- 您現在的位置：買賣IC網 > PDF目錄60777 > HD-2400M3-BH 2200 MHz - 2600 MHz RF/MICROWAVE 90 DEGREE HYBRID COUPLER PDF資料下載
參數資料
| 型號： | HD-2400M3-BH |
| 元件分類： | 耦合器 |
| 英文描述： | 2200 MHz - 2600 MHz RF/MICROWAVE 90 DEGREE HYBRID COUPLER |
| 文件頁數： | 8/9頁 |
| 文件大?。?/td> | 613K |
| 代理商： | HD-2400M3-BH |
34
sMounting Method
Figure 1.
Figure 3.
Figure 4.
Fastening screw
Microstrip board
Micro stripline
Tab
Figure 2.
The three types of mounting methods
illustrated in the diagrams below will
mount the card coupler for use under
optimum conditions.
The fastening screws in the diagrams
are M2 screws tightened to 1.5 kg cm.
When the tip of the micro stripline is of
Teflon type material ( r = 2.6), C
chamfering of C1 is performed at t1.6,
and of C0.5 at t1.2.
The side view diagrams of Figure 1 are
illustrated in Figures 2, 3, and 4 below.
Gap S between the card coupler and
the microstrip board surface should be
used to agree with the following
conditions.
Below 500 MHz ........S≤0.5 mm
500 to 2300 MHz......S≤0.25 mm
Above 2300 MHz......S≤0.15 mm
(
Metal plate or conductive spacer
qWhen the Ground Board is Constructed of 0.4 mm Stainless and 0.8 mm Aluminum
(When the Thickness of the Microstrip Board is 1.6 or 1.2 mm)
For t1.6 boards, use with the stainless case of the card coupler facing upward. For t1.2 boards,
use with the aluminum case of the card coupler facing upward. Mount and fix the card coupler
with fastening screws as illustrated in Figure 2. Next, solder the tabs and micro stripline, then
use.
(When the Thickness of the Microstrip Board is Greater than 1.6 mm)
Insert a metal plate or a conductive spacer between the coupler and ground, then mount as
illustrated in Figure 3 so that the surface of the tabs and the position of the microstrip board are
equal. Fix the card coupler with fastening screws as illustrated in Figure 3. Next, solder the tabs
and micro stripline, then use.
(When the Thickness of the Microstrip Board is Less than 1.2 mm)
Cut the ground at the position of the coupler and attach so that the surface of the tabs is in
contact with the micro stripline. Fix the card coupler with fastening screws as illustrated in Figure
4. Next, solder the tabs and micro stripline, then use.
∏
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
相關PDF資料 |
PDF描述 |
|---|---|
| HD-1500M3-GH | 1000 MHz - 2000 MHz RF/MICROWAVE 90 DEGREE HYBRID COUPLER |
| HD-0053M3-IH | 30 MHz - 76 MHz RF/MICROWAVE 90 DEGREE HYBRID COUPLER |
| HD-0900M3-CH-1 | 800 MHz - 1000 MHz RF/MICROWAVE 90 DEGREE HYBRID COUPLER |
| HD-0900M3-CH-2 | 800 MHz - 1000 MHz RF/MICROWAVE 90 DEGREE HYBRID COUPLER |
| HD-0900M3-CH | 800 MHz - 1000 MHz RF/MICROWAVE 90 DEGREE HYBRID COUPLER |
相關代理商/技術參數 |
參數描述 |
|---|---|
| HD24-12 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Analog IC |
| HD24-15 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Analog IC |
| HD24-24 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Analog IC |
| HD24-24-21SE | 制造商:TE Connectivity 功能描述:Connector |
| HD24-3.3 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Analog IC |
發布緊急采購，3分鐘左右您將得到回復。