參數資料
型號： ICX406BQ
英文描述： CCD IMAGE SENSOR Diag. 8.98mm (Type 1/1.8) Frame Readout CCD Image Sensor w/Square Pixel for Color Cameras (33 pages 345K Rev. E01327-PS same as AQ different mfg. location)
中文描述： CCD圖像傳感器診斷工具。八點九八毫米（類型1/1.8）幀讀出CCD圖像傳感器瓦特/廣場像素的彩色攝像機（33頁345K牧師E01327 - PS部門不同的蒽醌制相同。位置）
文件頁數： 11/18頁
文件大?。?/td> 178K
代理商： ICX406BQ
–
11
–
ICX404AK
7. Dark signal
Measure the average value of the Y signal output (Ydt [mV]) with the device ambient temperature 60
°
C and
the device in the light-obstructed state, using the horizontal idle transfer level as a reference.
8. Dark signal shading
After measuring 7, measure the maximum (Ydmax [mV]) and minimum (Ydmin [mV]) values of the Y signal
output and substitute the values into the following formula.
Ydt = Ydmax
–
Ydmin [mV]
9. Flicker
1) Fy
Set to standard imaging condition
II
. Adjust the luminous intensity so that the average value of the Y signal
output is 200mV, and then measure the difference in the signal level between fields (
Yf [mV]). Then
substitute the value into the following formula.
Fy = (
Yf/200)
×
100 [%]
2) Fcr, Fcb
Set to standard imaging condition
II
. Adjust the luminous intensity so that the average value of the Y signal
output is 200mV, insert an R or B filter, and then measure both the difference in the signal level between
fields of the chroma signal (
Cr,
Cb) as well as the average value of the chroma signal output (CAr, CAb).
Substitute the values into the following formula.
Fci = (
Ci/CAi)
×
100 [%] (i = r, b)
10. Line crawls
Set to standard imaging condition
II
. Adjust the luminous intensity so that the average value of the Y signal
output is 200mV, and then insert a white subject and R, G, and B filters and measure the difference
between Y signal lines for the same field (
Ylw,
Ylr,
Ylg,
Ylb [mV]). Substitute the values into the
following formula.
Lci = (
Yli/200)
×
100 [%] (i = w, r, g, b)
11. Lag
Adjust the Y signal output value generated by strobe light to 200mV. After setting the strobe light so that it
strobes with the following timing, measure the residual signal (Ylag). Substitute the value into the following
formula.
Lag = (Ylag/200)
×
100 [%]
Ylag (lag)
Y signal output 200mV
Light
FLD
V1
Strobe light
timing
Output
相關PDF資料
PDF描述
ICX406BQF CCD IMAGE SENSOR Diag. 8.98mm (Type 1/1.8) Frame Readout CCD Image Sensor w/Square Pixel for Color Cameras (33 pages 349K Rev. E01331-PS same as AQF different mfg. location)
ICX404AK Diagonal 6mm (Type 1/3) CCD Image Sensor for NTSC Color Video Cameras(對角線式、3毫米(1/6型)CCD圖像傳感器（用于NTSC彩色攝像機）)
ICX411AQ Diagonal 8.98mm(Type 1/1.8) Frame Readout CCDImage Sensor with a Square Pixel for Color Cameras
ICX412AQ Diagonal 8.933mm(Type 1/1.8) Frame Readout CCDImage Sensor with a Square Pixel for Color Cameras
ICX413AQ Diagonal 28.40mm(Type 1.8) Frame Readout CCDImage Sensor with Square Pixel for Color Cameras
相關代理商/技術參數
參數描述
ICX406BQF 制造商:未知廠家 制造商全稱:未知廠家 功能描述:CCD IMAGE SENSOR Diag. 8.98mm (Type 1/1.8) Frame Readout CCD Image Sensor w/Square Pixel for Color Cameras (33 pages 349K Rev. E01331-PS same as AQF different mfg. location)
ICX408AK 制造商:SONY 制造商全稱:Sony Corporation 功能描述:Diagonal 6mm (Type 1/3) CCD Image Sensor for NTSC Color Video Cameras
ICX408AL 制造商:SONY 制造商全稱:Sony Corporation 功能描述:Diagonal 6mm (Type 1/3) CCD Image Sensor for EIA B/W Video Cameras
ICX409AK 制造商:SONY 制造商全稱:Sony Corporation 功能描述:Diagonal 6mm (Type 1/3) CCD Image Sensor for PAL Color Video Cameras
ICX409AL 制造商:SONY 制造商全稱:Sony Corporation 功能描述:Diagonal 6mm (Type 1/3) CCD Image Sensor for CCIR B/W Video Cameras
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*