![](http://datasheet.mmic.net.cn/280000/H8PS_datasheet_16062187/H8PS_3.png)
Cam Positioner
H8PS
C-157
C
Specifications
I
Ratings/Characteristics
Cam Positioner
Mounting method
H8PS-8B(P):
H8PS-8PF(P): Surface/Track mounting
24 VDC
85% to 110% of rated voltage
Approx. 4 W
1
°
Increments (cam control precision, however, is within 2
°
: 256
°
rotational increments)
Up to 2 output signals can be set per cam
Encoder input: connections to a special absolute encoder (OMRON E6CP/E6F)
Response rotation speed:
Run mode: 330 min
1
max.
Switchable between high speed (60 to 330 min
1
) and low speed (60 min
1
max.)
Test mode: 60 min
1
max.
Includes malfunction data detection
Open-collector transistor output
NPN: H8PS-8B(F)
PNP: H8PS-8B(F)P
Cam outputs:
8 lines (Output No.1 to 8)
30 VDC max., 100 mA max. (residual voltage: 2 V max.)
RUN OUT:
Turns ON in Run and Test modes, OFF in Program mode in case of error
30 VDC max., 100 mA max. (residual voltage: 2 V max.)
TACHOMETER:60-ppr signal output for rpm meter
30 VDC max., 30 mA max. (residual voltage: 0.5 V max. for NPN models, 2 V max. for PNP
models)
100 m max.
Flush mounting
Rated supply voltage
Operating voltage range
Power consumption
Setting unit
Inputs
Outputs
Encoder cable extension dis-
tance
Output response time
Run mode: 0.5 ms max. under high speed designation
2.5 ms max. under low speed designation
Test mode: 5 ms max.
10 years (at 25
°
C)
Life expectancy of memory
back-up battery
Insulation resistance
Dielectric strength
Impulse withstand voltage
Noise immunity
100 M
min. (at 500 VDC) between current-carrying terminal and exposed, non-current-carrying metal part
1,000 VAC, 50/60 Hz for 1 min between current-carrying terminal and exposed, non-current-carrying metal part
1 kV between power terminals, 1.5 kV between current-carrying terminal and non-current-carrying metal part
±
480 V between power terminals for square-wave noise from noise simulator (pulse width: 100 ns/1
μ
s, 1 ns at
startup)
Destruction: 15 kV
Malfunction: 8 kV
Destruction: 10 to 55 Hz 0.75-mm single amplitude each in X, Y, and Z directions
Malfunction: 10 to 55 Hz 0.5-mm single amplitude each in X, Y, and Z directions
Destruction: 300 m/s
2
Malfunction: 200 m/s
2
LCD with back light
(EMI)
EN61326
Emission Enclosure:
EN55011 Group 1 class A
Emission AC mains:
EN55011 Group 1 class A
(EMS)
EN61326
Immunity ESD:
EN61000-4-2: 4 kV contact discharge (level 2)
8 kV air discharge (level 3)
Immunity RF-interference:
EN61000-4-3: 10 V/m (Amplitude-modulated, 80 MHz to 1 GHz) (level 3)
10 V/m (Pulse-modulated, 900 MHz
±
5 MHz) (level 3)
Immunity Conducted Disturbance:
EN61000-4-6: 10 V (0.15 to 80 MHz) (according to EN61000-6-2)
Immunity Burst:
EN61000-4-4: 2 kV power-line (level 3);
2 kV I/O signal-line (level 4)
Immunity Surge:
EN61000-4-5: 1 kV line to lines (power and output lines) (level 2);
2 kV line to ground (power and output lines) (level 3)
UL508, CSA C22.2 No.14
Operating: -10
°
C to 55
°
C (with no icing)
Storage:
-25
°
C to 65
°
C (with no icing)
Operating: 35% to 85%
Approx. 300 g
Static immunity
Vibration resistance
Shock resistance
Display method
EMC
Approved standards
Ambient temperature
Ambient humidity
Weight