參數資料
型號: LT1739IUE
廠商: Linear Technology
文件頁數: 4/20頁
文件大小: 0K
描述: IC AMP XDSL LINE DVR DUAL 12-DFN
標準包裝: 1
類型: 線路驅動器,發射器
驅動器/接收器數: 2/0
電源電壓: 5 V ~ 12 V
安裝類型: 表面貼裝
封裝/外殼: 12-WFDFN 裸露焊盤
供應商設備封裝: 12-DFN(4x3)
包裝: 管件
12
LT1739
1739fas, sn1739
Layout and Passive Components
With a gain bandwidth product of 200MHz the LT1739
requires attention to detail in order to extract maximum
performance. Use a ground plane, short lead lengths and
a combination of RF-quality supply bypass capacitors (i.e.,
0.1
F). As the primary applications have high drive cur-
rent, use low ESR supply bypass capacitors (1
F to 10F).
The parallel combination of the feedback resistor and gain
setting resistor on the inverting input can combine with the
input capacitance to form a pole that can cause frequency
peaking. In general, use feedback resistors of 1k or less.
Compensation
The LT1739 is stable in a gain 10 or higher for any supply
and resistive load. It is easily compensated for lower gains
with a single resistor or a resistor plus a capacitor.
Figure 9 shows that for inverting gains, a resistor from the
inverting node to AC ground guarantees stability if the
parallel combination of RC and RG is less than or equal to
RF/9. For lowest distortion and DC output offset, a series
capacitor, CC, can be used to reduce the noise gain at
lower frequencies. The break frequency produced by RC
and CC should be less than 5MHz to minimize peaking.
Figure 10 shows compensation in the noninverting con-
figuration. The RC, CC network acts similarly to the invert-
ing case. The input impedance is not reduced because the
network is bootstrapped. This network can also be placed
between the inverting input and an AC ground.
Another compensation scheme for noninverting circuits is
shown in Figure 11. The circuit is unity gain at low
frequency and a gain of 1 + RF/RG at high frequency. The
DC output offset is reduced by a factor of ten. The
techniques of Figures 10 and 11 can be combined as
shown in Figure 12. The gain is unity at low frequencies,
1 + RF/RG at mid-band and for stability, a gain of 10 or
greater at high frequencies.
Figure 9. Compensation for Inverting Gains
APPLICATIO S I FOR ATIO
WU
UU
RG
RC
VO
VI
CC
(OPTIONAL)
+
1739 F09
RF
=
–RF
RG
VO
VI
< 5MHz
1
2
πRCCC
(RC || RG) ≤ RF/9
RC
VO
VI
CC
(OPTIONAL)
+
1739 F10
RF
RG
= 1 +
RF
RG
VO
VI
< 5MHz
1
2
πRCCC
(RC || RG) ≤ RF/9
Figure 10. Compensation for Noninverting Gains
+
1739 F11
RF
RG
Vi
VO
CC
< 5MHz
1
2
πRGCC
RG ≤ RF/9
= 1 (LOW FREQUENCIES)
(HIGH FREQUENCIES)
VO
VI
= 1 +
RF
RG
Figure 11. Alternate Noninverting Compensation
RC
VO
VI
CC
+
1739 F12
RF
RG
CBIG
RF
RG
= 1 AT LOW FREQUENCIES
= 1 +
AT MEDIUM FREQUENCIES
RF
(RC || RG)
= 1 +
AT HIGH FREQUENCIES
VO
VI
Figure 12. Combination Compensation
相關PDF資料
PDF描述
MS3102E12S-2P CONN RCPT 2POS BOX MNT W/PINS
205841-1 CONN RECEPT CPC 8POS STD SER 2
VI-B5M-MX-F2 CONVERTER MOD DC/DC 10V 75W
PX0707/S/12 CONN RCPT 12POS W/SOCKET PCB
VI-B5M-MW CONVERTER MOD DC/DC 10V 100W
相關代理商/技術參數
參數描述
LT1739IUE#TR 功能描述:IC AMP XDSL LINE DVR DUAL 12-DFN RoHS:否 類別:集成電路 (IC) >> 接口 - 驅動器,接收器,收發器 系列:- 標準包裝:27 系列:- 類型:收發器 驅動器/接收器數:3/3 規程:RS232,RS485 電源電壓:4.75 V ~ 5.25 V 安裝類型:表面貼裝 封裝/外殼:28-SOIC(0.295",7.50mm 寬) 供應商設備封裝:28-SOIC 包裝:管件
LT1739IUE#TRPBF 功能描述:IC AMP XDSL LINE DVR DUAL 12-DFN RoHS:是 類別:集成電路 (IC) >> 接口 - 驅動器,接收器,收發器 系列:- 標準包裝:27 系列:- 類型:收發器 驅動器/接收器數:3/3 規程:RS232,RS485 電源電壓:4.75 V ~ 5.25 V 安裝類型:表面貼裝 封裝/外殼:28-SOIC(0.295",7.50mm 寬) 供應商設備封裝:28-SOIC 包裝:管件
LT1740-7 制造商:Power-One 功能描述:ACDC - Bulk
LT1740-7DZ 制造商:Power-One 功能描述:ACDC - Bulk
LT1740-7Z 功能描述:AC-DC BATTERY CHARGER 54.5V 10A RoHS:否 類別:電源 - 外部/內部(非板載) >> AC DC 轉換器 系列:* 產品培訓模塊:MP Modular-Configurable AC-DC Power Supply 特色產品:Configurable Power Supplies 標準包裝:1 系列:MP