參數資料
型號: HD407A4669
廠商: Hitachi,Ltd.
英文描述: Low-Voltage AS Microcomputers with On-Chip DTMF Generation Circuit(帶雙音多頻電路的低電壓微計算機)
中文描述: 低電壓如同在微機芯片的DTMF產生電路(帶雙音多頻電路的低電壓微計算機)
文件頁數: 71/142頁
文件大小: 894K
代理商: HD407A4669
HD404669 Series
71
Input capture timer operation: The input capture timer counts the clock cycles between trigger edges
input to pin EVND.
Either falling or rising edge, or both falling and rising edges of input signals can be selected as the
trigger input edge by detection edge select register 2 (ESR2: $027).
When a trigger edge is input to EVND, the count of timer D is written to timer read register D (TRDL:
$011, TRDU: $012), and the timer D interrupt request flag (IFTD: $003, bit 0) and the input capture
status flag (ICSF: $021, bit 0) are set. Timer D is reset to $00, and then incremented again. While
ICSF is set, if a trigger input edge is applied to timer D, or if timer D generates an overflow, the input
capture error flag (ICEF: $021, bit 0) is set. ICSF and ICEF are reset to 0 by MCU reset or by writing
0.
By selecting the input capture operation, pin R3
2
/TOD is set to R3
2
and timer D is reset to $00.
Registers for Timer D Operation:
By using the following registers, timer D operation modes are selected
and the timer D count is read and written.
Timer mode register D1 (TMD1: $010)
Timer mode register D2 (TMD2: $015)
Timer write register D (TWDL: $011, TWDU: $012)
Timer read register D (TRDL: $011, TRDU: $012)
Port mode register C (PMRC: $025)
Detection edge select register 2 (ESR2: $027)
Timer mode register D1 (TMD1: $010): Four-bit write-only register that selects the free-running/reload
timer function, input clock source, and the prescaler division ratio as shown in figure 50. Timer mode
register D1 (TMD1: $010) is reset to $0 by an MCU reset or in stop mode.
Writing to this register is valid from the second instruction execution cycle after the execution of the
previous timer mode register D1 (TMD1: $010) write instruction. Setting timer D’s initialization by
writing to timer write register D (TWDL: $011, TWDU: $012) must be done after a mode change
becomes valid.
When selecting the input capture timer operation, select the internal clock as the input clock source.
When designating external event input for the input clock, set bit 1 (PMRC1) of port mode register C
(PMRC) to 1.
相關PDF資料
PDF描述
HD404719FS Five timer/counters
HD404439FS Five timer/counters
HD4074719FS Five timer/counters
HD404439H Five timer/counters
HD404719 Five timer/counters
相關代理商/技術參數
參數描述
HD407A4669H 制造商:HITACHI 制造商全稱:Hitachi Semiconductor 功能描述:Low-Voltage AS Microcomputers with On-Chip DTMF Generation Circuit
HD407C4374 制造商:未知廠家 制造商全稱:未知廠家 功能描述:HMCS43XXFamily User's Manual/Device
HD407C4374FT 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:Low-Voltage AS Microcomputers with On-Chip A/D Converter
HD407C4384FT 制造商:未知廠家 制造商全稱:未知廠家 功能描述:4-Bit Microcontroller
HD407C4384S 制造商:未知廠家 制造商全稱:未知廠家 功能描述:4-Bit Microcontroller