![](http://datasheet.mmic.net.cn/Intersil/HI5714-7CB-T_datasheet_101058/HI5714-7CB-T_5.png)
5
POWER SUPPLY CHARACTERISTICS
Analog Power Supply Range, VCCA
4.75
5.0
5.25
V
Digital Power Supply Range, VCCD
4.75
5.0
5.25
V
Output Power Supply Range, VCCO
4.75
5.0
5.25
V
Total Supply Current
-
65
75
mA
Supply Current, ICCA
-
30
-
mA
Supply Current, ICCD
-
26
-
mA
Supply Current, ICCO
-
9
-
mA
Power Dissipation
-
325
375
mW
NOTES:
2. Dissipation rating assumes device is mounted with all leads soldered to printed circuit board.
3. The supply voltages VCCA and VCCD may have any value between -0.3V and +6V as long as the difference VCCA - VCCD lies between
-0.3V and +0.3V.
4. In addition to a good layout of the digital and analog ground, it is recommended that the rise and fall times of the clock not be less than 1ns.
5. Analog input voltages producing code 00 up to and including FF. VOB (Bottom Offset Voltage) is the difference between the analog input which
produces data equal to 00 and the Bottom Reference Voltage (VRB). VOBTC (Bottom Offset Voltage Temperature Coefficient) is the variation
of VOB with temperature. VOT (Top Offset Voltage) is the difference between the Top Reference Voltage (VRT) and the analog input which
produces data output equal to FF. VOTTC (Top Offset Voltage Temperature Coefficient) is the variation of VOT with temperature.
6. Input is standard 5 step video test signal. A 12-bit R reconstruct DAC and VM700 are used for measurement.
7. Full scale sinewave, fIN = 4.43MHz.
8. fCLK = 75MHz, fIN = 4.43MHz, VIN = ±8 LSB at code 128, 50% Clock duty cycle.
9. Parameter is guaranteed by design, not production tested.
Electrical Specifications
VCCA = VCCD = VCCO = +5V; VRB = 1.3V; VRT = 3.6V; TA = 25
oC, Unless Otherwise Specified (Continued)
PARAMETER
TEST CONDITION
MIN
TYP
MAX
UNITS
HI5714