TECHNICAL
DATA
4
Q
UALIFICATION PROCESS
HTS2010SMD sensors have been qualified through a complete qualification process taking in account many of the requirements of the MIL
STD750 including :
Solder heat and solderability
Wave soldering at 260°C + DI water clean at 45°C
Mechanical shock - 1500 g, 5 blows, 3 directions
Vibration - Variable (F = 100 - 2000Hz), fixed (F = 35Hz)
Constant acceleration
Marking permanency
ESD - Electrostatic Discharge - Human body & Machine model
Salt Atmosphere MIL STD750/Method 1041/96 hours
Temperature Cycling – -40°C / +70°C
R
ECOMMENDED FOOTPRINT
High Temperature / Humidity Operating Life - 93% RH / 60°C for
1000 hours
Low humidity storage life - RH < 10%/23°C - 1000 hours
Resistance to immersion in water at ambient temperature and 80°C
- 160 hours
Resistance to acid vapors at 75000 ppm for nitric, sulfuric and
chlorhydric acids
Resistance to many chemicals linked with home appliances / auto-
mative or consumer applications.
Dimension
A B C D E F G H L
mm (typical)
6
10 2.7 0.8
2.54 12.8 0-7° 0.2 0.1
The information in this sheet has been carefully reviewed and is believed to be accurate ; however, no responsability is assumed for inaccuracies. Furthermore, this information does not convey to the pur-
chaser of semiconductor devices any license under the patent rights to the manufacturer. Humirel reserves the right to make changes without further notice to any product herein. Humirel makes no war-
ranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Humirel assume any liability arising out of the application or use of any product or circuit and
specifically disclaims any and all liability, including without limitation consequential or incidental damages.“Typical” parameters can and do vary in different applications. Customer’s technical experts must
validate all operating parameters, including “Typical” for each customer application. Humirel does not convey any license under its patent rights nor the rights of others. Humirel products are not designed,
intended, or authorized for use as components in systems intended for surgical implant into the body, or other application intended to support or sustain life, or for any application in which the failure of
the Humirel product could create a situation where personal injury or death may occur. Should buyer purchase or use Humirel products for any such unintended or unauthorized application, Buyer shall
indemnify and hold Humirel and its officers, employees, subsidiaries, affiliates and distributors harmless against all claims, costs, damages and expenses, and reasonable attomey fees arising out of, direct-
ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Humirel was negligent regarding the design or manufacture of
the part. Humirel is a registered trademark of Humirel.
Humirel Sensor Device Data / HPC008 Rev E September 2002
ORDERING INFORMATION OF HTS2010 SMD :
HPP804B100 (TUBE M.P.Q. OF 80 PIECES).
HPP804B101 (TAPE AND REEL M.P.Q. OF 1500 PIECES).
TEMPERATURE AND RELATIVE HUMIDITY SENSORS.
email : sales@humirel.com
SAMPLE KIT OF HTS2010 SMD IS AVAILABLE THROUGH HUMIREL WEB SITE
www.humirel.com
All dimensions in mm
Scale 1:1
Standard :
EIA 481-1
CEI 60286-3
E
NVIRONMENTAL AND RECYCLING INFORMATION :
HTS2010SMD sensors are lead free components
HTS2010SMD sensors are free of Cr (VI), Cd and Hg.
P
ACKAGE OUTLINE HTS2010SMD
GULL WING
(JLEAD option also available).
Direction of feed
Cross
Section
Reel
Diameter
360 mm
Reel
Width
30.4 mm
Carrier
Tape
24 mm
Carrier
Tape
Pitch
4 mm
Carrier
Tape
Depth
4 mm
A
B
C
A
C
B