
No. 5784-2/7
LC895925
Parameter
Symbol
Conditions
Ratings
Unit
Maximum power supply voltage
VDD max
–0.3 to +7.0
V
I/O voltage
VI, VO
–0.3 to VDD+0.3
V
Maximum power dissipation
Pd max
Ta ≤ 70°C
600
mW
Operating temperature
Topr
–30 to +70
°C
Storage temperature
Tstg
–55 to +125
°C
Solder resistance
10 seconds
260
°C
Specifications
Maximum Ratings at Ta = 25°C, VSS = 0 V
Parameter
Symbol
Conditions
Ratings
Unit
min
typ
max
Input high level voltage
VIH
TTL levels, for pin types 1 and 6
2.2
V
Input low level voltage
VIL
0.8
V
Input high level voltage
VIH
TTL levels, for pin type 4, with pull-up resistors
2.2
V
Input low level voltage
VIL
0.8
V
Input high” level voltage
VIH
TTL levels, for pin 0 and 7, with Schmitt inputs
2.5
V
Input low level voltage
VIL
0.6
V
Output high level voltage
VOH
IOH = –2 mA, for pin type 3
VDD – 2.1
V
Output low level voltage
VOL
IOL = 2 mA, for pin type 3
0.4
V
Output high level voltage
VOH
IOH = -2 mA, for pin types 2, 4, and 6
VDD – 2.1
V
Output low level voltage
VOL
IOL = 2 mA, for pin types 2, 4, and 6
0.4
V
Output high level voltage
VOH
IOH = -48 mA, for pin type 7
VDD – 2.1
V
Output low level voltage
VOL
IOL = 48 mA, for pin type 7
0.4
V
Output low level voltage
VOL
IOL = 2 mA, for pin type 5
0.4
V
Input leak current
IIL
VI = VSS, VDD, for pin types 0, 1, 6, and 7
–10
+10
μA
Pull-up resistance
RUP
For pin types 4 and 5
40
80
160
kΩ
DC Characteristics at Ta = –30 to +70°C, VSS = 0 V, VDD = 4.5 to 5.5 V
Parameter
Symbol
Conditions
Ratings
Unit
min
typ
max
Supply voltage
VDD
4.5
5.0
5.5
V
Input voltage range
VIN
0VDD
V
Permissible Operating Range at Ta = –30 to +70°C, VSS = 0 V
The pin types above refer to the following groups.
Input
(0) BCK, BICLKIN, BIDATAI, C2PO, LOCKIN, LRCK, PLLOUTIN, ROUGH, SBSO, SCOR, SDATA, WFCK, CS,
RD, WR
(1) SUA0 to SUA6, TEST0 to TEST6, X1EN, RESET
Output
(2) CLV+, CLV–, FSW
(3) DATACKO, EFM, EFMG, EFMGATE0 to EFMGATE6, EXCK, LOCK, MCK, MON, PSUBSYNC, RA0 to RA9,
SUBSYNC, CAS0 to CAS1, RAS0 to RAS1, ERROR, EXTACK, FRCK, LWE, UWE, OE
Input/Output
(4) D0 to D7, IO0 to IO15
(5) INT0 to INT1, SWAIT
(6) ATIPSYNC, Reserve0 to Reserve5
(7) ACK, ATN, BSY, C/D, DB0 to DB7, DBP, I/O, MSG, REQ, RST, SEL
Note: The XTAL0, XTAL1, XTALCK0, and XTALCK1 pins fall outside of these DC characteristic specifications.