APPLICATIONS INFOR
參數資料
型號: LTC1545CG#TRPBF
廠商: Linear Technology
文件頁數: 16/16頁
文件大?。?/td> 0K
描述: IC TXRX SOFTWARE SELECTBL 36SSOP
標準包裝: 2,000
類型: 收發器
驅動器/接收器數: 5/5
電源電壓: 4.75 V ~ 5.25 V
安裝類型: 表面貼裝
封裝/外殼: 36-SSOP(0.209",5.30mm 寬)
供應商設備封裝: 36-SSOP
包裝: 帶卷 (TR)
9
LTC1545
APPLICATIONS INFORMATION
WU
U
Figure 10: Single Port DCE V.35 Mode Selection in the Cable
NC
VCC
CABLE
10k
1545 F10
11
12
13
14
LTC1543
LTC1545
CONNECTOR
14
13
12
11
15
16
22
21
M2
M1
LTC1344A
LATCH
M0 (DATA)
23
24
1
(DATA)
M0
M1
M2
DCE/DTE
M2
M1
M0
D4ENB
R4EN
(DATA)
DCE/
DTE
The V.10 receiver configuration in the LTC1545 is shown
in Figure 13. In V.10 mode switch S3 inside the LTC1545
is turned off. The noninverting input is disconnected
inside the LTC1545 receiver and connected to ground.The
cable termination is then the 30k input impedance to
ground of the LTC1545 V.10 receiver.
V.11 (RS422) Interface
A typical V.11 balanced interface is shown in Figure 14. A
V.11 differential generator with outputs A and B with
ground C is connected to a differential receiver with
ground C
', inputs A' connected to A, B' connected to B. The
V.11 interface has a differential termination at the receiver
end that has a minimum value of 100
. The termination
resistor is optional in the V.11 specification, but for the
high speed clock and data lines, the termination is required
to prevent reflections from corrupting the data. The
receiver inputs must also be compliant with the imped-
ance curve shown in Figure 12.
with the termination in the cable head or separate termina-
tions are built on the board and a custom cable routes the
signals to the appropriate termination. Switching the
terminations with FETs is difficult because the FETs must
remain off even though the signal voltage is beyond the
supply voltage for the FET drivers or the power is off.
Using the LTC1344A along with the LTC1543/LTC1545
solves the cable termination switching problem. Via soft-
ware control, the LTC1344A provides termination for the
V.10 (RS423), V.11 (RS422), V.28 (RS232) and V.35
electrical protocols.
V.10 (RS423) Interface
A typical V.10 unbalanced interface is shown in Figure 11.
A V.10 single-ended generator output A with ground C is
connected to a differential receiver with inputs A
' con-
nected to A, and input C
' connected to the signal return
ground C. Usually, no cable termination is required for
V.10 interfaces, but the receiver inputs must be compliant
with the impedance curve shown in Figure 12.
相關PDF資料
PDF描述
VE-B2N-MX-B1 CONVERTER MOD DC/DC 18.5V 75W
VE-B2M-MX-B1 CONVERTER MOD DC/DC 10V 75W
MS27467T15F97PA CONN PLUG 12POS STRAIGHT W/PINS
IDT72831L25TFI IC FIFO SYNC DUAL 2048X9 64-TQFP
MS27474E22B32P CONN RCPT 32POS JAM NUT W/PINS
相關代理商/技術參數
參數描述
LTC1545IG 功能描述:IC TXRX SOFTWARE SELECTBL 36SSOP RoHS:否 類別:集成電路 (IC) >> 接口 - 驅動器,接收器,收發器 系列:- 標準包裝:250 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:3 V ~ 5.5 V 安裝類型:表面貼裝 封裝/外殼:16-TSSOP(0.173",4.40mm 寬) 供應商設備封裝:16-TSSOP 包裝:帶卷 (TR)
LTC1545IG#PBF 功能描述:IC TXRX SOFTWARE SELECTBL 36SSOP RoHS:是 類別:集成電路 (IC) >> 接口 - 驅動器,接收器,收發器 系列:- 標準包裝:250 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:3 V ~ 5.5 V 安裝類型:表面貼裝 封裝/外殼:16-TSSOP(0.173",4.40mm 寬) 供應商設備封裝:16-TSSOP 包裝:帶卷 (TR)
LTC1545IG#TR 功能描述:IC TXRX SOFTWARE SELECTBL 36SSOP RoHS:否 類別:集成電路 (IC) >> 接口 - 驅動器,接收器,收發器 系列:- 標準包裝:250 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:3 V ~ 5.5 V 安裝類型:表面貼裝 封裝/外殼:16-TSSOP(0.173",4.40mm 寬) 供應商設備封裝:16-TSSOP 包裝:帶卷 (TR)
LTC1545IG#TRPBF 功能描述:IC TXRX SOFTWARE SELECTBL 36SSOP RoHS:是 類別:集成電路 (IC) >> 接口 - 驅動器,接收器,收發器 系列:- 標準包裝:250 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:3 V ~ 5.5 V 安裝類型:表面貼裝 封裝/外殼:16-TSSOP(0.173",4.40mm 寬) 供應商設備封裝:16-TSSOP 包裝:帶卷 (TR)
LTC1546CG 功能描述:IC SW TRANSCEIVER W/TERM 28-SSOP RoHS:否 類別:集成電路 (IC) >> 接口 - 驅動器,接收器,收發器 系列:- 標準包裝:250 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:3 V ~ 5.5 V 安裝類型:表面貼裝 封裝/外殼:16-TSSOP(0.173",4.40mm 寬) 供應商設備封裝:16-TSSOP 包裝:帶卷 (TR)