
Rev. 1.1 June. 2005
DDR SDRAM
DDR SDRAM 512Mb C-die (x4, x8, x16)
 (V=Valid, X=Don
′
t Care, H=Logic High, L=Logic Low)
8.0  Command Truth Table
Note : 
1. OP Code  : Operand Code.   A
0
 ~ A
13
& BA
0
 ~ BA
1
 : Program keys. (@EMRS/MRS)
2. EMRS/MRS can be issued only at all banks precharge state.
    A new command can be issued 2 clock cycles after EMRS or  MRS.
3. Auto refresh functions are same as the CBR refresh of DRAM.
    The automatical precharge without row precharge command is meant by "Auto".
    Auto/self refresh can be issued only at all banks precharge state.
4. BA
0
 ~ BA
1
 : Bank select addresses.
    If both BA
0
 and BA
1 
are "Low" at read, write, row active and precharge, bank A is selected.
    If BA
0
 is "High" and BA
1 
is "Low" at read, write, row active and precharge, bank B is selected.
    If BA
0
 is "Low" and BA
1 
is "High" at read, write, row active and precharge, bank C is selected.
    If both BA
0
 and BA
1 
are "High" at read, write, row active and precharge, bank D is selected.
5. If A
10
/AP is "High" at row precharge, BA
0
 and  BA
1
 are ignored and all banks are selected.
6. During burst write with auto precharge, new read/write command can not be issued.
    Another bank read/write command can be issued after the end of burst.
    New row active of the associated bank can be issued at t
RP
 after the end of burst.
7. Burst stop command is valid at every burst length.
8. DM(x4/8) sampled at the rising and falling edges of the DQS and Data-in are masked at the both edges (Write DM latency is 0). 
    UDM/LDM(x16 only) sampled at the rising and falling edges of the UDQS/LDQS and Data-in are masked at the both edges
    (Write UDM/LDM latency is 0).
9. This combination is not defined for any function, which means "No Operation(NOP)"  in DDR SDRAM.
COMMAND
CKEn-1 CKEn
CS
RAS
CAS
WE
BA0,1
A10/AP
 A0 ~ A9,
A11 ~ A12
Note
Register
Extended MRS 
H
X
L
L
L
L
OP CODE
1, 2
Register
Mode Register Set
H
X
L
L
L
L
OP CODE
1, 2
Refresh
Auto Refresh
H
H
L
L
L
H
X
3
Self 
Refresh
Entry
L
3
Exit
L
H
L
H
H
H
X
3
H
X
X
X
3
Bank Active & Row Addr.
H
X
L
L
H
H
V
Row Address
Read &
Column Address
Auto Precharge Disable
H
X
L
H
L
H
V
L
Column
Address
4
Auto Precharge Enable
H
4
Write &
Column Address
Auto Precharge Disable
H
X
L
H
L
L
V
L
Column
Address
4
Auto Precharge Enable
H
4, 6
Burst Stop
H
X
L
H
H
L
X
7
Precharge
Bank Selection
H
X
L
L
H
L
V
L
X
All Banks
X
H
5
Active Power Down
Entry
H
L
H
X
X
X
X
L
V
V
V
Exit
L
H
X
X
X
X
Precharge Power Down Mode
Entry
H
L
H
X
X
X
X
L
H
H
H
Exit
L
H
H
X
X
X
L
V
V
V
DM(UDM/LDM for x16 only)
H
X
X
8
No operation (NOP) : Not defined
H
X
H
X
X
X
X
9
L
H
H
H
9