
Rev. 1.1 June. 2005
DDR SDRAM
DDR SDRAM 512Mb C-die (x4, x8, x16)
IDD7A : Operating current: Four bank operation
1. Typical Case: Fro DDR200,266,333: Vdd = 2.5V, T=25’C; For DDR400: Vdd=2.6V,T=25’C
     Worst Case : Vdd = 2.7V, T= 10’ C
2. Four banks are being interleaved  with tRC(min), Burst Mode, Address and Control inputs on NOP edge are not
    changing. lout = 0mA
4. Timing patterns
- B0(133Mhz, CL=2.5) : tCK = 7.5ns, CL=2.5, BL=4, tRRD = 2*tCK, tRCD = 3*tCK, Read with autoprecharge  
Read : A0 N A1 R0 A2 R1 A3 R2 N R3 A0 N A1 R0  - repeat the same timing with random address changing
*50% of data changing at every burst
  - A2(133Mhz, CL=2) : tCK = 7.5ns, CL2=2, BL=4, tRRD = 2*tCK, tRCD = 3*tCK, Read with autoprecharge
Read : A0 N A1 R0 A2 R1 A3 R2 N R3 A0 N A1 R0  - repeat the same timing with random address changing
     *50% of data changing at every burst
  - B3(166Mhz,CL=2.5) : tCK=6ns, CL=2.5, BL=4, tRRD=2*tCK, tRCD=3*tCK, Read with autoprecharge
Read : A0 N A1 R0 A2 R1 A3 R2 N R3 A0 N A1 R0  - repeat the same timing with random address changing
*50% of data changing at every burst
  - CC(200Mhz,CL = 3) : tCK = 5ns, CL = 3, BL = 4, tRCD = 3*tCK , tRC = 11*tCK, tRAS = 8*tCK
Read : A0  N  N  R0  N  N  N  N  P0  N  N  - repeat the same timing with random address changing
*50% of data changing at every transfer
     Legend : A=Activate, R=Read, W=Write, P=Precharge, N=DESELECT
IDD1  : Operating current: One bank operation
1. Typical Case: Fro DDR200,266,333: Vdd = 2.5V, T=25’C; For DDR400: Vdd=2.6V,T=25’C
     Worst Case : Vdd = 2.7V, T= 10’c
2. Only one bank is accessed with tRC(min), Burst Mode, Address and Control inputs on NOP edge are changing once 
per clock cycle.  lout = 0mA
3. Timing patterns
  - B0(133Mhz, CL=2.5) : tCK = 7.5ns, CL=2.5, BL=4, tRCD = 3*tCK, tRC = 9*tCK, tRAS = 6*tCK
Read : A0 N N R0 N N P0 N N A0 N  - repeat the same timing with random address changing
*50% of data changing at every burst
  - A2 (133Mhz, CL=2) : tCK = 7.5ns, CL=2, BL=4, tRCD = 3*tCK, tRC = 9*tCK, tRAS = 6*tCK
Read :  A0 N N R0 N N P0 N N A0 N  - repeat the same timing with random address changing
*50% of data changing at every burst
  - B3(166Mhz, CL=2.5) : tCK=6ns, CL=2.5, BL=4, tRCD=3*tCK, tRC = 10*tCK, tRAS=7*tCK
Read : A0 N N R0 N N P0 N N A0 N  - repeat the same timing with random address changing
*50% of data changing at every burst
  - CC(200Mhz,CL = 3) : tCK = 5ns, CL = 3, BL = 4, tRCD = 3*tCK , tRC = 11*tCK, tRAS = 8*tCK
Read : A0  N  N  R0  N  N  N  N  P0  N  N  - repeat the same timing with random address changing
*50% of data changing at every transfer
  Legend : A=Activate, R=Read, W=Write, P=Precharge, N=DESELECT
14.0  Detailed test condition for DDR SDRAM IDD1 & IDD7A