
CHAPTER 7 WINDOW REFERENCE
User’s Manual U16217EJ1V0UM
297
Function buttons
Setting-related buttons
OK
Automatically registers the event condition being edited, if any, and closes this
dialog box. The event condition becomes valid as soon as it has been
registered.
New
Newly creates an event condition in this dialog box.
An event condition name is automatically created and a new event condition is
prepared.
Set
(when a new
event link is
created or an
event link is
changed)
Registers the various event condition. Because the dialog box is not closed
even after an event has been registered, new event conditions can be
registered. Each event condition becomes valid as soon as it has been
registered.
If an already registered event condition is displayed, the <Enable> or <Disable>
button is alternately displayed.
Enable/Disable
(when a
registered event is
displayed)
Validates (enables) or invalidates (disables) the selected event condition.
However, event conditions and event link conditions cannot be enabled or
disabled.
This button and the <Set> button are alternately displayed.
Clear
(when an event is
not edited)
Clears the contents of the event condition.
This button is displayed when an event condition has not been edited.
This button and the <Restore> button are alternately displayed.
Restore
(when an event is
edited)
Restores the contents of an edited event condition.
If an event condition not registered is displayed, all the fields other than the
event name field are blank or the default values are set.
This button and the <Clear> button are alternately displayed.
Cancel
Close
Closes this dialog box.
Even if an event condition is being edited, it is not registered and the dialog box
is closed.
<Cancel> is displayed if a condition is not created, changed, or deleted;
<Close> is displayed if it is.
Help
Opens the Help window.
Buttons for opening each event setting dialog box
Add Event...
Opens the Event dialog box in the select mode, and selects or newly creates an
event condition to be set. The event condition will be added to the area
selected when the < Add Event...> button is pressed.
Add Link...
Opens the Event Link dialog box in the select mode, and selects or newly
creates an event link condition. The event link condition will be added to the
area selected when the <Add Link...> button is pressed.
Other...
Opens the dialog box for selecting the event type.
By pressing each of the buttons, each various event setting dialog box can be
opened in the new creation status.
Buttons in event manager area
Shrink <<<
(When area is
displayed)
Turns off display of the event manager area.
At this time, the size of the dialog box is reduced.
Expand >>>
(When area is not
displayed)
Displays the event manager area.
At this time, the size of the dialog box is expanded.