參數資料
型號： HD667A66R
廠商： Hitachi,Ltd.
英文描述： 132 x 176-dot Graphics LCD Controller/Driver for 65K Colors
中文描述： 132 × 176點圖形LCD控制器/驅動器的65K色
文件頁數： 43/97頁
文件大小： 681K
代理商： HD667A66R
HD66766R Rev. 1.0-1 / September 2002
43
Serial Data Transfer
Setting the IM2 pin to the “Vcc” level and the IM1 pin to the “GND” level allows standard clock-
synchronized serial data transfer, using the chip select line (CS*), serial transfer clock line (SCL), serial
input data line (SDI), and serial output data line (SDO). For a serial interface, the IM0/ID pin function
uses an ID pin. If the chip is set up for serial interface, the DB15-2 pins which are not used must be
fixed at “Vcc” or “GND”.
The HD66766R initiates serial data transfer by transferring the start byte at the falling edge of CS* input.
It ends serial data transfer at the rising edge of CS* input.
The HD66766R is selected when the 6-bit chip address in the start byte transferred from the transmitting
device matches the 6-bit device identification code assigned to the HD66766R. The HD66766R, when
selected, receives the subsequent data string. The least significant bit of the identification code can be
determined by the ID pin. The five upper bits must be “01110”. Two different chip addresses must be
assigned to a single HD66766R because the seventh bit of the start byte is used as a register select bit
(RS): that is, when RS = “0”, data can be written to the index register or status can be read, and when RS
= “1”, an instruction can be issued or data can be written to or read from RAM. Read or write is selected
according to the eighth bit of the start byte (R/W bit). The data is received when the R/W bit is “0”, and is
transmitted when the R/W bit is “1”.
After receiving the start byte, the HD66766R receives or transmits the subsequent data byte-by-byte.
The data is transferred with the MSB first. All HD66766R instructions are 16 bits. Two bytes are received
with the MSB first (DB15 to 0), then the instructions are internally executed. After the start byte has been
received, the first byte is fetched internally as the upper eight bits of the instruction and the second byte is
fetched internally as the lower eight bits of the instruction.
Five bytes of RAM read data after the start byte are invalid. The HD66766R starts to read correct RAM
data from the sixth byte.
Table 28 Start Byte Format
Transfer Bit
S
1
2
3
4
5
6
7
8
Device ID code
Start byte format
Transfer start
0
1
1
1
0
ID
RS
R/W
Note:
The IM0/ID pin selects ID bit.
Table 29 RS and R/W Bit Function
RS
R/W
Function
0
0
Sets index register
0
1
Reads status
1
0
Writes instruction or RAM data
1
1
Reads RAM data
相關PDF資料
PDF描述
HD667B66R 132 x 176-dot Graphics LCD Controller/Driver for 65K Colors
HD66780FH LAMPS, STACKABLE INDICATOR
HD66780FS Dot Matrix Liquid Crystal Display Controller and Driver
HD66780 Dot Matrix Liquid Crystal Display Controller and Driver
HD66841 LVIC-II (LCD Video Interface Controller)(LCD視頻控制器)
相關代理商/技術參數
參數描述
HD667B66R 制造商:HITACHI 制造商全稱:Hitachi Semiconductor 功能描述:132 x 176-dot Graphics LCD Controller/Driver for 65K Colors
HD66840 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Peripheral IC
HD66840F25 制造商:未知廠家 制造商全稱:未知廠家 功能描述:LCD Controller
HD66840F30 制造商:未知廠家 制造商全稱:未知廠家 功能描述:LCD Controller
HD66841FP 制造商:未知廠家 制造商全稱:未知廠家 功能描述:LCD Controller
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*