• <pre id="fwflk"><small id="fwflk"><nobr id="fwflk"></nobr></small></pre>
    <thead id="fwflk"><ul id="fwflk"></ul></thead>
    <big id="fwflk"><strike id="fwflk"><rt id="fwflk"></rt></strike></big>
      參數(shù)資料
      型號: LK1001-7RD3B2
      元件分類: 電源模塊
      英文描述: 1-OUTPUT 150 W AC-DC REG PWR SUPPLY MODULE
      封裝: METAL, CASE K02, MODULE
      文件頁數(shù): 11/26頁
      文件大小: 601K
      代理商: LK1001-7RD3B2
      Cassette Style
      150 Watt AC-DC Converters
      K Series
      Edition 01/01.2001
      19/26
      Leakage Currents in AC-DC operation
      Leakage currents flow due to internal leakage capacitance
      and RFI suppression Y-capacitors. The current values are
      proportional to the mains voltage and nearly proportional to
      the mains frequency and are specified at an input voltage of
      264 V (50 Hz) where phase, neutral and protective earth
      are correctly connected as required for class I equipment.
      Under test conditions the leakage current flows through a
      measuring instrument (MI) as described in fig.:
      Measuring
      instrument for earth leakage current tests, which takes into
      account impedance and sensitivity of a person touching
      unearthed accessible parts. The current value is calculated
      by dividing the measured voltage by 500
      . If inputs and/or
      outputs of K-units are connected in parallel, their individual
      leakage currents are added.
      Fig. 25
      Measuring instrument (MI) for earth leaking current tests
      according to IEC/EN 60950.
      Fig. 26
      Test set-up
      V
      MI
      500
      1500
      10 k
      220 nF
      22 nF
      10061
      Vo+
      Vo–
      N
      P
      10064
      N
      P
      MI for
      earth
      leakage
      current
      Table 14: Leakage currents
      Characteristic
      Class I
      Unit
      LK 1000, LK 2000
      Maximum earth
      Permissible according to IEC/EN 60950
      3.5
      mA
      leakage current
      Specified value at 264 V, 50 Hz
      1.43
      Safety of operator accessible output circuit
      If the output circuit of an AC-DC converter is operator ac-
      cessible, it shall be an SELV circuit according to the IEC/EN
      60950 related safety standards.
      The following table shows a possible installation configura-
      tion, compliance with which causes the output circuit of an
      K series AC-DC converter to be an SELV circuit according
      to IEC/EN 60950 up to a configured output voltage (sum of
      nominal voltages if in series or +/– configuration) of 36 V.
      However, it is the sole responsibility of the installer to as-
      sure the compliance with the relevant and applicable safety
      regulations. More information is given in
      Technical Informa-
      tion: Safety.
      If the K series AC-DC converters are used as DC-DC con-
      verters, please refer to the data sheet
      DC-DC converters
      >100 W: K series.
      Table 15: Safety concept leading to an SELV output circuit
      Conditions
      AC-DC converter
      Installation
      Result
      Nominal voltage
      Grade of insulation
      Measures to achieve the resulting
      Safety status of the AC-DC
      between input and output
      safety status of the output circuit
      converter output circuit
      provided by the AC-DC converter
      Mains
      Double or reinforced
      Earthed case 1 and installation
      SELV circuit
      ≤250 V AC
      according to the applicable standards
      1 The earth connection has to be provided by the installer according to the relevant safety standards, e.g. IEC/EN 60950.
      AC-DC
      con-
      verter
      Mains
      SELV
      Earth connection
      +
      ~
      10021
      Fuse
      Fig. 27
      Schematic safety concept. Use fuses and earth connec-
      tion as per: Installation Instructions and table: Safety con-
      cept leading to an SELV output circuit.
      相關PDF資料
      PDF描述
      LK1001-9PD7TB2 1-OUTPUT 150 W AC-DC REG PWR SUPPLY MODULE
      LK1001-9RD2TB2 1-OUTPUT 150 W AC-DC REG PWR SUPPLY MODULE
      LK1301-7EPDDB1 1-OUTPUT 150 W AC-DC REG PWR SUPPLY MODULE
      LK1301-9ERD5B2 1-OUTPUT 150 W AC-DC REG PWR SUPPLY MODULE
      LK1501-7EPD2B2 1-OUTPUT 150 W AC-DC REG PWR SUPPLY MODULE
      相關代理商/技術參數(shù)
      參數(shù)描述
      LK1001-9ER 制造商:Power-One 功能描述:ACDC - Bulk
      LK100-24P 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Optoelectronic
      LK100-28P 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Optoelectronic
      LK10051R0K-T 功能描述:固定電感器 INDCTR STD MULTILYR 0402 1uH 10% RoHS:否 制造商:AVX 電感:10 uH 容差:20 % 最大直流電流:1 A 最大直流電阻:0.075 Ohms 工作溫度范圍:- 40 C to + 85 C 自諧振頻率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接類型:SMD/SMT 封裝 / 箱體:6.6 mm x 4.45 mm
      LK10051R0K-T 制造商:TAIYO YUDEN 功能描述:Inductor Series:LF LK