- 您現在的位置：買賣IC網 > PDF目錄3541 > LT1010CT (Linear Technology)IC BUFFER HI-SPEED 150MA TO220-5 PDF資料下載
參數資料
| 型號： | LT1010CT |
| 廠商： | Linear Technology |
| 文件頁數： | 2/20頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC BUFFER HI-SPEED 150MA TO220-5 |
| 標準包裝： | 50 |
| 放大器類型： | 緩沖器 |
| 電路數： | 1 |
| 轉換速率： | 75 V/µs |
| 增益帶寬積： | 20MHz |
| 電流 - 輸入偏壓： | 500µA |
| 電流 - 電源： | 5mA |
| 電流 - 輸出 / 通道： | 150mA |
| 電壓 - 電源，單路/雙路(±)： | 4.5 V ~ 40 V，±2.25 V ~ 20 V |
| 工作溫度： | 0°C ~ 100°C |
| 安裝類型： | 通孔 |
| 封裝/外殼： | TO-220-5 成形引線 |
| 供應商設備封裝： | TO-220-5 |
| 包裝： | 管件 |
LT1010
10
1010fe
APPLICATIONS INFORMATION
This is a good example of how fast op amps can be made
quite easy to use by employing an output buffer.
Integrator
A lowpass amplifier can be formed just by using large CF
in the inverter described earlier, as long as the increasing
closed-loop output impedance above the cutoff frequency
is not a problem and the op amp is capable of supplying
the required current at the summing junction.
stage. Feedback is arranged in the conventional manner,
although the 68F-0.01F combination limits DC gain to
unity for all gain settings. For applications sensitive to
NTSC requirements, dropping the 25Ω output stage bias
value will aid performance.
A2
LT1010
R
20k
CF
500pF
CI
IIN
1010 AI07
VOUT
–
+
A1
LT1012
If the integrating capacitor must be driven from the buffer
output, the circuit above can be used to provide capacitive
load isolation. As before, the stability with large capacitive
loads is determined by RFCF.
Wideband Amplifiers
This simple circuit provides an adjustable gain video
amplifier that will drive 1VP-P into 75Ω. The differential
pair provides gain with the LT1010 serving as an output
BIAS
+
LT1010
22F
+
22F
TYPICAL SPECIFICATIONS
1VP-P INTO 75
AT A = 2
0.5dB TO 10MHz
3dB DOWN AT 16MHz
AT A = 10
0.5dB TO 4MHz
–3dB = 8MHz
+
68F
1010 AI08
PEAKING
5pF to 25pF
25
900
OUTPUT
(75)
0.01F
1k
GAIN SET
5.1k
Q1, Q2: 2N3866
–15V
8.2k
15V
–15V
Q2
Q1
INPUT
A2
LT1010
R1
100
R2
800
C1
15pF
VIN
1010 AI09
VOUT
–
+
A1
HA2625
This shows the buffer being used with a wideband ampli-
fier that is not unity-gain stable. In this case, C1 cannot
be used to isolate large capacitive loads. Instead, it has an
optimum value for a limited range of load capacitances.
The buffer can cause stability problems in circuits like this.
With the TO-220 packages, behavior can be improved by
raising the quiescent current with a 20Ω resistor from the
bias terminal to V+. Alternately, devices in the miniDIP can
be operated in parallel.
It is possible to improve capacitive load stability by oper-
ating the buffer class A at high frequencies. This is done
by using quiescent current boost and bypassing the bias
terminal to V– with more than 0.02F.
A2
LT1010
R1
400
R2
1.6k
INPUT
1010 AI10
OUTPUT
–
+
A1
HA2625
Putting the buffer outside the feedback loop as shown
here will give capacitive load isolation, with large output
capacitorsonlyreducingbandwidth.Bufferoffset,referred
to the op amp input, is divided by the gain. If the load re-
sistance is known, gain error is determined by the output
resistance tolerance. Distortion is low.
相關PDF資料 |
PDF描述 |
|---|---|
| 63664-1 | CONN MAG-MATE 23-27AWG .187 |
| 7-146253-0 | 40 MODII HDR DRST B/A .100CL LF |
| LTC1049CS8#TR | IC OPAMP CHOP STABLE CAPS 8SOIC |
| NCS2002SN1T1G | IC OPAMP ENABLE R/R 1V 6TSOP |
| 4-1601041-1 | TERM SIAMEZE .040X.020X.155 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LT1010CT#06 | 制造商:Linear Technology 功能描述:Fast +/ 150 mA power buffer |
| LT1010CT#06PBF | 功能描述:IC BUFFER HI-SPEED 150MA TO220-5 RoHS:是 類別:集成電路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- 放大器類型:電流檢測 電路數:1 輸出類型:- 轉換速率:- 增益帶寬積:125kHz -3db帶寬:- 電流 - 輸入偏壓:- 電壓 - 輸入偏移:100µV 電流 - 電源:1.1µA 電流 - 輸出 / 通道:- 電壓 - 電源，單路/雙路(±):- 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:4-WFBGA，CSPBGA 供應商設備封裝:4-UCSP（2x2） 包裝:剪切帶 (CT) 其它名稱:MAX9634WERS+TCT |
| LT1010CT#31 | 功能描述:IC BUFFER HI-SPEED 150MA TO220-5 RoHS:否 類別:集成電路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 標準包裝:1 系列:- 放大器類型:通用 電路數:4 輸出類型:滿擺幅 轉換速率:0.028 V/µs 增益帶寬積:105kHz -3db帶寬:- 電流 - 輸入偏壓:3nA 電壓 - 輸入偏移:100µV 電流 - 電源:3.3µA 電流 - 輸出 / 通道:12mA 電壓 - 電源，單路/雙路(±):2.7 V ~ 12 V，±1.35 V ~ 6 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:14-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:14-TSSOP 包裝:剪切帶 (CT) 其它名稱:OP481GRUZ-REELCT |
| LT1010CT#31PBF | 制造商:Linear Technology 功能描述:LEAD FREE HIGH SPEED BUFFER |
| LT1010CT#PBF | 功能描述:IC BUFFER HI-SPEED 150MA TO220-5 RoHS:否 類別:集成電路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 標準包裝:2,500 系列:- 放大器類型:通用 電路數:4 輸出類型:- 轉換速率:0.6 V/µs 增益帶寬積:1MHz -3db帶寬:- 電流 - 輸入偏壓:45nA 電壓 - 輸入偏移:2000µV 電流 - 電源:1.4mA 電流 - 輸出 / 通道:40mA 電壓 - 電源，單路/雙路(±):3 V ~ 32 V，±1.5 V ~ 16 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:14-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:14-TSSOP 包裝:帶卷 (TR) 其它名稱:LM324ADTBR2G-NDLM324ADTBR2GOSTR |
發布緊急采購，3分鐘左右您將得到回復。