參數資料
型號： KSZ8993
廠商： Micrel Inc
文件頁數： 5/35頁
文件大?。?/td> 0K
描述： IC SWITCH 10/100 3PORT 128PQFP
標準包裝： 66
系列： *
類型： *
應用： *
安裝類型： 表面貼裝
封裝/外殼： 128-BFQFP
供應商設備封裝： 128-PQFP（14x20）
包裝： 托盤
產品目錄頁面： 1081 (CN2011-ZH PDF)
其它名稱： 576-1032
May 2005
13
KS8993
Micrel
Group
I/O Names
Active Status
Description
VMDIS
H
VLAN Mismatch Discard control.
Pulled low = Constrict multicast and broadcast packets to VLAN.
Pulled high = Constrict all packets to VLAN (default).
PRSV
H
Reserve priority buffers.
Pulled low = No buffers reserved (default).
Pulled high = Reserve 96 buffers per port for high priority queue.
PBASE[2:0]
H
Priority base value used to compare with priority tag in 802.1p tag. When a packet is
received that has a 802.1p tag and 802.1p processing is enabled (Px_1PEN=H), the
PBASE value is compared to the tag priority field. If the packet tag is greater than or
equal to the PBASE value, the packet is sent to the higher priority transmit queue
while tags less than PBASE are sent to the lower priority queue. (default = 100).
PV12
H
VLAN mask bits. Used to select which ports are seen from any particular port. Use
PV13
the table below to select VLAN operation.
PV21
P1_V defined as (PV13, PV12, 1)
PV23
P2_V defined as (PV23, 1 , PV21)
PV31
P3_V defined as (1 , PV32, PV31)
PV32
P[3:1]_V
Port
2
1
0
VLAN State
1
0
1
Ports 1 and 2 in VLAN
1
0
1
Ports 1 and 3 in VLAN
1
Ports 1, 2 and 3 in VLAN (default)
2
0
1
Ports 1 and 2 in VLAN
1
0
Ports 2 and 3 in VLAN
1
Ports 1, 2 and 3 in VLAN (default)
3
1
0
1
Ports 1 and 3 in VLAN
1
0
Ports 2 and 3 in VLAN
1
Ports 1, 2 and 3 in VLAN (default)
Note that a minimum of 2 ports are required for each VLAN. The VLAN configuration
is viewed from the receiver perspective. All states not listed above are invalid.
P[3:1]_1PEN
H
Enables 802.1p prioritizing on a per port basis. The enable is from the receive
perspective. If the 802.1p processing is disabled or there is no tag, priority is dete-
mined by the P[3:1]_PP bit.
Pulled low = Disable 802.1p prioritizing (default).
Pulled high = Enable 802.1p prioritizing.
P[3:1]_PP
H
Selects port receive priority in the absence of 802.1p handling.
Pulled low = Low priority (default).
Pulled high = High priority.
P[3:1]_TAGINS
H
Inserts 802.1p tag in received packets if not already existent. The priority field is set
based on the port P[3:1]_PP bit. For the P[3:1]_PP bit tied low, the priority field is set
to 000 and for the P[3:1]_PP bit tied high, the priority field is set to 111.
Pulled low = No change to received packet (default).
Pulled high = Insert 802.1p tag.
Note that if P[3:1]_TAGINS and P[3:1]_TAGRM are both set for the same port, there
is no change to the packet.
P[3:1]_TAGRM
H
Removes 802.1p tag in received packets if they exist.
Pulled low = No change to received packet (default).
Pulled high = Remove 802.1p tag.
Note that if P[3:1]_TAGINS and P[3:1]_TAGRM are both set for the same port, there
is no change to the packet.
P[3:1]_TXQ2
H
Selects transmit queue split on a per port basis. The split sets up high and low priority
queues.
Pulled low = Single transmit queue (default)
Pulled high = Separate high and low transmit queues
相關PDF資料
PDF描述
KSZ8993MI IC SWITCH 10/100 W/TXRX 128PQFP
LFEC6E-3TN144C IC FPGA 6.1KLUTS 144TQFP
LFXP3E-5T144C IC FPGA 3.1KLUTS 100I/O 144-TQFP
LFXP3E-4T144I IC FPGA 3.1KLUTS 100I/O 144-TQFP
LFXP3C-5T144C IC FPGA 3.1KLUTS 100I/O 144-TQFP
相關代理商/技術參數
參數描述
KSZ8993-EVAL 功能描述:BOARD EVALUATION FOR KSZ8993 RoHS:是 類別:編程器，開發系統 >> 過時/停產零件編號 系列:- 標準包裝:1 系列:- 類型:MCU 適用于相關產品:Freescale MC68HC908LJ/LK（80-QFP ZIF 插口） 所含物品:面板、纜線、軟件、數據表和用戶手冊 其它名稱:520-1035
KSZ8993F 功能描述:以太網 IC Single Chip Fast Ethernet Media Converter - Lead free RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
KSZ8993F-A1 功能描述:IC CONV MED 10/100 3PORT 128PQFP RoHS:是 類別:集成電路 (IC) >> 專用 IC 系列:* 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- 類型:調幀器 應用:數據傳輸 安裝類型:表面貼裝 封裝/外殼:400-BBGA 供應商設備封裝:400-PBGA（27x27） 包裝:散裝
KSZ8993F-EVAL 功能描述:BOARD EVALUATION FOR KSZ8993F RoHS:是 類別:編程器，開發系統 >> 過時/停產零件編號 系列:- 標準包裝:1 系列:- 類型:MCU 適用于相關產品:Freescale MC68HC908LJ/LK（80-QFP ZIF 插口） 所含物品:面板、纜線、軟件、數據表和用戶手冊 其它名稱:520-1035
KSZ8993FL 功能描述:以太網 IC 2+1 Port 10/100 Switch w/Transceivers & TS-1000 OAM, single 3.3V supply, 128-PQFP, Lead free RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*