- 您現在的位置：買賣IC網 > PDF目錄358828 > LM2715MTX-ADJ (NATIONAL SEMICONDUCTOR CORP) TFT Panel Module PDF資料下載
參數資料
| 型號： | LM2715MTX-ADJ |
| 廠商： | NATIONAL SEMICONDUCTOR CORP |
| 元件分類： | 顯示驅動器 |
| 英文描述： | TFT Panel Module |
| 中文描述： | LIQUID CRYSTAL DISPLAY DRIVER, PDSO16 |
| 封裝： | TSSOP-16 |
| 文件頁數： | 3/20頁 |
| 文件大小： | 746K |
| 代理商： | LM2715MTX-ADJ |
Pin Functions
Vcom+(Pin 1):
Positive input terminal of Vcom amplifier.
Vcom(Pin 2):
Negative input terminal of Vcom amplifier.
Vcom(Pin 3)
: Output terminal of Vcom amplifier.
AGND(Pin 4):
Analog ground connection for LM2715. Con-
nect all sensitive circuitry, ie. feedback resistors, delay ca-
pacitor, and compensation network to its own dedicated
AGND plane which connects directly to this pin.
Delay(Pin 5):
PMOS switch delay control pin. See
Operation
section for setting the delay time.
The delay time begins when the output voltage of the DC/DC
switching regulator reaches 85% of its true output voltage.
This corresponds to a FB voltage of about 1.1V. The PMOS
switch is controlled with both the delay time and the switch
control pin, SWC. If no Cdelay capacitor is used, the PMOS
switch is controlled solely with the SWC pin.
V
(Pin 6):
Compensation Network for Boost switching regu-
lator. Connect resistor/capacitor network between V
pin
and AGND for boost switching regulator AC compensation.
FB(Pin 7):
Feedback pin. Set the output voltage by selecting
values of R1 and R2 using:
Connect the ground of the feedback network to the AGND
plane, which should be tied directly to the PGND pin.
Ordering Information
PGND(Pin 8):
Connect all power ground components to a
PGND plane which should also connect directly to this pin.
Use a trace or via to connect the AGND plane to the PGND
plane. Please see Layout Considerations under the Opera-
tion section for more details on layout suggestions.
SW(Pin 9):
This is the drain of the internal NMOS power
switch. Minimize the metal trace area connected to this pin to
minimize EMI.
V
IN
(Pin 10):
Input Supply Pin. Bypass this pin with a capaci-
tor as close to the device as possible. The capacitor should
connect between V
IN
and PGND.
SWI(Pin 11):
PMOS switch input. Source connection of
PMOS device.
SWO(Pin 12):
PMOS switch output. Drain connection of
PMOS device.
SWC(Pin13):
PMOS switch control pin. This pin creates an
AND function with the delay time after the output of the
switching regulator has reached 85% of its nominal value. To
ensure the PMOS switch is in the correct state, apply a
voltage above 1.5V to this pin to turn on the PMOS switch
and apply a voltage below 0.7V to turn off the PMOS switch.
AV
(Pin 14):
Supply pin for the Vcom opamp and the
Gamma buffer. Bypass this pin with a capacitor as close to
the device as possible, about 100nF, if connected directly to
the output of the boost DC/DC switching regulator. The
capacitor should connect between AV
IN
and PGND.
GMA(Pin 15):
Gamma Buffer output pin.
GMA+(Pin 16):
Gamma Buffer input pin.
Order Number
LM2715MT-ADJ
LM2715MTX-ADJ
Package Type
TSSOP-16
TSSOP-16
NSC Package Drawing
MTC16
MTC16
Supplied As
73 Units, Rail
2500 Units, Tape and Reel
L
www.national.com
3
相關PDF資料 |
PDF描述 |
|---|---|
| LM2715 | TFT Panel Module |
| LM2716MTX-ADJ | Dual (Step-up and Step-down) PWM DC/DC Converter |
| LM2716MT-ADJ | Dual (Step-up and Step-down) PWM DC/DC Converter |
| LM2716 | Dual (Step-up and Step-down) PWM DC/DC Converter |
| LM2717 | Dual Step-down DC/DC Converter |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LM2715MTX-ADJ/NOPB | 功能描述:IC MODULE PANEL TFT DISP 16TSSOP RoHS:是 類別:集成電路 (IC) >> PMIC - 電源管理 - 專用 系列:- 應用說明:Ultrasound Imaging Systems Application Note 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:37 系列:- 應用:醫療用超聲波成像，聲納 電流 - 電源:- 電源電壓:2.37 V ~ 6 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:56-WFQFN 裸露焊盤 供應商設備封裝:56-TQFN-EP（8x8） 包裝:管件 |
| LM2715SQ-ADJ | 制造商:NSC 制造商全稱:National Semiconductor 功能描述:TFT Panel Module |
| LM2715SQ-ADJ/NOPB | 功能描述:IC TFT PANEL MODULE 24-LLP RoHS:是 類別:集成電路 (IC) >> PMIC - 電源管理 - 專用 系列:- 應用說明:Ultrasound Imaging Systems Application Note 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:37 系列:- 應用:醫療用超聲波成像，聲納 電流 - 電源:- 電源電壓:2.37 V ~ 6 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:56-WFQFN 裸露焊盤 供應商設備封裝:56-TQFN-EP（8x8） 包裝:管件 |
| LM2715SQX-ADJ | 制造商:NSC 制造商全稱:National Semiconductor 功能描述:TFT Panel Module |
| LM2715SQX-ADJ/NOPB | 功能描述:IC TFT PANEL MODULE 24-LLP RoHS:是 類別:集成電路 (IC) >> PMIC - 電源管理 - 專用 系列:- 應用說明:Ultrasound Imaging Systems Application Note 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:37 系列:- 應用:醫療用超聲波成像，聲納 電流 - 電源:- 電源電壓:2.37 V ~ 6 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:56-WFQFN 裸露焊盤 供應商設備封裝:56-TQFN-EP（8x8） 包裝:管件 |
發布緊急采購，3分鐘左右您將得到回復。