
A48
Card Bus Socket Connectors
IC9 Series
I
Features
1. Compliant with PC Card Standards
Complies with latest requirements of PC Card
Standard.
2. Repairable
Repairable terminations of connector solder
joints after installation on the board.
3. Lead Offset
Available with two board mounting levels of
terminations, to allow use of different height
components.
I
Materials
Part
Material
PA
Finish
Black
Notes
UL94V-0
Insulator
Contact
Ground plate
Phosphor bronze
Brass
Contact Area : gold plating
Lead Area
Contact Area : gold plating
Lead Area
: solder plating
: solder plating
-----------------
-----------------
I
Product Specifications
500 V DC
500 V AC / 1 minute
1 mA
Frequency: 10 to 2000 Hz, single amplitude of 0.75 mm or
acceleration of 147 m/s
2
(peak), 4 hours in each of the 3 directions.
96 hours at temperature of 40 and humidity of 90% to 95%
-55
, 30 min
/
15 to 30
, within 5 min
/
85
30 min
/
15 to 35
, within 5 min, for 5 cycles
10000 cycles at 400 to 600 cycles per hour
Reflow: At the recommended temperature profile
Manual soldering: 300 for 3 seconds
1000M
ohms
min.
No flashover or insulation breakdown.
40 m
ohms
max. (initial value)
No electrical discontinuity of 100ns or
more
Insulation resistance: 100 M
ohms
min.
No damage, cracks, or parts looseness.
Change of contact resistance from the
start should be 20 m
ohms
max.
No deformation of components
affecting performance.
1. Insulation resistance
2.
Withstanding voltage
3. Contact resistance
4. Vibration
5.
Humidity (Steady state)
6.
Temperature cycle
7.
Durability
(Insertion/withdrawal)
8. Resistance to
soldering heat
Ratings
Current rating
Voltage rating
0.5 A
125 V AC
Operating temperature
Operating humidity
-55
to +85
(Note 1)
95% R.H. or less (No condensation)
Storage temperature
Storage humidity
-10
to +60
(Note 2)
40 to 70% (Note 2)
Item
Specification
Conditions
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature
Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during
transportation.