參數資料
型號: LTC2440CGN#TR
廠商: Linear Technology
文件頁數: 19/28頁
文件大?。?/td> 0K
描述: IC CONV A/D 24-BIT DIFF 16-SSOP
標準包裝: 2,500
位數: 24
采樣率(每秒): 3.5k
數據接口: MICROWIRE?,串行,SPI?
轉換器數目: 2
功率耗散(最大): 40mW
電壓電源: 單電源
工作溫度: 0°C ~ 70°C
安裝類型: 表面貼裝
封裝/外殼: 16-SSOP(0.154",3.90mm 寬)
供應商設備封裝: 16-SSOP
包裝: 帶卷 (TR)
輸入數目和類型: 1 個差分,雙極
配用: DC570A-ND - BOARD DELTA SIGMA ADC LTC2440
LTC2440
26
2440fd
Example:
If an amplier (e.g. LT1219) driving the input of an LTC2440
has wideband noise of 33nV/√Hz, band-limited to 1.8MHz,
the total noise entering the ADC input is:
33nV/√Hz √1.8MHz = 44.3μV.
When the ADC digitizes the input, its digital lter lters
out the wideband noise from the input signal. The noise
reduction depends on the oversample ratio which denes
the effective bandwidth of the digital lter.
At an oversample of 256, the noise bandwidth of the ADC
is 787Hz which reduces the total amplier noise to:
33nV/√Hz √787Hz = 0.93μV.
The total noise is the RMS sum of this noise with the 2μV
noise of the ADC at OSR=256.
√0.93μ/V2 + 2μV2 = 2.2μV.
Increasing the oversampling ratio to 32768 reduces the
noise bandwidth of the ADC to 6.2Hz which reduces the
total amplier noise to:
33nV/√Hz √6.2Hz = 82nV.
The total noise is the RMS sum of this noise with the
200nV noise of the ADC at OSR = 32768.
√82nV2 + 2μV2 = 216nV.
In this way, the digital lter with its variable oversampling
ratio can greatly reduce the effects of external noise
sources.
Using Non-Autozeroed Ampliers for Lowest Noise
Applications
Ultralow noise applications may require the use of low
noise bipolar ampliers that are not autozeroed. Because
the LTC2440 has such exceptionally low offset, offset drift
and 1/f noise, the offset drift and 1/f noise in the ampli-
ers may need to be compensated for to retain the system
performance of which the ADC is capable.
The circuit of Figure 23 uses low noise bipolar ampliers
and correlated double sampling to achieve a resolution of
14nV, or 19 effective bits over a 10mV span. Each measure-
ment is the difference between two ADC readings taken
with opposite polarity bridge excitation. This cancels 1/f
noise below 3.4Hz and eliminates errors due to parasitic
thermocouples. Allow 750μs settling time after switching
excitation polarity.
APPLICATIONS INFORMATION
相關PDF資料
PDF描述
VE-B6P-IX-B1 CONVERTER MOD DC/DC 13.8V 75W
LTC1420CGN IC ADC 12BIT 10MSPS SAMPL 28SSOP
D38999/20WG11SNLC CONN HSG RCPT 11POS WALL MT SCKT
LTC1405CGN IC ADC 12BIT 5MSPS SAMPLE 28SSOP
VE-B6P-IW-B1 CONVERTER MOD DC/DC 13.8V 100W
相關代理商/技術參數
參數描述
LTC2440IGN 功能描述:IC ADC DIFFER 24-BIT HS 16-SSOP RoHS:否 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:16 采樣率(每秒):45k 數據接口:串行 轉換器數目:2 功率耗散(最大):315mW 電壓電源:模擬和數字 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:28-SOIC(0.295",7.50mm 寬) 供應商設備封裝:28-SOIC W 包裝:帶卷 (TR) 輸入數目和類型:2 個單端,單極
LTC2440IGN#PBF 功能描述:IC ADC DIFFER 24-BIT HS 16-SSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1 系列:microPOWER™ 位數:8 采樣率(每秒):1M 數據接口:串行,SPI? 轉換器數目:1 功率耗散(最大):- 電壓電源:模擬和數字 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:24-VFQFN 裸露焊盤 供應商設備封裝:24-VQFN 裸露焊盤(4x4) 包裝:Digi-Reel® 輸入數目和類型:8 個單端,單極 產品目錄頁面:892 (CN2011-ZH PDF) 其它名稱:296-25851-6
LTC2440IGN#PBF 制造商:Linear Technology 功能描述:A/D Converter (A-D) IC 制造商:Linear Technology 功能描述:IC, ADC, 24BIT, 3.5KHZ, SSOP-16
LTC2440IGN#TR 功能描述:IC CONV A/D 24-BIT DIFF 16-SSOP RoHS:否 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:16 采樣率(每秒):45k 數據接口:串行 轉換器數目:2 功率耗散(最大):315mW 電壓電源:模擬和數字 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:28-SOIC(0.295",7.50mm 寬) 供應商設備封裝:28-SOIC W 包裝:帶卷 (TR) 輸入數目和類型:2 個單端,單極
LTC2440IGN#TRPBF 功能描述:IC ADC DIFFER 24-BIT HS 16-SSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:16 采樣率(每秒):45k 數據接口:串行 轉換器數目:2 功率耗散(最大):315mW 電壓電源:模擬和數字 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:28-SOIC(0.295",7.50mm 寬) 供應商設備封裝:28-SOIC W 包裝:帶卷 (TR) 輸入數目和類型:2 個單端,單極