- 您現在的位置：買賣IC網 > PDF目錄296185 > HLMP-LM15-QT0ZZ (AGILENT TECHNOLOGIES INC) SINGLE COLOR LED, GREEN, 4 mm PDF資料下載
參數資料
| 型號： | HLMP-LM15-QT0ZZ |
| 廠商： | AGILENT TECHNOLOGIES INC |
| 元件分類： | LED |
| 英文描述： | SINGLE COLOR LED, GREEN, 4 mm |
| 封裝： | PLASTIC PACKAGE-2 |
| 文件頁數： | 8/9頁 |
| 文件大?。?/td> | 82K |
| 代理商： | HLMP-LM15-QT0ZZ |
Wave Soldering
Manual Solder
Dipping
Pre-heat temperature
105 °C Max.
Preheat time
30 sec Max
Peak temperature
250 °C Max.
260 °C Max.
Dwell time
3 sec Max.
5 sec Max
BOTTOM SIDE
OF PC BOARD
TOP SIDE OF
PC BOARD
NOTE: ALLOW FOR BOARDS TO BE
SUFFICIENTLY COOLED BEFORE
EXERTING MECHANICAL FORCE.
CONVEYOR SPEED = 1.83 M/MIN (6 FT/MIN)
PREHEAT SETTING = 150 C (100 C PCB)
SOLDER WAVE TEMPERATURE = 245 C
AIR KNIFE AIR TEMPERATURE = 390 C
AIR KNIFE DISTANCE = 1.91 mm (0.25 IN.)
AIR KNIFE ANGLE = 40
SOLDER: SN63; FLUX: RMA
250
200
150
FLUXING
TURBULENT WAVE
PREHEAT
TIME - SECONDS
TEMPERATURE
-
C
100
50
30
0
10
20
30
40
50
60
70
80
90
100
LAMINAR WAVE
HOT AIR KNIFE
LED component
ead size
Diagonal
Plated through
hole diameter
0.457 x 0.457mm
(0.018 x 0.018inch)
0.646 mm
(0.025 inch)
0.976 to 1.078 mm
(0.038 to 0.042 inch)
0.508 x 0.508mm
(0.020 x 0.020inch)
0.718 mm
(0.028 inch)
1.049 to 1.150mm
(0.041 to 0.045 inch)
Precautions:
Lead Forming:
The leads of an LED lamp may be preformed or cut to
length prior to insertion and soldering into PC board.
If lead forming is required before soldering, care must
be taken to avoid any excessive mechanical stress
induced to LED package. Otherwise, cut the leads of
LED to length after soldering process at room
temperature. The solder joint formed will absorb the
mechanical stress of the lead cutting from traveling to
the LED chip die attach and wirebond.
It is recommended that tooling made to precisely form
and cut the leads to length rather than rely upon hand
operation.
Soldering Condition:
Care must be taken during PCB assembly and
soldering process to prevent damage to LED
component.
The closest LED is allowed to solder on board is
1.59mm below the body (encapsulant epoxy) for those
parts without standoff.
Recommendedsolderingcondition:
Recommended Wave Soldering Profile
Note: Refer to application note AN1027 for more information on
soldering LED components.
Wave soldering parameter must be set and
maintain according to recommended temperature
and dwell time in the solder wave. Customer is
advised to periodically check on the soldering
profile to ensure the soldering profile used is
always conforming to recommended soldering
condition.
If necessary, use fixture to hold the LED
component in proper orientation with respect to
the PCB during soldering process.
Proper handling is imperative to avoid excessive
thermal stresses to LED components when
heated. Therefore, the soldered PCB must be
allowed to cool to room temperature, 25°C before
handling.
Special attention must be given to board
fabrication, solder masking, surface plating and
lead holes size and component orientation to
assure solderability.
Recommended PC board plated through holes size
for LED component leads.
相關PDF資料 |
PDF描述 |
|---|---|
| HLMP-Q105.ZR | SINGLE COLOR LED, RED, 1.78 mm |
| HLMP-Q150 | SINGLE COLOR LED, RED, 1.78 mm |
| HLMP-Q152-G0012 | T-3/4 SINGLE COLOR LED, DEEP RED, 1.78 mm |
| HLMP-Q156-H0024 | T-3/4 SINGLE COLOR LED, DEEP RED, 1.78 mm |
| HLMP-Q106-R0031 | T-3/4 SINGLE COLOR LED, DEEP RED, 1.78 mm |
相關代理商/技術參數 |
參數描述 |
|---|---|
| HLMP-LM17-SV000 | 功能描述:標準LED-通孔 Green 50x100deg 0X100deg RoHS:否 制造商:Vishay Semiconductors 照明顏色:Red 光強度:0.7 mcd 波長/色溫:615 nm 顯示角:45 deg 透鏡顏色/類型:Clear, Non-Diffused 正向電流:70 mA 正向電壓:1.83 V to 3.03 V LED 大小:2 mm 系列: 封裝:Tube |
| HLMP-LM17-SV0DD | 功能描述:標準LED-通孔 Lamp 4mm InGaN Grn 5 0X100deg RoHS:否 制造商:Vishay Semiconductors 照明顏色:Red 光強度:0.7 mcd 波長/色溫:615 nm 顯示角:45 deg 透鏡顏色/類型:Clear, Non-Diffused 正向電流:70 mA 正向電壓:1.83 V to 3.03 V LED 大小:2 mm 系列: 封裝:Tube |
| HLMP-LM17-SV0ZZ | 功能描述:標準LED-通孔 Lamp 4mm InGaN Grn 5 0X100deg RoHS:否 制造商:Vishay Semiconductors 照明顏色:Red 光強度:0.7 mcd 波長/色溫:615 nm 顯示角:45 deg 透鏡顏色/類型:Clear, Non-Diffused 正向電流:70 mA 正向電壓:1.83 V to 3.03 V LED 大小:2 mm 系列: 封裝:Tube |
| HLMP-LM61-X20ZZ | 功能描述:標準LED-通孔 Lamp 4mm InGaN Grn 5 0X100deg RoHS:否 制造商:Vishay Semiconductors 照明顏色:Red 光強度:0.7 mcd 波長/色溫:615 nm 顯示角:45 deg 透鏡顏色/類型:Clear, Non-Diffused 正向電流:70 mA 正向電壓:1.83 V to 3.03 V LED 大小:2 mm 系列: 封裝:Tube |
| HLMP-LM63-X20ZZ | 功能描述:標準LED-通孔 Green 50x100deg 50X100deg RoHS:否 制造商:Vishay Semiconductors 照明顏色:Red 光強度:0.7 mcd 波長/色溫:615 nm 顯示角:45 deg 透鏡顏色/類型:Clear, Non-Diffused 正向電流:70 mA 正向電壓:1.83 V to 3.03 V LED 大小:2 mm 系列: 封裝:Tube |
發布緊急采購，3分鐘左右您將得到回復。