- 您現在的位置：買賣IC網 > PDF目錄370500 > HDSP-2133 Eight Character 5.0 mm (0.2 inch) Glass/Ceramic Intelligent 5 x 7 Alphanumeric Displays for Military Applications(軍用的八字符5.0 mm (0.2英寸)玻璃/陶瓷智能 5 x 7文字?jǐn)?shù)字顯示器) PDF資料下載
參數資料
| 型號： | HDSP-2133 |
| 英文描述： | Eight Character 5.0 mm (0.2 inch) Glass/Ceramic Intelligent 5 x 7 Alphanumeric Displays for Military Applications(軍用的八字符5.0 mm (0.2英寸)玻璃/陶瓷智能 5 x 7文字?jǐn)?shù)字顯示器) |
| 中文描述： | 八字5.0毫米（0.2英寸）玻璃/陶瓷智能5 × 7的軍事應用字母數字顯示器（軍用的八字符5.0毫米（0.2英寸）玻璃/陶瓷智能5 × 7文字?jǐn)?shù)字顯示器） |
| 文件頁數： | 9/16頁 |
| 文件大?。?/td> | 319K |
| 代理商： | HDSP-2133 |
9
Electrical Description
Pin Function
RESET (RST, pin 5)
Reset initializes the display.
FLASH (FL, pin 27)
FL low indicates an access to the Flash RAM and is unaffected by the
state of address lines A
3
-A
4
.
ADDRESS INPUTS
(A
0
-A
4
, pins 28-32)
Each location in memory has a distinct address. Address inputs (A
0
-A
2
)
select a specific location in the Character RAM, the Flash RAM or a
particular row in the UDC (User-Defined Character) RAM. A
3
-A
4
are
used to select which section of memory is accessed. Table 1 shows the
logic levels needed to access each section of memory.
Table 1. Logic Levels to Access Memory
FL
A
4
A
3
0
X
X
Section of Memory
A
2
Character Address
A
1
A
0
Flash RAM
1
0
0
UDC Address Register
Don't Care
1
0
1
UDC RAM
Row Address
1
1
0
Control Word Register
Don't Care
1
1
1
Character RAM
Character Address
CLOCK SELECT
(CLS, pin 1)
This input is used to select either an internal (CLS = 1) or external (CLS = 0)
clock source.
CLOCK INPUT/OUTPUT
(CLK, pin 2)
Outputs the master clock (CLS = 1) or inputs a clock (CLS = 0) for slave
displays.
WRITE (WR, pin 3)
Data is written into the display when the WR input is low and the
CE input is low.
CHIP ENABLE (CE, pin 4)
This input must be at a logic low to read or write data to the display and
must go high between each read and write cycle.
READ (RD, pin 6)
Data is read from the display when the RD input is low and the CE
input is low.
DATA Bus (D
0
-D
7
,
pins 11-14, 19-22)
The Data bus is used to read from or write to the display.
GND
(SUPPLY)
(pin 17)
GND
(LOGIC)
(pin 18)
V
DD(POWER)
(pin 16)
This is the analog ground for the LED drivers.
This is the digital ground for internal logic.
This is the positive power supply input.
相關PDF資料 |
PDF描述 |
|---|---|
| HDSP-2179 | Eight Character 5.0 mm (0.2 inch) Glass/Ceramic Intelligent 5 x 7 Alphanumeric Displays for Military Applications(軍用的八字符5.0 mm (0.2英寸)玻璃/陶瓷智能 5 x 7文字?jǐn)?shù)字顯示器) |
| HDSP-2301 | Four Character 5.0 mm (0.20 inch) 5 x 7 Alphanumeric Displays(四字符5.0 mm (0.20英寸) 5 x 7數字文字顯示器) |
| HDSP-2302 | Four Character 5.0 mm (0.20 inch) 5 x 7 Alphanumeric Displays(四字符5.0 mm (0.20英寸) 5 x 7數字文字顯示器) |
| HDSP-2303 | Four Character 5.0 mm (0.20 inch) 5 x 7 Alphanumeric Displays(四字符5.0 mm (0.20英寸) 5 x 7數字文字顯示器) |
| HDSP-2351 | Extended Temperature Four Character 5.0 mm (0.20 Inch) 5 x 7 Alphanumeric Display for Sunlight Viewable Applications(應用于日光觀察的擴展溫度四字符5.0 mm (0.20 英寸) 5 x 7 文字?jǐn)?shù)字顯示器) |
相關代理商/技術參數 |
參數描述 |
|---|---|
| HDSP-2133-JK000 | 制造商:Avago Technologies 功能描述:5X7 SMARTDISP HIREL 8CHAR .2IN GRN |
| HDSP-2179 | 功能描述:LED 顯示器和配件 Orange 602nm 5x7 Smart Display RoHS:否 制造商:Avago Technologies 顯示器類型:7 Segment 數位數量:2 字符大小:7.8 mm x 14.22 mm 照明顏色:Red 波長:628 nm 共用管腳:Common Anode 工作電壓:2.05 V 工作電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 35 C 封裝:Tube |
| HDSP-2312TXV | 制造商:Hewlett Packard Co 功能描述:5 X 7 Dot Matrix Led Display, 4-character, Red, Dip |
| HDSP-2500 | 功能描述:LED 顯示器和配件 Orange 602nm 5x7 Smart Display RoHS:否 制造商:Avago Technologies 顯示器類型:7 Segment 數位數量:2 字符大小:7.8 mm x 14.22 mm 照明顏色:Red 波長:628 nm 共用管腳:Common Anode 工作電壓:2.05 V 工作電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 35 C 封裝:Tube |
| HDSP-2501 | 功能描述:LED 顯示器和配件 Yellow 585nm 5x7 Smart Display RoHS:否 制造商:Avago Technologies 顯示器類型:7 Segment 數位數量:2 字符大小:7.8 mm x 14.22 mm 照明顏色:Red 波長:628 nm 共用管腳:Common Anode 工作電壓:2.05 V 工作電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 35 C 封裝:Tube |
發布緊急采購，3分鐘左右您將得到回復。