- 您現在的位置：買賣IC網 > PDF目錄239826 > LP0603A0947ANTR (AVX CORP) FILTER LOW-PASS 947MHZ SMD-0603 SN/PB TR-7-PL PDF資料下載
參數資料
| 型號： | LP0603A0947ANTR |
| 廠商： | AVX CORP |
| 英文描述： | FILTER LOW-PASS 947MHZ SMD-0603 SN/PB TR-7-PL |
| 中文描述： | 947.5 MHz, LOW PASS FILTER |
| 封裝： | ROHS COMPLIANT, MINIATURE, EIA STD PACKAGE SIZE 0603, LGA-4 |
| 文件頁數： | 5/5頁 |
| 文件大?。?/td> | 124K |
| 代理商： | LP0603A0947ANTR |
85
4
GENERAL DESCRIPTION
These jigs are designed for testing the LP0603 LGA Low
Pass Filters using a Vector Network Analyzer.
They consist of a dielectric substrate, having 50
Ω microstrips
as conducting lines and a bottom ground plane located at a
distance of 0.127mm from the microstrips.
The substrate used is Neltec’s NH9338ST0127C1BC (or
similar).
The
connectors
are
SMA
type
(female),
‘Johnson
Components Inc.’ Product P/N: 142-0701-841 (or similar).
Both a measurement jig and a calibration jig are provided.
The calibration jig is designed for a full 2-port calibration, and
consists of an open line, short line and through line. LOAD
calibration can be done by a 50
Ω SMA termination.
MEASUREMENT PROCEDURE
Follow the VNA’s instruction manual and use the calibration
jig to perform a full 2-Port calibration in the required band-
widths.
Solder the filter to the measurement jig as follows:
Input
Connector 1 (Jig)
GND (Filter)
GND (Jig)
(Filter)
Output Connector 2 (Jig)
GND (Filter)
GND (Jig)
(Filter)
Set the VNA to the relevant frequency band. Connect the
VNA using a 10dB attenuator on the jig terminal connected
to port 2 (using an RF cable).
TEST JIG FOR LP0603 LEAD-FREE LGA LOW PASS FILTER
Thin-Film Low Pass Filter
LP0603 Lead-Free LGA Type Test Jig
Connector 1
Connector 2
Load &
Through
Short line to
GND
Connector
Johnson
P/N 152-0701-841
Open
line
Load &
OUT
Measurement
Calibration Jig
相關PDF資料 |
PDF描述 |
|---|---|
| LP0603A1747ANTR | FILTER LOW PASS 1747MHZ 0603 SMD |
| LP0603A1842ANTR | FILTER LOW PASS 1842MHZ 0603 SMD |
| LP0603A1880ANTR | FILTER LOW PASS 1880MHZ 0603 SMD |
| LP0603A2140ANTR | FILTER LOW PASS 2140MHZ 0603 SMD |
| LP0603A2442ANTR | FILTER LOW PASS 2442MHZ 0603 SMD |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LP0603A0947ANTR/500 | 制造商:AVX Corporation 功能描述:FILTER LOW PASS 947MHZ 0603 制造商:AVX Corporation 功能描述:FILTER, LOW PASS, 947MHZ, 0603 |
| LP0603A0947ANTR\500 | 功能描述:信號調節 947MHz 0603 SIZE RoHS:否 制造商:EPCOS 產品:Duplexers 頻率:782 MHz, 751 MHz 頻率范圍: 電壓額定值: 帶寬: 阻抗:50 Ohms 端接類型:SMD/SMT 封裝 / 箱體:2.5 mm x 2 mm 工作溫度范圍:- 30 C to + 85 C 封裝:Reel |
| LP0603A0950ANTR | 功能描述:信號調節 950MHz 0603 SIZE RoHS:否 制造商:EPCOS 產品:Duplexers 頻率:782 MHz, 751 MHz 頻率范圍: 電壓額定值: 帶寬: 阻抗:50 Ohms 端接類型:SMD/SMT 封裝 / 箱體:2.5 mm x 2 mm 工作溫度范圍:- 30 C to + 85 C 封裝:Reel |
| LP0603A1000ANTR | 功能描述:信號調節 1000MHz 0603 SIZE RoHS:否 制造商:EPCOS 產品:Duplexers 頻率:782 MHz, 751 MHz 頻率范圍: 電壓額定值: 帶寬: 阻抗:50 Ohms 端接類型:SMD/SMT 封裝 / 箱體:2.5 mm x 2 mm 工作溫度范圍:- 30 C to + 85 C 封裝:Reel |
| LP0603A1747ALTR | 功能描述:信號調節 1747MHz 0603 SIZE RoHS:否 制造商:EPCOS 產品:Duplexers 頻率:782 MHz, 751 MHz 頻率范圍: 電壓額定值: 帶寬: 阻抗:50 Ohms 端接類型:SMD/SMT 封裝 / 箱體:2.5 mm x 2 mm 工作溫度范圍:- 30 C to + 85 C 封裝:Reel |
發布緊急采購，3分鐘左右您將得到回復。