![](http://datasheet.mmic.net.cn/70000/LSN2-T-22-D12_datasheet_2356928/LSN2-T-22-D12_1.png)
LSN2-T/22-D12
Non-isolated, DOSA-SIP,
22A Selectable-Output DC/DC Converters
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com
Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000
MDC_LSN2-T/22-D12_B02 Page 1 of 13
ORDERING GUIDE SUMMARY
Model
VOUT Range
IOUT Range
VIN Range
Ripple/Noise
Efficiency
LSN2-T/22-D12
0.8-5V
0-22A
8.3-14V
35mVpk-pk
95%
MECHANICAL CHARACTERISTICS
22 Amp model
0.50 x 2.00 x 0.38 inches (12.7 x 50.8 x 9.653 mm)
INPUT CHARACTERISTICS
Parameter
Typ. @ 25°C, full load
Notes
Voltage Range
8.3-14V
12V nominal
Current, full power
8.77A
Undervoltage Shutdown
Included
With autorestart hysteresis
Short Circuit Current
60mA
Output is short circuited
Remote On/Off Control
Positive or negative polarity
Default polarity is positive
OUTPUT CHARACTERISTICS
Parameter
Typ. @ 25°C, full load
Notes
Voltage
0.8-5V
User adjustable
Current
0-22A
Power Output
112W max.
Accuracy
±2% of VNOM
50% load
Ripple & Noise
35mVpp
Line and Load Regulation (max.)
±0.1% / ±0.3%
Overcurrent Protection
Hiccup autorecovery
Continuous short circuit protection
Overtemperature Protection
+115°C shutdown
Efficiency (minimum)
94%
Efficiency (typical)
95%
GENERAL SPECIFICATIONS
Parameter
Typ. @ 25°C, full load
Notes
Transient Response
40μsec
50% load step to 2% of final value
Operating Temperature Range
–40 to +60°C
With 200 lfm airflow
Safety
UL/IEC/EN 60950
And CSA C22.2-No.60950
EMI, Conducted/Radiated
FCC pt.15, class B
May require external filter
Pb
Lead-free
construction/attach
FEATURES
n
User-selectable outputs: 0.8-5V
n
22 Amps maximum output current
n
Double lead free to RoHS standards
n
Selectable phased start-up sequencing
and tracking
n
Wide range VIN 8.3-14V
n
Up to 112 Watts total output power
n
Very high efficiency up to 94%
n
Starts up into pre-biased load
n
Fast settling, high di/dt IOUT slew rate
DESCRIPTION
These miniature point-of-load (POL) switching
DC/DC converters are ideal regulation and supply
elements for distributed power and intermediate
bus architectures. Fully compatible with the Dis-
tributed-power Open Standards Alliance specifi-
cation (www.dosapower.com), LSN2’s can power
CPU’s, programmable logic and mixed-voltage
systems with little heat and low noise. A typical
application uses a master isolated 12Vdc supply
and individual LSN2 converters for local 1.8 and
3.3Vdc supplies. All system isolation resides in
the central supply, leaving lower cost POL regula-
tion at the load. The LSN2’s can deliver very high
power (to 112 Watts) in a tiny area without heat
sinking or external components. They feature
quick transient response (to 25sec) and very fast
current slew rates (to 20A/sec).