參數資料
型號: LTC1604IG
廠商: Linear Technology
文件頁數: 20/20頁
文件大?。?/td> 0K
描述: IC A/D CONV 16BIT SAMPLNG 36SSOP
標準包裝: 37
位數: 16
采樣率(每秒): 333k
數據接口: 并聯
轉換器數目: 1
功率耗散(最大): 350mW
電壓電源: 雙 ±
工作溫度: -40°C ~ 85°C
安裝類型: 表面貼裝
封裝/外殼: 36-SSOP(0.209",5.30mm 寬)
供應商設備封裝: 36-SSOP
包裝: 管件
輸入數目和類型: 2 個單端,雙極;1 個差分,雙極
LTC1604
9
1604fa
APPLICATIONS INFORMATION
currents are shut down and only leakage current remains
(about 1μA). Wake-up time from Sleep mode is much
slower since the reference circuit must power up and
settle. Sleep mode wake-up time is dependent on the value
of the capacitor connected to the REFCOMP (Pin 4). The
wake-up time is 160ms with the recommended 47μF
capacitor.
Shutdown is controlled by Pin 33 (SHDN). The ADC is in
shutdown when SHDN is low. The shutdown mode is
selected with Pin 32 (CS). When SHDN is low, CS low
selects nap and CS high selects sleep.
Timing and Control
Conversion start and data read operations are controlled
by three digital inputs: CONVST, CS and RD. A falling edge
applied to the CONVST pin will start a conversion after the
ADC has been selected (i.e., CS is low). Once initiated,
it cannot be restarted until the conversion is complete.
Converter status is indicated by the BUSY output. BUSY
is low during a conversion.
We recommend using a narrow logic low or narrow logic
high CONVST pulse to start a conversion as shown in
Figures 5 and 6. A narrow low or high CONVST pulse
prevents the rising edge of the CONVST pulse from upset-
ting the critical bit decisions during the conversion time.
Figure 4 shows the change of the differential nonlinearity
error versus the low time of the CONVST pulse. As shown,
if CONVST returns high early in the conversion (e.g.,
CONVST low time <500ns), accuracy is unaffected.
Similarly, if CONVST returns high after the conversion is
over(e.g., CONVST low time >tCONV), accuracy is unaf-
fected. For best results, keep t5 less than 500ns or greater
than tCONV.
Figures 5 through 9 show several different modes of op-
eration. In modes 1a and 1b (Figures 5 and 6), CS and RD
are both tied low. The falling edge of CONVST starts the
conversion. The data outputs are always enabled and data
can be latched with the BUSY rising edge. Mode 1a shows
operation with a narrow logic low CONVST pulse. Mode 1b
shows a narrow logic high CONVST pulse.
In mode 2 (Figure 7) CS is tied low. The falling edge of
CONVST signal starts the conversion. Data outputs are
t3
SHDN
CS
1604 F02a
t4
SHDN
CONVST
1604 F02b
t2
t1
CS
CONVST
RD
1604 F03
0
CHANGE
IN
DNL
(LSB)
2800
1604 F04
400
800
1600
1200
2000
2400
4
3
2
1
0
CONVST LOW TIME, t5 (ns)
tCONV
tACQ
Figure 2a. Nap Mode to Sleep Mode Timing
Figure 2b. SHDN to CONVST Wake-Up Timing
Figure 3. CS top CONVST Setup Timing
Figure 4. Change in DNL vs CONVST Low Time. Be Sure the
CONVST Pulse Returns High Early in the Conversion or After
the End of Conversion
相關PDF資料
PDF描述
LTC1485IS8 IC TXRX DIFFERNTIAL BUS 8-SOIC
LTC1604IG#TR IC ADC 16BIT SAMPL SHTDWN 36SSOP
VI-22T-IW-F2 CONVERTER MOD DC/DC 6.5V 100W
AD9218BST-RL105 IC ADC 10BIT DUAL 105MSPS 48LQFP
MS27473P16B35P CONN PLUG 55POS STRAIGHT W/PINS
相關代理商/技術參數
參數描述
LTC1604IG#PBF 功能描述:IC A/D CONV 16BIT SAMPLNG 36SSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1 系列:- 位數:14 采樣率(每秒):83k 數據接口:串行,并聯 轉換器數目:1 功率耗散(最大):95mW 電壓電源:雙 ± 工作溫度:0°C ~ 70°C 安裝類型:通孔 封裝/外殼:28-DIP(0.600",15.24mm) 供應商設備封裝:28-PDIP 包裝:管件 輸入數目和類型:1 個單端,雙極
LTC1604IG#TR 功能描述:IC ADC 16BIT SAMPL SHTDWN 36SSOP RoHS:否 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1 系列:- 位數:14 采樣率(每秒):83k 數據接口:串行,并聯 轉換器數目:1 功率耗散(最大):95mW 電壓電源:雙 ± 工作溫度:0°C ~ 70°C 安裝類型:通孔 封裝/外殼:28-DIP(0.600",15.24mm) 供應商設備封裝:28-PDIP 包裝:管件 輸入數目和類型:1 個單端,雙極
LTC1604IG#TRPBF 功能描述:IC A/D CONV 16BIT SAMPLNG 36SSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1 系列:- 位數:14 采樣率(每秒):83k 數據接口:串行,并聯 轉換器數目:1 功率耗散(最大):95mW 電壓電源:雙 ± 工作溫度:0°C ~ 70°C 安裝類型:通孔 封裝/外殼:28-DIP(0.600",15.24mm) 供應商設備封裝:28-PDIP 包裝:管件 輸入數目和類型:1 個單端,雙極
LTC1605-1CG 功能描述:IC A/D CONV 16BIT SAMPLNG 28SSOP RoHS:否 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:12 采樣率(每秒):300k 數據接口:并聯 轉換器數目:1 功率耗散(最大):75mW 電壓電源:單電源 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:24-SOIC(0.295",7.50mm 寬) 供應商設備封裝:24-SOIC 包裝:帶卷 (TR) 輸入數目和類型:1 個單端,單極;1 個單端,雙極
LTC1605-1CG#PBF 功能描述:IC A/D CONV 16BIT SAMPLNG 28SSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1 系列:microPOWER™ 位數:8 采樣率(每秒):1M 數據接口:串行,SPI? 轉換器數目:1 功率耗散(最大):- 電壓電源:模擬和數字 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:24-VFQFN 裸露焊盤 供應商設備封裝:24-VQFN 裸露焊盤(4x4) 包裝:Digi-Reel® 輸入數目和類型:8 個單端,單極 產品目錄頁面:892 (CN2011-ZH PDF) 其它名稱:296-25851-6