The LT6600-5 requires 2 equal external resistors, R
參數資料
型號: LT6600CS8-5#PBF
廠商: Linear Technology
文件頁數: 10/12頁
文件大?。?/td> 0K
描述: IC AMP DIFF LP FLTR 5MHZ 8-SOIC
標準包裝: 100
放大器類型: 差分
電路數: 1
輸出類型: 差分
電流 - 輸入偏壓: 30µA
電壓 - 輸入偏移: 8000µV
電流 - 電源: 30mA
電壓 - 電源,單路/雙路(±): 3 V ~ 11 V,±1.5 V ~ 5.5 V
工作溫度: 0°C ~ 70°C
安裝類型: 表面貼裝
封裝/外殼: 8-SOIC(0.154",3.90mm 寬)
供應商設備封裝: 8-SO
包裝: 管件
LT6600-5
7
66005fb
APPLICATIONS INFORMATION
Interfacing to the LT6600-5
The LT6600-5 requires 2 equal external resistors, RIN, to
set the differential gain to 806Ω/RIN. The inputs to the
lter are the voltages VIN+ and VIN– presented to these
external components, Figure 1. The difference between
VIN+ and VIN– is the differential input voltage. The aver-
age of VIN+ and VIN– is the common mode input voltage.
Similarly, the voltages VOUT+ and VOUT– appearing at Pins 4
and 5 of the LT6600-5 are the lter outputs. The differ-
ence between VOUT+ and VOUT– is the differential output
voltage. The average of VOUT+ and VOUT– is the common
mode output voltage.
Figure 1 illustrates the LT6600-5 operating with a single
3.3V supply and unity passband gain; the input signal is
DC coupled. The common mode input voltage is 0.5V and
the differential input voltage is 2VP-P. The common mode
output voltage is 1.65V and the differential output voltage
is 2VP-P for frequencies below 5MHz. The common mode
output voltage is determined by the voltage at Pin 2. Since
Pin 2 is shorted to Pin 7, the output common mode is the
mid-supply voltage. In addition, the common mode input
voltage can be equal to the mid-supply voltage of Pin 7
(refer to the Distortion vs Input Common Mode Level
graphs in the Typical Performance Characteristics).
Figure 2 shows how to AC couple signals into the LT6600-5.
In this instance, the input is a single-ended signal. AC
coupling allows the processing of single-ended or dif-
ferential signals with arbitrary common mode levels. The
0.1μF coupling capacitor and the 806Ω gain setting resistor
form a high pass lter, attenuating signals below 2kHz.
Larger values of coupling capacitors will proportionally
reduce this highpass 3dB frequency.
In Figure 3 the LT6600-5 is providing 12dB of gain. The
gain resistor has an optional 62pF in parallel to improve
Figure 1
Figure 2
Figure 3
+
806Ω
0.01μF
0.1μF
3.3V
+
VIN
VIN
+
3
4
1
7
2
8
5
6
66005 F01
VOUT
+
VOUT
V
t
3
2
1
VIN
+
VIN
V
t
3
2
1
VOUT
+
LT6600-5
VOUT
0
+
806Ω
0.01μF
0.1μF
3.3V
+
VIN
+
3
4
1
7
2
8
5
6
66005 F02
VOUT
+
VOUT
V
3
2
1
V
t
1
0
–1
VIN
+
LT6600-5
VOUT
+
VOUT
+
200Ω
0.1μF
0.01μF
5V
+
VIN
VIN
+
3
4
1
7
2
8
5
6
66005 F03
VOUT
+
VOUT
62pF
+
2V
V
t
3
2
1
0
VIN
+
VIN
V
t
3
2
1
0
VOUT
+
VOUT
LT6600-5
500mVP-P (DIFF)
相關PDF資料
PDF描述
LT1793IS8#PBF IC OPAMP PREC JFET LOWNOIS 8SOIC
MCP669-E/ML IC OPAMP QUAD 6MA 60MHZ 16QFN
ADA4084-2ACPZ-RL IC OPAMP GP RRIO 10MHZ DL 8LFCSP
TMM-130-01-T-D-SM CONN HEADER 60POS DUAL 2MM SMD
40KR85 FUSE 40A 415V HOUSE SERVICE BS88
相關代理商/技術參數
參數描述
LT6600CS8-5-TR 制造商:LINER 制造商全稱:Linear Technology 功能描述:Very Low Noise, Differential Amplifi er and 5MHz Lowpass Filter
LT6600CS8-5-TRPBF 制造商:LINER 制造商全稱:Linear Technology 功能描述:Very Low Noise, Differential Amplifi er and 5MHz Lowpass Filter
LT6600IDF-10#PBF 功能描述:IC AMP DIFF LN 12-DFN RoHS:是 類別:集成電路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 標準包裝:50 系列:- 放大器類型:J-FET 電路數:2 輸出類型:- 轉換速率:3.5 V/µs 增益帶寬積:1MHz -3db帶寬:- 電流 - 輸入偏壓:30pA 電壓 - 輸入偏移:2000µV 電流 - 電源:200µA 電流 - 輸出 / 通道:- 電壓 - 電源,單路/雙路(±):7 V ~ 36 V,±3.5 V ~ 18 V 工作溫度:0°C ~ 70°C 安裝類型:通孔 封裝/外殼:8-DIP(0.300",7.62mm) 供應商設備封裝:8-PDIP 包裝:管件
LT6600IDF-10#TRPBF 功能描述:IC AMP DIFF LN 12-DFN RoHS:是 類別:集成電路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 標準包裝:73 系列:Over-The-Top® 放大器類型:通用 電路數:4 輸出類型:滿擺幅 轉換速率:0.07 V/µs 增益帶寬積:200kHz -3db帶寬:- 電流 - 輸入偏壓:1nA 電壓 - 輸入偏移:285µV 電流 - 電源:50µA 電流 - 輸出 / 通道:25mA 電壓 - 電源,單路/雙路(±):2 V ~ 44 V,±1 V ~ 22 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:16-WFDFN 裸露焊盤 供應商設備封裝:16-DFN-EP(5x3) 包裝:管件
LT6600IDF-2.5#PBF 功能描述:IC AMP DIFF LN 12-DFN RoHS:是 類別:集成電路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 標準包裝:50 系列:- 放大器類型:J-FET 電路數:2 輸出類型:- 轉換速率:3.5 V/µs 增益帶寬積:1MHz -3db帶寬:- 電流 - 輸入偏壓:30pA 電壓 - 輸入偏移:2000µV 電流 - 電源:200µA 電流 - 輸出 / 通道:- 電壓 - 電源,單路/雙路(±):7 V ~ 36 V,±3.5 V ~ 18 V 工作溫度:0°C ~ 70°C 安裝類型:通孔 封裝/外殼:8-DIP(0.300",7.62mm) 供應商設備封裝:8-PDIP 包裝:管件