參數資料
型號： GS9075A
廠商： Gennum Corporation
英文描述： GS1575A / GS9075A HD-LINX-R II Multi-Rate SDI Automatic Reclocker
中文描述： GS1575A / GS9075A的HD - LINX進程- R的第二多速率SDI自動時鐘恢復器
文件頁數： 22/29頁
文件大小： 403K
代理商： GS9075A
GS1575A / GS9075A Data Sheet
34716 - 0
December 2005
22 of 29
4.10 Lock and LOS
The LOCKED signal is an active high output which indicates when the PLL is
locked.
The internal lock logic of the GS1575A/9075A includes a system which monitors
the Frequency Acquisition Loop and the Phase Acquisition Loop as well as a
monitor to detect harmonic lock.
The LOS (Loss of Signal) output is an active HIGH output which indicates the
absence of data transitions at the DDIx input. In order for this output to be asserted,
transitions must not be present for a period of typically 5.14 us. After this output has
been asserted, LOS will deassert typically 5.14 us after the appearance of a
transition at the DDIx input. This timing relationship is shown in
Figure 4-4
:
Figure 4-4: LOS signal timing
NOTE: LOS is sensitive to transitions appearing at the input, and does not
distinguish between transitions caused by input data, and transitions due to noise.
4.11 Output Drivers and Serial Clock Outputs
The device’s serial digital data outputs (DDO/DDO) have a nominal voltage of
800mv single ended or 1600mV differential when terminated into a 50
Ω
load
.
The GS1575A/9075A may also be configured to output a serial clock at the data
output rate. The internal serial clock output block is powered via the SCO_ENABLE
pin. When SCO_ENABLE is connected to VCC, a differential serial clock output will
be present on SCO/SCO. Otherwise, when SCO_ENABLE is connected to GND,
the clock output block will be powered down and the device will have reduced
power consumption.
NOTE: The SCO_ENABLE signal should have a 1.5mA drive strength to maintain
a supply voltage of 3.3 +/- 0.165V.
Clock and data alignment is shown in
Figure 4-5
.
DATA
LOS
5.14 us
5.14 us
相關PDF資料
PDF描述
GS9075ACNE3 GS1575A / GS9075A HD-LINX-R II Multi-Rate SDI Automatic Reclocker
GS1578A GS1578A HD-LINX-R II Multi-Rate Dual Slew-Rate Cable Driver
GS1578ACNE3 GS1578A HD-LINX-R II Multi-Rate Dual Slew-Rate Cable Driver
GS1582 IC,MC14490P
GS1582-IBE3 IC,MOT,MC145026P, DIP-16, ENCODER 9 LINE SIMPLEX
相關代理商/技術參數
參數描述
GS9075ACNE3 制造商:GENNUM 制造商全稱:GENNUM 功能描述:GS1575A / GS9075A HD-LINX-R II Multi-Rate SDI Automatic Reclocker
GS9075BCNE3 制造商:Semtech Corporation 功能描述: 制造商:Semtech Corporation 功能描述:SD/ASI Reclocker
GS9075BCTE3 功能描述:RF, RFID, WIRELESS RoHS:是 類別:集成電路 (IC) >> 接口 - 驅動器，接收器，收發器 系列:* 標準包裝:250 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:3 V ~ 5.5 V 安裝類型:表面貼裝 封裝/外殼:16-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:16-TSSOP 包裝:帶卷 (TR)
GS9076 制造商:GENNUM 制造商全稱:GENNUM 功能描述:HD-LINX III SD-SDI Automatic Reclocker with Dual Differential Outputs
GS9076CNE3 制造商:Gennum Corporation 功能描述:IC CLOCK RECOVERY SD-SDI 64QFN
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*