- 您現在的位置：買賣IC網 > PDF目錄5295 > LTC6101BHS5#TRPBF (Linear Technology)IC AMP CURRENT SENSE TSOT23-5 PDF資料下載
參數資料
| 型號： | LTC6101BHS5#TRPBF |
| 廠商： | Linear Technology |
| 文件頁數： | 22/22頁 |
| 文件大小： | 0K |
| 描述： | IC AMP CURRENT SENSE TSOT23-5 |
| 標準包裝： | 2,500 |
| 放大器類型： | 電流檢測 |
| 電路數： | 1 |
| 增益帶寬積： | 200kHz |
| 電流 - 輸入偏壓： | 100nA |
| 電壓 - 輸入偏移： | 150µV |
| 電流 - 電源： | 375µA |
| 電流 - 輸出 / 通道： | 1mA |
| 電壓 - 電源，單路/雙路(±)： | 4 V ~ 60 V |
| 工作溫度： | -40°C ~ 125°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | SOT-23-5 細型，TSOT-23-5 |
| 供應商設備封裝： | TSOT-23-5 |
| 包裝： | 帶卷 (TR) |
LTC6101/LTC6101HV
9
6101fh
BLOCK DIAGRAM
OUT: Current Output. OUT will source a current that is
proportional to the sense voltage into an external resistor.
V–:
Negative Supply (or Ground for Single-Supply
Operation).
–IN: The internal sense amplier will drive IN– to the same
potential as IN+. A resistor (RIN) tied from V+ to IN– sets
the output current IOUT = VSENSE/RIN. VSENSE is the voltage
developed across the external RSENSE (Figure 1).
+IN: Must be tied to the system load end of the sense
resistor, either directly or through a resistor.
V+:
Positive Supply Pin. Supply current is drawn through
this pin. The circuit may be congured so that the
LTC6101 supply current is or is not monitored along
with the system load current. To monitor only system
load current, connect V+ to the more positive side of the
sense resistor. To monitor the total current, including the
LTC6101 current, connect V+ to the more negative side
of the sense resistor.
The LTC6101 high side current sense amplier (Figure 1)
provides accurate monitoring of current through a user-
selected sense resistor. The sense voltage is amplied by
a user-selected gain and level shifted from the positive
power supply to a ground-referred output. The output
signal is analog and may be used as is or processed with
an output lter.
Theory of Operation
An internal sense amplier loop forces IN– to have the
same potential as IN+. Connecting an external resis-
tor, RIN, between IN– and V+ forces a potential across
RIN that is the same as the sense voltage across
RSENSE. A corresponding current, VSENSE/RIN, will
ow through RIN. The high impedance inputs of the
sense amplier will not conduct this input current,
so it will ow through an internal MOSFET to the output pin.
The output current can be transformed into a voltage by
adding a resistor from OUT to V–. The output voltage is
then VO = V– + IOUT ROUT.
–
+
V+
V–
10V
OUT
6101 BD
LTC6101/LTC6101HV
VBATTERY
IOUT
VSENSE
RSENSE
ILOAD
ROUT
RIN
–
+
L
O
A
D
VOUT = VSENSE x
ROUT
RIN
5k
10V
–IN
+IN
Figure 1. LTC6101/LTC6101HV Block Diagram and Typical Connection
APPLICATIONS INFORMATION
PIN FUNCTIONS
發布緊急采購，3分鐘左右您將得到回復。