參數資料
型號： KS8995M
廠商： Micrel Inc
文件頁數： 37/73頁
文件大?。?/td> 0K
描述： IC SWITCH 10/100 5PORT 128PQFP
標準包裝： 66
系列： *
類型： *
應用： *
安裝類型： 表面貼裝
封裝/外殼： 128-BFQFP
供應商設備封裝： 128-PQFP（14x20）
包裝： 散裝
KS8995M
Micrel
M9999-120403
42
December 2003
Address
Name
Description
Mode
Default
1
Legal Maximum Packet
1, will accept packet sizes up to 1536 bytes (inclusive).
R/W
Pin PMRXER
size check disable
0, 1522 bytes for tagged packets (not including packets
strap option.
with STPID from CPU to ports 1-4), 1518 bytes for
Pull-down (0):
untagged packets. Any packets larger than the specified
1518/1522 byte
value will be dropped.
packets. Pull-up
(1): 1536 byte
packets.
Note: PMRXER
has internal pull
down.
0
Priority Buffer reserve
1, Each output queue is pre-allocated 48 buffers,
R/W
0
used exclusively for high priority packets. It is
recommended to enable this when priority queue
feature is turned on.
0, No reserved buffers for high priority packets.
Register 5 (0x05): Global Control 3
7
802.1q VLAN enable
1, 802.1q VLAN mode is turned on. VLAN table needs
R/W
0
to set up before the operation.
0, 802.1q VLAN is disabled.
6
IGMP snoop enable on
1, IGMP snoop enabled. All the IGMP packets will be
R/W
0
Switch MII interface
forwarded to switch MII port.
0, IGMP snoop disabled.
5
Enable direct mode on
1, direct mode on port 5. This is a special mode for the
R/W
0
Switch MII interface
switch MII interface. Using preamble before MRXDV to
direct switch to forward packets, bypassing internal
look-up.
0, normal operation.
4
Enable pre tag on
1, packets forwarded to switch MII interface will be
R/W
0
Switch MII interface
pre-tagged with the source port number.
(preamble before MRXDV)
0, normal operation.
3-2
Priority Scheme select
00 = always deliver high priority packets first.
R/W
00
01 = deliver high/low packets at ratio 10/1.
10 = deliver high/low packets at ratio 5/1.
11 = deliver high/low packets at ratio 2/1.
1
Enable “tag” mask
1, the last 5 digits in the VID field are used as a mask
R/W
0
to determine which port(s) the packet should be
forwarded to.
0, no tag masks.
0
Sniff mode select
1, will do Rx AND Tx sniff (both source port and
R/W
0
destination port need to match).
0, will do Rx OR Tx sniff (Either source port or
destination port needs to match). This is the mode
used to implement Rx only sniff.
Register 6 (0x06): Global Control 4
7
Switch MII back
1, enable half-duplex back pressure on switch MII
R/W
0
pressure enable
interface.
0, disable back pressure on switch MII interface.
6
Switch MII half
1, enable MII interface half-duplex mode.
R/W
Pin SMRXD2 strap
duplex mode
0, enable MII interface full-duplex mode.
option. Pull-down
(0): Full duplex
mode. Pull-up
(1): Half duplex
mode
Note:
SMRXD2 has
internal pull down.
相關PDF資料
PDF描述
KS8993M IC SWITCH 10/100 3PORT 128PQFP
ESA49DTAH CONN EDGECARD 98POS R/A .125 SLD
EMA49DTAH CONN EDGECARD 98POS R/A .125 SLD
LFXP20E-4F388C IC FPGA 19.7KLUTS 268I/O 388-BGA
ESA49DTAD CONN EDGECARD 98POS R/A .125 SLD
相關代理商/技術參數
參數描述
KS8995M_0607 制造商:MICREL 制造商全稱:Micrel Semiconductor 功能描述:Integrated 5-Port 10/100 Managed Switch
KS8995MA 功能描述:IC SWITCH 10/100 5PORT 128PQFP RoHS:是 類別:集成電路 (IC) >> 專用 IC 系列:* 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- 類型:調幀器 應用:數據傳輸 安裝類型:表面貼裝 封裝/外殼:400-BBGA 供應商設備封裝:400-PBGA（27x27） 包裝:散裝
KS8995MA_11 制造商:MICREL 制造商全稱:Micrel Semiconductor 功能描述:Integrated 5-Port 10/100 Managed Switch
KS8995MA-EVAL 功能描述:BOARD EVAL EXPERIMENT KS8995MA RoHS:否 類別:編程器，開發系統 >> 過時/停產零件編號 系列:- 標準包裝:1 系列:- 類型:MCU 適用于相關產品:Freescale MC68HC908LJ/LK（80-QFP ZIF 插口） 所含物品:面板、纜線、軟件、數據表和用戶手冊 其它名稱:520-1035
KS8995MAI 功能描述:IC SWITCH 10/100 5PORT 128PQFP RoHS:否 類別:集成電路 (IC) >> 專用 IC 系列:* 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- 類型:調幀器 應用:數據傳輸 安裝類型:表面貼裝 封裝/外殼:400-BBGA 供應商設備封裝:400-PBGA（27x27） 包裝:散裝
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*