參數資料
型號: LT3686EDD#PBF
廠商: LINEAR TECHNOLOGY CORP
元件分類: 穩壓器
英文描述: 2.65 A SWITCHING REGULATOR, 2500 kHz SWITCHING FREQ-MAX, PDSO10
封裝: 3 X 3 MM, LEAD FREE, PLASTIC, MO-229WEED-2, DFN-10
文件頁數: 26/28頁
文件大?。?/td> 509K
代理商: LT3686EDD#PBF
LT3686
7
3686fc
VIN (Pin 1): The VIN pin supplies current to the LT3686’s
internal regulator and to the internal power switch. This
pin must be locally bypassed.
BD (Pin 2): The BD pin is used to provide current to
the internal Boost Schottky diode. Tie this pin to output
whenever possible. When the MODE pin is greater than
0.8V, the LT3686 will prevent pulse-skipping at light
loads by regulating an active load on the BD pin; see the
Applications Information section Fixed Frequency at Light
Load.
FB (Pin 3): The LT3686 regulates its feedback pin to 0.8V.
Connect the feedback resistor divider tap to this pin. Set
the output voltage according to VOUT = 0.8(1 + R1/R2). A
good value for R2 is 10k.
SS (Pin 4): Provides Soft-Start and Tracking. An internal
2A current source tied to a 2.5V reference supplies cur-
rent to this pin to charge an external capacitor to create a
voltage ramp at the pin. Feedback voltage and switching
frequency both track SS voltage. Feedback voltage stops
tracking at 0.8V. SS is reset under all fault conditions. Float
the pin if soft-start feature is not being used.
RT (Pin 5): The RT pin is used to program the oscillator
frequency. Select the value of RT resistor according to
Table 1 in the applications section of the data sheet.
EN/UVLO (Pin 6): The EN/UVLO pin is used to start up the
LT3686.Pullthepinbelow0.4VtoshutdowntheLT3686.The
1.27V threshold can function as an accurate undervoltage
lockout (UVLO), preventing the regulator from operating
until the input voltage has reached the programmed level.
Do not drive the EN/UVLO pin above VIN.
MODE (Pin 7): The MODE pin acts as mode select for the
BD active load; when it is tied high, the LT3686 will prevent
pulse skipping at light loads by regulating an active load on
the BD pin. To disable the active load, tie MODE to GND.
BOOST (Pin 8): The BOOST pin is used to provide a drive
voltage,higherthantheinputvoltage,totheinternalbipolar
NPN power switch.
DA (Pin 9): Connect catch diode (D1) anode to this pin.
SW(Pin10):TheSWpinistheoutputoftheinternalpower
switch. Connect this pin to the inductor, catch diode and
boost capacitor.
GND (Exposed Pad Pin 11): The exposed pad GND pin is
the only ground connection for the device. The exposed
pad should be soldered to a large copper area to reduce
thermal resistance.
pin Functions
相關PDF資料
PDF描述
LT3686IDD#TRPBF 2.65 A SWITCHING REGULATOR, 2500 kHz SWITCHING FREQ-MAX, PDSO10
LT3688IFE#TRPBF SWITCHING REGULATOR, PDSO24
LT3688EUF#PBF SWITCHING REGULATOR, PQCC24
LT3688IFE#PBF SWITCHING REGULATOR, PDSO24
LT3688HFE#PBF SWITCHING REGULATOR, PDSO24
相關代理商/技術參數
參數描述
LT3686EDDTRPBF 制造商:LINER 制造商全稱:Linear Technology 功能描述:37V/1.2A Step-Down Regulator in 3mm × 3mm DFN
LT3686HDD#PBF 功能描述:IC REG BUCK ADJ 1.2A 10-DFN RoHS:是 類別:集成電路 (IC) >> PMIC - 穩壓器 - DC DC 開關穩壓器 系列:- 標準包裝:250 系列:- 類型:降壓(降壓) 輸出類型:固定 輸出數:1 輸出電壓:1.2V 輸入電壓:2.05 V ~ 6 V PWM 型:電壓模式 頻率 - 開關:2MHz 電流 - 輸出:500mA 同步整流器:是 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:6-UFDFN 包裝:帶卷 (TR) 供應商設備封裝:6-SON(1.45x1) 產品目錄頁面:1032 (CN2011-ZH PDF) 其它名稱:296-25628-2
LT3686HDD#PBF 制造商:Linear Technology 功能描述:IC PWM STEP-DOWN DC/DC CONVERTER DFN10 制造商:Linear Technology 功能描述:IC, PWM STEP-DOWN DC/DC CONVERTER, DFN10
LT3686HDD#TRPBF 功能描述:IC REG BUCK ADJ 1.2A 10DFN RoHS:是 類別:集成電路 (IC) >> PMIC - 穩壓器 - DC DC 開關穩壓器 系列:- 標準包裝:2,500 系列:- 類型:降壓(降壓) 輸出類型:固定 輸出數:1 輸出電壓:1.2V,1.5V,1.8V,2.5V 輸入電壓:2.7 V ~ 20 V PWM 型:- 頻率 - 開關:- 電流 - 輸出:50mA 同步整流器:是 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:10-TFSOP,10-MSOP(0.118",3.00mm 寬)裸露焊盤 包裝:帶卷 (TR) 供應商設備封裝:10-MSOP 裸露焊盤
LT3686IDD 制造商:LINER 制造商全稱:Linear Technology 功能描述:37V/1.2A Step-Down Regulator in 3mm × 3mm DFN