- 您現(xiàn)在的位置：買賣IC網 > PDF目錄60777 > HD-0195M3-DH 160 MHz - 230 MHz RF/MICROWAVE 90 DEGREE HYBRID COUPLER PDF資料下載
參數資料
| 型號： | HD-0195M3-DH |
| 元件分類： | 耦合器 |
| 英文描述： | 160 MHz - 230 MHz RF/MICROWAVE 90 DEGREE HYBRID COUPLER |
| 文件頁數： | 9/9頁 |
| 文件大小： | 613K |
| 代理商： | HD-0195M3-DH |
35
For VE Items (in which Aluminum Is Used Above and Below the Ground Board and the
Eyelets Protrude Beyond the Cover)
The height of the cover will be a value 0.1 mm less than one half of the overall thickness.
For Directional Card Couplers
(HD-0900M (10 dB) and HD-0900M (20 dB),etc.)
The height of the cover will be a value 0.35 mm less than one half of the overall thickness.
(When Spacing H of the Micro Stripline Board and the Tabs is 0 ≤ H ≤ 0.3 mm)
Fix the card coupler with fastening screws as illustrated in Figure 2.
Next, solder the tabs and micro stripline, then use.
(When Spacing H of the Micro Stripline Board and the Tabs is H < 0)
Insert a metal plate or a conductive spacer between the coupler and ground, then mount as
illustrated in Figure 3 so that the surface of the tabs and the position of the microstrip board are
equal. Fix the card coupler with fastening screws as illustrated in Figure 3. Next, solder the tabs
and micro stripline, then use.
(When Spacing H of the Micro Stripline Board and the Tabs is H > 0.3 mm)
Cut the ground at the position of the coupler and attach so that the surface of the tabs is in
contact with the micro stripline. Fix the card coupler with fastening screws as illustrated in Figure
4. Next, solder the tabs and micro stripline, then use.
At the time of soldering, solder with a space of 1 mm from the edge of the micro
stripline as illustrated in Figure 5.
Figure 5.
Micro stripline board
Soldering portion
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
相關PDF資料 |
PDF描述 |
|---|---|
| HD-2400M3-BH | 2200 MHz - 2600 MHz RF/MICROWAVE 90 DEGREE HYBRID COUPLER |
| HD-1500M3-GH | 1000 MHz - 2000 MHz RF/MICROWAVE 90 DEGREE HYBRID COUPLER |
| HD-0053M3-IH | 30 MHz - 76 MHz RF/MICROWAVE 90 DEGREE HYBRID COUPLER |
| HD-0900M3-CH-1 | 800 MHz - 1000 MHz RF/MICROWAVE 90 DEGREE HYBRID COUPLER |
| HD-0900M3-CH-2 | 800 MHz - 1000 MHz RF/MICROWAVE 90 DEGREE HYBRID COUPLER |
相關代理商/技術參數 |
參數描述 |
|---|---|
| HD-0195M3-DH-1 | 制造商:HRS 制造商全稱:HRS 功能描述:3 dB 90∑ Card Couplers |
| HD-0195M3-DH-I | 制造商:HRS 制造商全稱:HRS 功能描述:3 dB 90∑ Card Couplers |
| HD01-G | 制造商:COMCHIP 制造商全稱:Comchip Technology 功能描述:Surface Mount Bridge Rectifier |
| HD01-T | 功能描述:橋式整流器 0.8A 100V RoHS:否 制造商:Vishay 產品:Single Phase Bridge 峰值反向電壓:1000 V 最大 RMS 反向電壓: 正向連續(xù)電流:4.5 A 最大浪涌電流:450 A 正向電壓下降:1 V 最大反向漏泄電流:10 uA 功率耗散: 最大工作溫度:+ 150 C 長度:30.3 mm 寬度:4.1 mm 高度:20.3 mm 安裝風格:Through Hole 封裝 / 箱體:SIP-4 封裝:Tube |
| HD01-T-CUT TAPE | 制造商:DIODES 功能描述:HD01 Series 0.8 A 100 V Bridge Rectifier Surface Mount - MDIP-4 |
發(fā)布緊急采購，3分鐘左右您將得到回復。