參數資料
型號: LICAL-TRC-MT
廠商: Linx Technologies Inc
文件頁數: 11/44頁
文件大?。?/td> 0K
描述: IC TRANSCODER MT BI-DIR 20-SSOP
特色產品: MT Series Transcoder
標準包裝: 1
系列: MT
類型: 數據代碼轉換器
應用: 警報系統,通信系統
電壓 - 電源,模擬: 2.0 V ~ 5.5 V
安裝類型: 表面貼裝
封裝/外殼: 20-SSOP(0.209",5.30mm 寬)
供應商設備封裝: 20-SSOP
包裝: 標準包裝
其它名稱: LICAL-TRC-MTDKR
15
The MT Series transcoder can store up to sixty unique addresses in its
memory. If a transcoder is re-learned, its permissions are overwritten. The
transcoder does not create a second instance of the same address. If a
new transcoder is learned while the memory is full, then the transcoder
writes the new address over the first address in memory. It flashes the
MODE_IND line five times to indicate that the memory is full and the next
address learned will overwrite the first. All of the learned addresses are
retained if power is removed from the transcoder.
If the CRT/LRN line is held high for ten seconds while the ENC_SEL line is
low, then the transcoder erases all of the stored addresses from memory.
The MODE_IND line goes high for as long as the CRT/LRN line is high,
but after the ten seconds it goes low. Once the CRT/LRN line is pulled low
again, the MODE_IND line goes high for two seconds to indicate that the
memory has been cleared.
Transmit Mode
When any of the status lines that are set as inputs go high, the transcoder
enters Transmit Mode. It pulls the TR_PDN line high to activate the
transceiver, pulls the TR_SEL line high to place the transceiver into transmit
mode, records the states of the status lines, assembles the packet,
and sends it through the TR_DATA line. The transcoder then pulls the
TR_SEL line low to place the transceiver into receive mode and looks for a
confirmation from the remote transcoder. If a valid confirmation is received,
then the transcoder pulls the CONFIRM line high, otherwise it checks to
see if any status line inputs are high.
The transcoder continues this for as long as any of the status line inputs
are high, updating the states of the status lines with each transmission.
Once all of the input lines are pulled low, the transcoder finishes the
current transmission, pulls CONFIRM and TR_PDN low to deactivate the
transceiver, and goes to sleep.
The MT has the ability to control the status line byte through the SIE. An
external microcontroller or PC can be used to write the desired input states
and a packet counter into the transcoder. The transcoder uses this byte
instead of looking at the status line inputs, sends the specified number of
packets, then goes to sleep. This is subject to the I/O settings, so lines set
as outputs cannot be set high.
相關PDF資料
PDF描述
LT1331CNW#PBF IC TXRX 5V/3V RS232 28-DIP
LT1341CG#TRPBF IC TXRX 5V RS232 SHUTDOWN 28SSOP
LT1342CG IC TXRX 5V RS232 W/3VLOGC 28SSOP
LT1794CSW#PBF IC OPAMP 200MHZ DUAL 20-SOIC
LT6301IFE IC XDSL LINE DRIVER DUAL 28TSSOP
相關代理商/技術參數
參數描述
LI-CAM-AR0331 功能描述:視頻模塊 Aptina AR0331 HD WDR CAMERA BOARD RoHS:否 制造商:Leopard Imaging 產品:Camera Modules 支持的視頻格式:H.264, MPEG4, MJPEG 每秒幀數:30 顯示分辨率—像素:1920 x 1080 接口類型:RS-485, USB 工作電源電壓:12 V 最大工作溫度:+ 45 C 尺寸:113.3 mm x 57.6 mm x 32.2 mm
LI-CAM-AR0331-324-1.8 功能描述:視頻模塊 Aptina AR0331 IP CAMERA BOARD RoHS:否 制造商:Leopard Imaging 產品:Camera Modules 支持的視頻格式:H.264, MPEG4, MJPEG 每秒幀數:30 顯示分辨率—像素:1920 x 1080 接口類型:RS-485, USB 工作電源電壓:12 V 最大工作溫度:+ 45 C 尺寸:113.3 mm x 57.6 mm x 32.2 mm
LI-CAMFLEX 功能描述:程序設計器配件 2" CAMERA EXTENSION CABLE RoHS:否 制造商:Lattice 產品:ispDOWNLOAD Cables 用于:In-system Programming
LI-CAM-IMX036 功能描述:視頻模塊 Sony iMX036 HD IP CAMERA BOARD RoHS:否 制造商:Leopard Imaging 產品:Camera Modules 支持的視頻格式:H.264, MPEG4, MJPEG 每秒幀數:30 顯示分辨率—像素:1920 x 1080 接口類型:RS-485, USB 工作電源電壓:12 V 最大工作溫度:+ 45 C 尺寸:113.3 mm x 57.6 mm x 32.2 mm
LI-CAM-IMX036-1.8 功能描述:視頻模塊 Sony IMX036 IP CAMERA BOARD RoHS:否 制造商:Leopard Imaging 產品:Camera Modules 支持的視頻格式:H.264, MPEG4, MJPEG 每秒幀數:30 顯示分辨率—像素:1920 x 1080 接口類型:RS-485, USB 工作電源電壓:12 V 最大工作溫度:+ 45 C 尺寸:113.3 mm x 57.6 mm x 32.2 mm