- 您現在的位置：買賣IC網 > PDF目錄367208 > HMC258 (美國訊泰微波有限公司上海代表處) 600000 SYSTEM GATE 2.5 VOLT FPGA - NOT RECOMMENDED for NEW DESIGN PDF資料下載
參數資料
| 型號： | HMC258 |
| 廠商： | 美國訊泰微波有限公司上海代表處 |
| 元件分類： | FPGA |
| 英文描述： | 600000 SYSTEM GATE 2.5 VOLT FPGA - NOT RECOMMENDED for NEW DESIGN |
| 中文描述： | 砷化鎵微波單片集成電路二次諧波泵混合器，14 - 21千兆赫 |
| 文件頁數： | 6/6頁 |
| 文件大小： | 203K |
| 代理商： | HMC258 |
MICROWAVE CORPORATION
5 - 43
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
M
5
v01.0801
HMC258
GaAs MMIC SUB-HARMONICALLY
PUMPED MIXER, 14 - 21 GHz
Handling Precautions
Follow these precautions to avoid permanent damage.
Cleanliness:
Handle the chips in a clean environment. DO NOT attempt to clean the chip using liquid cleaning systems.
Static Sensitivity:
Follow ESD precautions to protect against > ± 250V ESD strikes.
Transients:
Suppress instrument and bias supply transients while bias is applied. Use shielded signal and bias cables to minimize
inductive pick-up.
General Handling:
Handle the chip along the edges with a vacuum collet or with a sharp pair of bent tweezers. The surface of the
chip has fragile air bridges and should not be touched with vacuum collet, tweezers, or fingers.
Mounting
The chip is back-metallized and can be die mounted with AuSn eutectic preforms or with electrically conductive epoxy. The mounting
surface should be clean and flat.
Eutectic Die Attach:
A 80/20 gold tin preform is recommended with a work surface temperature of 255 °C and a tool temperature
of 265 °C. When hot 90/10 nitrogen/hydrogen gas is applied, tool tip temperature should be 290 °C. DO NOT expose the chip
to a temperature greater than 320 °C for more than 20 seconds. No more than 3 seconds of scrubbing should be required for
attachment.
Epoxy Die Attach:
Apply a minimum amount of epoxy to the mounting surface so that a thin epoxy fillet is observed around the
perimeter of the chip once it is placed into position. Cure epoxy per the manufacturer’s schedule.
Wire Bonding
Ball or wedge bond with 0.025 mm (1 mil) diameter pure gold wire. Thermosonic wirebonding with a nominal stage temperature of
150 °C and a ball bonding force of 40 to 50 grams or wedge bonding force of 18 to 22 grams is recommended. Use the minimum
level of ultrasonic energy to achieve reliable wirebonds. Wirebonds should be started on the chip and terminated on the package or
substrate. All bonds should be as short as possible <0.31 mm (12 mils).
相關PDF資料 |
PDF描述 |
|---|---|
| HMC258LM3 | 600000 SYSTEM GATE 2.5 VOLT FPGA - NOT RECOMMENDED for NEW DESIGN |
| HMC259 | GaAs MMIC SUB-HARMONICALLY PUMPED MIXER 28 - 40 GHz |
| HMC260 | XCV600-4BGG432C - NOT RECOMMENDED for NEW DESIGN |
| HMC261LM1 | SMT DISTRIBUTED GaAs MMIC AMPLIFIER 20 - 32 GHz |
| HMC262 | GaAs MMIC LOW NOISE AMPLIFIER 15 - 24 GHz |
相關代理商/技術參數 |
參數描述 |
|---|---|
| HMC258_09 | 制造商:HITTITE 制造商全稱:Hittite Microwave Corporation 功能描述:GaAs MMIC SUB-HARMONICALLY PUMPED MIXER, 14 - 21 GHz |
| HMC258CB1 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Analog IC |
| HMC258LC3B | 制造商:Hittite Microwave Corp 功能描述:IC MIXER SUB-HARMONIC 12SMD |
| HMC258LC3B_09 | 制造商:HITTITE 制造商全稱:Hittite Microwave Corporation 功能描述:GaAs MMIC SUB-HARMONIC SMT MIXER, 14.5 - 19.5 GHz |
| HMC258LM3 | 制造商:HITTITE 制造商全稱:Hittite Microwave Corporation 功能描述:GaAs MMIC SUB-HARMONIC SMT MIXER, 14 - 20 GHz |
發布緊急采購，3分鐘左右您將得到回復。