參數資料
型號： LM2575-5.0MWC
廠商： NATIONAL SEMICONDUCTOR CORP
元件分類： 穩壓器
英文描述： 3.2 A SWITCHING REGULATOR, 63 kHz SWITCHING FREQ-MAX, UUC
封裝： WAFER
文件頁數： 6/40頁
文件大?。?/td> 917K
代理商： LM2575-5.0MWC
INDUCTOR VALUE SELECTION GUIDES (For Continuous Mode Operation) (Continued)
PROCEDURE (Adjustable Output Voltage Versions)
EXAMPLE (Adjustable Output Voltage Versions)
3. Output Capacitor Selection (C
OUT)
A. The value of the output capacitor together with the inductor
defines the dominate pole-pair of the switching regulator loop.
For stable operation, the capacitor must satisfy the following
requirement:
The above formula yields capacitor values between 10 F and
2000 F that will satisfy the loop requirements for stable
operation. But to achieve an acceptable output ripple voltage,
(approximately 1% of the output voltage) and transient re-
sponse, the output capacitor may need to be several times
larger than the above formula yields.
B. The capacitor’s voltage rating should be at last 1.5 times
greater than the output voltage. For a 10V regulator, a rating
of at least 15V or more is recommended.
Higher voltage electrolytic capacitors generally have lower
ESR numbers, and for this reasion it may be necessary to
select a capacitor rate for a higher voltage than would nor-
mally be needed.
3. Output Capacitor Selection (C
OUT)
A.
However, for acceptable output ripple voltage select
C
OUT ≥ 220 F
C
OUT = 220 F electrolytic capacitor
4. Catch Diode Selection (D1)
A. The catch-diode current rating must be at least 1.2 times
greater than the maximum load current. Also, if the power
supply design must withstand a continuous output short, the
diode should have a current rating equal to the maximum
current limit of the LM2575. The most stressful condition for
this diode is an overload or shorted output. See diode selec-
tion guide in
B. The reverse voltage rating of the diode should be at least
1.25 times the maximum input voltage.
4. Catch Diode Selection (D1)
A. For this example, a 3A current rating is adequate.
B. Use a 40V MBR340 or 31DQ04 Schottky diode, or any of
the suggested fast-recovery diodes in
5. Input Capacitor (C
IN)
An aluminum or tantalum electrolytic bypass capacitor located
close to the regulator is needed for stable operation.
5. Input Capacitor (C
IN)
A 100 F aluminum electrolytic capacitor located near the
input and ground pins provides sufficient bypassing.
To further simplify the buck regulator design procedure, National Semiconductor is making available computer design software to
be used with the Simple Switcher line of switching regulators. Switchers Made Simple (version 3.3) is available on a (312")
diskette for IBM compatible computers from a National Semiconductor sales office in your area.
LM1575/LM2575/LM2575HV
www.national.com
14
相關PDF資料
PDF描述
LM2575HV3.3MDC 3.2 A SWITCHING REGULATOR, 63 kHz SWITCHING FREQ-MAX, UUC
LM1575-5.0MW8 3.2 A SWITCHING REGULATOR, 62 kHz SWITCHING FREQ-MAX, UUC
LM1575WG5.0-MPR 3.2 A SWITCHING REGULATOR, 62 kHz SWITCHING FREQ-MAX, CDSO16
LM2575MX-15/NOPB 3.2 A SWITCHING REGULATOR, 63 kHz SWITCHING FREQ-MAX, PDSO24
LM2575BUT&R 3.2 A SWITCHING REGULATOR, 63 kHz SWITCHING FREQ-MAX, PSSO5
相關代理商/技術參數
參數描述
LM2575-5D2T 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Easy Switcher 1.0 A Step-Down Voltage Regulator(389.50 k)
LM2575-5T 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Easy Switcher 1.0 A Step-Down Voltage Regulator(389.50 k)
LM2575-5TV 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Easy Switcher 1.0 A Step-Down Voltage Regulator(389.50 k)
LM2575-ADJ 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:EASY SWITCHERE⑩ 1.0 A STEP-DOWN VOLTAGE REGULATOR
LM2575-ADJ/NOPB 制造商:Texas Instruments 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*