- 您現在的位置：買賣IC網 > PDF目錄44984 > LT3470AIDDB#PBF (LINEAR TECHNOLOGY CORP) 0.56 A SWITCHING REGULATOR, PDSO8 PDF資料下載
參數資料
| 型號： | LT3470AIDDB#PBF |
| 廠商： | LINEAR TECHNOLOGY CORP |
| 元件分類： | 穩壓器 |
| 英文描述： | 0.56 A SWITCHING REGULATOR, PDSO8 |
| 封裝： | 3 X 2 MM, 0.75 MM HEIGHT, LEAD FREE, PLASTIC, MO-229WECD-1, DFN-8 |
| 文件頁數： | 5/20頁 |
| 文件大?。?/td> | 197K |
| 代理商： | LT3470AIDDB#PBF |
LT3470A
13
3470afb
APPLICATIONS INFORMATION
PCB Layout
For proper operation and minimum EMI, care must be
taken during printed circuit board layout. Note that large,
switched currents flow in the power switch, the internal
catch diode and the input capacitor. The loop formed by
these components should be as small as possible. Further-
more, the system ground should be tied to the regulator
ground in only one place; this prevents the switched cur-
rent from injecting noise into the system ground. These
components, along with the inductor and output capacitor,
should be placed on the same side of the circuit board,
and their connections should be made on that layer. Place
a local, unbroken ground plane below these components,
and tie this ground plane to system ground at one location,
ideally at the ground terminal of the output capacitor C2.
Additionally, the SW and BOOST nodes should be kept as
small as possible. Unshielded inductors can induce noise
in the feedback path resulting in instability and increased
output ripple. To avoid this problem, use vias to route the
VOUT trace under the ground plane to the feedback divider
(as shown in Figure 5). Finally, keep the FB node as small
as possible so that the ground pin and ground traces will
shield it from the SW and BOOST nodes. Figure 5 shows
component placement with trace, ground plane and via
locations. Include vias near the GND pin, or pad, of the
LT3470A to help remove heat from the LT3470A to the
ground plane.
Figure 5. A Good PCB Layout Ensures Proper, Low EMI Operation
VOUT
3470a F05
SHDN
VIN
GND
相關PDF資料 |
PDF描述 |
|---|---|
| LT3470HDDB#TR | 0.2 A SWITCHING REGULATOR, PDSO8 |
| LT3485EDD-0#TRPBF | SPECIALTY ANALOG CIRCUIT, PDSO10 |
| LT3485EDD-0#TR | SPECIALTY ANALOG CIRCUIT, PDSO10 |
| LT3493EDCB-3#TR | 2.2 A SWITCHING REGULATOR, 815 kHz SWITCHING FREQ-MAX, PDSO6 |
| LT3494EDDB#PBF | 0.25 A SWITCHING REGULATOR, PDSO8 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LT3470AIDDB-TRPBF | 制造商:LINER 制造商全稱:Linear Technology 功能描述:Micropower Buck Regulator with Integrated Boost and Catch Diodes |
| LT3470EDDB | 制造商:Linear Technology 功能描述:Conv DC-DC Single Step Down 4V to 40V 8-Pin DFN EP |
| LT3470EDDB#PBF | 制造商:Linear Technology 功能描述:BUCK 40V 0.3A 8DFN 制造商:Linear Technology 功能描述:BUCK, 40V, 0.3A, 8DFN |
| LT3470EDDB#TRMPBF | 功能描述:IC REG BUCK ADJ 0.2A 8DFN RoHS:是 類別:集成電路 (IC) >> PMIC - 穩壓器 - DC DC 開關穩壓器 系列:- 標準包裝:2,500 系列:- 類型:升壓（升壓） 輸出類型:可調式 輸出數:1 輸出電壓:1.24 V ~ 30 V 輸入電壓:1.5 V ~ 12 V PWM 型:電流模式，混合 頻率 - 開關:600kHz 電流 - 輸出:500mA 同步整流器:無 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:8-SOIC（0.154"，3.90mm 寬） 包裝:帶卷 (TR) 供應商設備封裝:8-SOIC |
| LT3470EDDB#TRPBF | 功能描述:IC REG BUCK ADJ 0.2A 8DFN RoHS:是 類別:集成電路 (IC) >> PMIC - 穩壓器 - DC DC 開關穩壓器 系列:- 標準包裝:2,500 系列:- 類型:升壓（升壓） 輸出類型:可調式 輸出數:1 輸出電壓:1.24 V ~ 30 V 輸入電壓:1.5 V ~ 12 V PWM 型:電流模式，混合 頻率 - 開關:600kHz 電流 - 輸出:500mA 同步整流器:無 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:8-SOIC（0.154"，3.90mm 寬） 包裝:帶卷 (TR) 供應商設備封裝:8-SOIC |
發布緊急采購，3分鐘左右您將得到回復。