the A-D converter is indeterminate. If the ADST bit is cleared
to 0 in a program, ignore the value of AD register.
Stop and Wait Mode
(1) You must put at least four NOPs after a stop (All-Clock Stop Bit to "1") or a wait instruction. When switching
to a stop or wait mode, 4 instructions are prefetched after the stop or wait instruction. And so, ensure that at
least four NOPs follow the stop or wait instruction.
Serial I/O
(1) When reading data from the UARTi receive buffer in the clock asynchronous serial I/O mode, data should be
read high-byte first then low-byte using byte-size. If data is read as low-byte then high-byte or in word-size,
the framing error and parity error flags are cleared.
A code example is shown below.
MOV.B
00A7H. R0H
; Read the high-byte of UART0 receive buffer register
MOV.B
00A6H. R0L
; Read the low-byte of UART0 receive buffer register
(2) When writing data to the UARTi transmit buffer register in the clock asynchronous serial I/O mode with 9-bit
transfer data length, data should be written high-byte first then low-byte using byte-size.
A code example is shown below.
MOV.B
#XXH, 00A3H
; Write the high-byte of UART0 transmit buffer register
MOV.B
#XXH, 00A2H
; Write the low-byte of UART0 transmit buffer register
相關PDF資料
PDF描述
M30102M6T-XXXFP 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP48
M30102M3-XXXFP 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP48
M30100M2T-XXXFP 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP32
M30102M3T-XXXFP 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP48
M30100M2-XXXFP 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP32
相關代理商/技術參數
參數描述
M30100T3-RPD-E 制造商:Renesas Electronics Corporation 功能描述:DEV EMULATOR POD M16C/10 SERIES - Bulk
M30100T-PTC 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:Converter for Connecting 32-pin 0.8mm-pitch QFP for M30100T-PRB (for M16C/10 Group M30100)
M30-1010046 功能描述:集管和線殼 1.25MM FEMALE CRIMP TIN PK OF 105 RoHS:否 產品種類:1.0MM Rectangular Connectors 產品類型:Headers - Pin Strip 系列:DF50 觸點類型:Pin (Male) 節距:1 mm 位置/觸點數量:16 排數:1 安裝風格:SMD/SMT 安裝角:Right 端接類型:Solder 外殼材料:Liquid Crystal Polymer (LCP) 觸點材料:Brass 觸點電鍍:Gold 制造商:Hirose Connector
M3010102636207.32LLZZ 制造商:3M Electronic Products Division 功能描述:QUOTE # V05-0068
M30102 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*