For more information please visit
the
LSI Logic web sites at:
http://storageio.lsilogic.com
http://adapters.lsilogic.com
LSI Logic Corporation
North American Headquarters
Milpitas, CA
Tel: 866 574 5741 (within U.S)
408 954 3108 (outside U.S.)
Host Adapter Group
Southborough, MA
Tel: 888 429 0425
FAX: 508 485 0303
LSI Logic Europe Ltd.
European Headquarters
United Kingdom
Tel: 44 1344 426544
Fax: 44 1344 481039
LSI Logic KK Headquarters
Tokyo, Japan
Tel: 81 3 5463 7165
Fax 81 3 5463 7820
ISO 9001 Certified
The LSI Logic logo design and LVDlink are trademarks
or registered trademarks of LSI Logic Corporation.
All other brand and product names may be trademarks
of their respective companies.
LSI Logic Corporation reserves the right to make
changes to any products and services herein at
any time without notice. LSI Logic does not
assume any responsibility or liability arising out of
the application or use of any product or service
described herein, except as expressly agreed to
in writing by LSI Logic; nor does the purchase,
lease, or use of a product or service from
LSI Logic convey a license under any patent
rights, copyrights, trademark rights, or any other
of the intellectual property rights of LSI Logic or
of third parties.
Copyright 2002 by LSI Logic Corporation.
All rights reserved.
Order No. S20115
7/02-1M – Printed in USA
2
LSIU80LVD Ultra2 LVD SCSI Host Adapter
Technical Specifications
PCI Bus
PCl Modes
PCI Data Burst
Transfer Rate
PCI Card Type
PCI Voltage
PCI Form Factor
PCI Power
Certification Level
SCSI Bus
32-bit, 33 MHz max
Bus master DMA
132 MB/second (PCI 32-bit bus @ 33 MHz)
Universal add-in card (3.3V and 5.0V signaling)
+5V ±5%
3.5” x 6.0”
7.5 Watts, 1.5A @ +5VDC
PCI 2.1
Wide Ultra2, LVD (Low Voltage Differential) and Ultra Wide
SE (Single-Ended)
LSI53C895
External
68-pin HD
Universal (LVD/SE) termination
Automatic cable detection
4-pin header for off-board LEDs
128K x 8 flash EEPROM
Operating
0°C to 55°C
5 to 90% non-condensing
>500,000 hours
CE, VCCI, Canada, C-Tick, FCC class B, UL 94VO
SCSI Processor
Connectors
Internal
68-pin HD
Termination
LED Indicators
BIOS Flash Memory
Environments
Temperature
Relative Humidity
MTBP
Compliances
Storage
-40°C to +105°C
5 to 90% non-condensing
Software Support
OS Support
Windows
Linux
Utilities
Device Support
Versions
95, 98, Me, NT4.0, SP4 and above, 2000, and XP
2.2 and 2.4 kernels
Install, FIash, SCSI format, BIOS configuration, and NT configuration
OBDR (tape booting) and bootable CD-ROM
INSTALLATION INSTRUCTION FOR WINDOWS NT4.0 AND 2000
Windows 2000, XP and .NET have the driver included on the Windows CD
1.Create Windows driver disk for the LSI Logic SCSI card (download from web site)
http://adapters.lsilogic.com
2. Boot with Windows CD
3.Press F6 key when the screen displays “Setup is inspecting your computer’s
hardware configuration”
4.Choose “S” to specify an additional device when the screen displays “Setup has
recognized the following mass storage devices in your computer...”
a) Install the driver disk made in step 1 in the floppy drive and follow instructions
5. Continue with the Windows install
6. Install the latest service pack