- 您現在的位置：買賣IC網 > PDF目錄1996 > HSP45106JC-33Z (Intersil)IC OSC NCO 33MHZ 84-PLCC PDF資料下載
參數資料
| 型號： | HSP45106JC-33Z |
| 廠商： | Intersil |
| 文件頁數： | 10/15頁 |
| 文件大小： | 0K |
| 描述： | IC OSC NCO 33MHZ 84-PLCC |
| 標準包裝： | 15 |
| 類型： | 數控振蕩器（NCO） |
| 頻率： | 33MHz |
| 電源電壓： | 4.75 V ~ 5.25 V |
| 電流 - 電源： | 180mA |
| 工作溫度： | 0°C ~ 70°C |
| 封裝/外殼： | 84-LCC（J 形引線） |
| 包裝： | 管件 |
| 供應商設備封裝： | 84-PLCC（29.21x29.21） |
| 安裝類型： | 表面貼裝 |
4
FN2809.8
October 16, 2008
Functional Description
The 16-bit Numerically Controlled Oscillator (NCO16)
produces a digital complex sinusoid waveform whose
frequency and phase are controlled through a standard
microprocessor interface and discrete inputs. The NCO16
generates 16-bit sine and cosine vectors at a maximum
sample rate of 33MHz. The NCO16 can be preprogrammed
to produce a constant (CW) sine and cosine output for Direct
Digital Synthesis (DDS) applications. Alternatively, the phase
and frequency inputs can be updated in real time to produce
a FM, PSK, FSK, or MSK modulated waveform. To simplify
PSK generation, a 3 pin interface is provided to support
modulation of up to 8 levels.
As shown in Figure 1, the HSP45106 Block Diagram, the
NCO16 is comprised of a Phase and Frequency Control
Section (PFCS) and Sine/ Cosine Section. The PFCS stores
the phase and frequency control inputs and uses them to
calculate the phase angle of a rotating complex vector. The
Sine/Cosine Section performs a lookup on this phase and
generates the appropriate amplitude values for the sine and
cosine. These quadrature outputs may be configured as
serial or parallel with either two's complement or offset
binary format.
Phase/Frequency Control Section
The phase and frequency of the quadrature outputs are
controlled by the PFCS (see Figure 1). The PFCS generates
a 32-bit word which represents the instantaneous phase
(Sin/Cos argument) of the sine and cosine waves being
generated. This phase is incremented on the rising edge of
each CLK by the preprogrammed amounts in the phase and
Frequency Control Registers. As the instantaneous phase
steps from 0 through full scale (232 - 1), the phase of the
quadrature outputs proceeds from 0° around the unit circle
counter clockwise.
The PFCS is comprised of a Phase Accumulator Section,
Phase Offset adder, Input Section, and a Timer Accumulator
Section. The Phase Accumulator computes the
instantaneous phase angle from user programmed values in
the Center and Offset Frequency Registers. This angle is
then fed into the Phase Offset adder where it is offset by the
preprogrammed value in the Phase Offset Register. The Input
Section routes data from a microprocessor compatible control
bus and discrete input signals into the appropriate configuration
registers. The Timer Accumulator supplies a pulse to mark the
passage of a user programmed period of time.
HSP45106
相關PDF資料 |
PDF描述 |
|---|---|
| HSP45116AVC-52Z | IC OSC NCO 52MHZ 160-MQFP |
| ICL7109EPL+ | IC ADC 12BIT 3-ST 40-DIP |
| ICM7217AIPI | IC OSC UP/DWN CNTR 2MHZ 28-DIP |
| ICM7217CIPI | IC OSC UP/DWN CNTR 2MHZ 28-DIP |
| ICM7242IPA | IC OSC BINARY CTC 13MHZ 8-DIP |
相關代理商/技術參數 |
參數描述 |
|---|---|
| HSP45106JI-25 | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| HSP45116 | 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:Numerically Controlled Oscillator/Modulator |
| HSP45116 WAF | 制造商:Intersil Corporation 功能描述: |
| HSP45116/883 | 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:Numerically Controlled Oscillator/Modulator |
| HSP45116_04 | 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:Numerically Controlled Oscillator/Modulator |
發布緊急采購，3分鐘左右您將得到回復。