- 您現在的位置：買賣IC網 > PDF目錄360680 > IA59032-CPGA100M Microprocessor PDF資料下載
參數資料
| 型號： | IA59032-CPGA100M |
| 英文描述： | Microprocessor |
| 中文描述： | 微處理器 |
| 文件頁數： | 5/17頁 |
| 文件大?。?/td> | 75K |
| 代理商： | IA59032-CPGA100M |
Page 5 of 17
Data Sheet
IA59032
32-Bit High Speed Microprocessor Slice
Copyright
2000
innov
ASIC
[_________
The End of Obsolescence
A detailed block diagram for the IA59032 is shown in
Figure 1
. The two key elements in the block diagram
are the 32 word by 32-bit 2-port RAM and the high-speed ALU.
Data in any of the 32 words of the RAM can be read from the A-port of the RAM as controlled by the 4-bit
A address field input. Likewise, data in any of the 32 words of the RAM as defined by the B address field
input can be simultaneously read from the B-port of the RAM. The same code can be applied to the A select
field and B select field in which case the identical file data will appear at both the RAM A-port and B-port
outputs simultaneously.
When enabled by the RAM write enable (CP low), new data is always written into the file (word) defined by
the B address field of the RAM. The RAM data input field is driven by a 3-input mux. This configuration is
used to shift the ALU output data F if desired. This three-input mux scheme allows the data to be shifted up
one bit position, shifted down one bit position, or not shifted in either direction.
The high speed ALU can perform three binary arithmetic and five logic operations on the two 32-bit input
words R and S. The R input field is driven from a 2-input mux, while the S input field is driven by a 3-input
mux. Both muxes also have an inhibit capability; that is, no data is passed. This is equivalent to a “zero”
source operand.
Referring to
Figure 1
, the ALU R-input mux has the RAM A-port and the direct data inputs (D) connected as
inputs. Likewise, the ALU S-input mux has the RAM A-port, B-port, and the Q register connected as inputs.
This muxing scheme provides the capability of selecting various pairs of the A, B, D, Q, and zero inputs as
source operands to the ALU. These five inputs, when taken two at a time, result in ten possible
combinations of source operand pairs. The I(2:0) inputs are the microinstruction inputs used to select the
ALU source operands.
The two source operands not fully described as yet are the D input and the Q input. The D input is the 32-
bit wide direct data field input. This port is used to insert all data into the working registers inside the device.
Likewise, this input can be used in the ALU to modify any of the internal data files. The Q register is a
separate 32-bit file intended primarily for multiplication and division routines but it can also be used as an
accumulator or holding register for some applications.
The ALU itself is capable of performing three binary arithmetic and five logic functions. The I(5:3) inputs
are used to select the ALU function.
The ALU has three status-oriented outputs. These are F31, FZERO, and OVR. The F31 output is the most
significant (sign) bit of the ALU and can be used to determine positive or negative results without enabling
the three-state data outputs. F31 is non-inverted with respect to the sign bit output Y(31). The FZERO
output is used for zero detect. It is an open-collector output. FZERO is HIGH when all F outputs are
LOW. The overflow output (OVR) is used to flag arithmetic operations that exceed the available two’s
complement number range. The OVR output is HIGH when overflow exists.
The ALU data output is routed to several destinations. It can be a data output of the device and it can also
be stored in the RAM or the Q register. Eight possible combinations of ALU destination functions are
available, as defined by the I(8:6) inputs.
相關PDF資料 |
PDF描述 |
|---|---|
| IA8-11 | Interface IC |
| IA8-11L | Interface IC |
| IA8-11LS | Interface IC |
| IA8-12 | Interface IC |
| IA8-12L | Interface IC |
相關代理商/技術參數 |
參數描述 |
|---|---|
| IA5AH | 制造商:EAC 功能描述:RELAY ELECRONIC APPLICATION S7J4B |
| IA6008-CA11A | 制造商:ROHM 制造商全稱:Rohm 功能描述:Color image sensor heads for multi-function |
| IA6008-FA22A | 制造商:ROHM 制造商全稱:Rohm 功能描述:Color image sensor heads for multi-function |
| IA6008-FB10A | 制造商:ROHM 制造商全稱:Rohm 功能描述:Color image sensor heads for multi-function |
| IA6008-FB11A | 制造商:ROHM 制造商全稱:Rohm 功能描述:Color image sensor heads for multi-function |
發布緊急采購，3分鐘左右您將得到回復。