參數資料
型號： ICX413AQ
英文描述： Diagonal 28.40mm(Type 1.8) Frame Readout CCDImage Sensor with Square Pixel for Color Cameras
中文描述： 方形對角線二十八點四○毫米像素（180型）CCDImage傳感器讀出幀彩色攝像機
文件頁數： 13/32頁
文件大小： 441K
代理商： ICX413AQ
– 13 –
ICX411AQ
Definition of standard imaging conditions
(1) Standard imaging condition
I
:
Use a pattern box (luminance: 706cd/m
2
, color temperature of 3200K halogen source) as a subject.
(Pattern for evaluation is not applicable.) Use a testing standard lens with CM500S (t = 1.0mm) as an IR
cut filter and image at F5.6. The luminous intensity to the sensor receiving surface at this point is defined
as the standard sensitivity testing luminous intensity.
(2) Standard imaging condition
II
:
Image a light source (color temperature of 3200K) with a uniformity of brightness within 2% at all angles.
Use a testing standard lens with CM500S (t = 1.0mm) as an IR cut filter. The luminous intensity is adjusted
to the value indicated in each testing item by the lens diaphragm.
(3) Standard imaging condition
III
:
Image a light source (color temperature of 3200K) with a uniformity of brightness within 2% at all angles.
Use a testing standard lens (exit pupil distance –33mm) with CM500S (t = 1.0mm) as an IR cut filter. The
luminous intensity is adjusted to the value indicated in each testing item by the lens diagram.
1. G Sensitivity, sensitivity comparison
Set to the standard imaging condition
I
. After setting the electronic shutter mode with a shutter speed of
1/100s, measure the signal outputs (V
GR
, V
Gb
, V
R
and V
B
) at the center of each Gr, Gb, R and B channel
screen, and substitute the values into the following formulas.
V
G
= (V
Gr
+ V
Gb
)/2
Sg = V
G
×
Rr = V
R
/V
G
Rb = V
B
/V
G
[mV]
2. Saturation signal
Set to the standard imaging condition
II
. After adjusting the luminous intensity to 20 times the intensity with
the average value of the Gr signal output, 150mV, measure the minimum values of the Gr, Gb, R and B
signal outputs.
3. Smear
Set to the standard imaging condition
II
. With the lens diaphragm at F5.6 to F8, first adjust the average
value of the Gr signal output to 150mV. Measure the average values of the Gr signal output, Gb signal
output, R signal output and B signal output (Gra, Gba, Ra, Ba), and then adjust the luminous intensity to
500 times the intensity with the average value of the Gr signal output, 150mV.
After the readout clock is stopped and the charge drain is executed by the electronic shutter at the
respective H blankings, measure the maximum value (Vsm [mV]) independent of the Gr, Gb, R and B
signal outputs, and substitute the values into the following formula.
Sm = 20
×
log
(
Vsm
÷
×
×
)
[dB] (1/10V method conversion value)
1
10
1
500
Gra + Gba + Ra + Ba
4
100
30
相關PDF資料
PDF描述
ICX414AQ Diagonal 8mm(Type 1/2) Progressive Scan CCD Image Sensor with Square Pixel for Color Cameras
ICX415AL Diagonal 8mm(Type 1/2) Progressive Scan CCD Solid-state Image Sensor with Square Pixel forCCIR B/W Cameras
ICX415AQ Diagonal 8mm(Type 1/2) Progressive Scan CCD ImageSensor with Square Pixel for Color Cameras
ICX418AKB CCD IMAGE SENSOR Diag. 8mm (Type 1/2) CCD Image Sensor for NTSC Color Video Cameras (20 pages 195K Rev. E01907)
ICX418ALB Diagonal 8mm(Type 1/2) CCD Image Sensor forEIA B/W Video Cameras
相關代理商/技術參數
參數描述
ICX414AL 制造商:SONY 制造商全稱:Sony Corporation 功能描述:Diagonal 8mm Progressive Scan CCD Solid-state Image Sensor with Square Pixel for EIA B/W Cameras
ICX414AQ 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Diagonal 8mm(Type 1/2) Progressive Scan CCD Image Sensor with Square Pixel for Color Cameras
ICX415AL 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Diagonal 8mm(Type 1/2) Progressive Scan CCD Solid-state Image Sensor with Square Pixel forCCIR B/W Cameras
ICX415ALE 制造商:Sony Batteries 功能描述:
ICX415AQ 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Diagonal 8mm(Type 1/2) Progressive Scan CCD ImageSensor with Square Pixel for Color Cameras
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*