- 您現在的位置：買賣IC網 > PDF目錄2081 > ISL59112IEZ-T7 (Intersil)IC VIDEO BUFFER 40MHZ R-R SC70-6 PDF資料下載
參數資料
| 型號： | ISL59112IEZ-T7 |
| 廠商： | Intersil |
| 文件頁數： | 7/8頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC VIDEO BUFFER 40MHZ R-R SC70-6 |
| 標準包裝： | 1 |
| 應用： | 緩沖器 |
| 輸出類型： | 滿擺幅 |
| 電路數： | 1 |
| -3db帶寬： | 40MHz |
| 轉換速率： | 85 V/µs |
| 電流 - 電源： | 2mA |
| 電流 - 輸出 / 通道： | 115mA |
| 電壓 - 電源，單路/雙路(±)： | 2.5 V ~ 3.6 V |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 6-TSSOP，SC-88，SOT-363 |
| 供應商設備封裝： | SC-70-6 |
| 包裝： | 標準包裝 |
| 產品目錄頁面： | 1235 (CN2011-ZH PDF) |
| 其它名稱： | ISL59112IEZ-T7DKR |
7
FN6142.4
March 15, 2007
Power Supply Bypassing Printed Circuit Board
Layout
As with any modern operational amplifier, a good printed
circuit board layout is necessary for optimum performance.
Lead lengths should be as short as possible. The power
supply pin must be well bypassed to reduce the risk of
oscillation. For normal single supply operation, where the
VS- pin is connected to the ground plane, a single 4.7F
tantalum capacitor in parallel with a 0.1F ceramic capacitor
from VS+ to GND will suffice. This same capacitor
combination should be placed at each supply pin to ground if
split supplies are to be used. In this case, the VS- pin
becomes the negative supply rail.
Printed Circuit Board Layout
For good AC performance, parasitic capacitance should be
kept to minimum. Use of wire wound resistors should be
avoided because of their additional series inductance. Use
of sockets should also be avoided if possible. Sockets add
parasitic inductance and capacitance that can result in
compromised performance. Minimizing parasitic capacitance
at the amplifier's inverting input pin is very important. The
feedback resistor should be placed very close to the
inverting input pin. Strip line design techniques are
recommended for the signal traces.
ISL59112
相關PDF資料 |
PDF描述 |
|---|---|
| ISL59114IRUZ-T7 | IC VIDEO DRVR YC LPF 10-TQFN |
| ISL59115IRUZ-T7 | IC VIDEO DRVR TRI-CHN LPF 10TQFN |
| ISL59116IIZ-T7 | IC VIDEO DRVR YC LPF 9-CSP |
| ISL59117IIZ-T7 | IC VIDEO DRVR TRI-CHN LPF WLCSP |
| ISL59118IRUZ-T7 | IC VIDEO DRVR DUAL LPF 10-TQFN |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ISL59114 | 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:YC (S-video) to Composite Video Driver with LPF |
| ISL59114IRUZ | 制造商:Intersil Corporation 功能描述:ISL59114IRUZ PB-FREE YC TO COMPOSITE VIDEO DRIVER WITH LPF - Bulk |
| ISL59114IRUZ-EVALZ | 功能描述:EVAL BOARD FOR ISL59114IRUZ RoHS:是 類別:編程器，開發系統 >> 評估演示板和套件 系列:* 標準包裝:1 系列:PCI Express® (PCIe) 主要目的:接口，收發器，PCI Express 嵌入式:- 已用 IC / 零件:DS80PCI800 主要屬性:- 次要屬性:- 已供物品:板 |
| ISL59114IRUZ-T7 | 功能描述:IC VIDEO DRVR YC LPF 10-TQFN RoHS:是 類別:集成電路 (IC) >> 線性 - 放大器 - 視頻放大器和頻緩沖器 系列:- 標準包裝:1,000 系列:- 應用:驅動器 輸出類型:差分 電路數:3 -3db帶寬:350MHz 轉換速率:1000 V/µs 電流 - 電源:14.5mA 電流 - 輸出 / 通道:60mA 電壓 - 電源，單路/雙路(±):5 V ~ 12 V，±2.5 V ~ 6 V 安裝類型:表面貼裝 封裝/外殼:20-VFQFN 裸露焊盤 供應商設備封裝:20-QFN 裸露焊盤（4x4） 包裝:帶卷 (TR) |
| ISL59114RUZ-T7 | 制造商:Intersil Corporation 功能描述:YC (S-video) to Composite Video Driver with LPF |
發布緊急采購，3分鐘左右您將得到回復。